User manual

4/8/16-CH DVR Quick Start Guide
8
Step 4: Select other channels and set timeline for them or select „Apply Settings
To All Channel and click “Copy” button to set the same settings for all channels.
7.3 Motion Based Recording
Motion detection based recording: when there is a motion event detected, the
camera will be triggered to record.
To Setup Motion Based Recording:
Step 1: Enter into MenuSetupScheduleMotion tab. The setup steps for
schedule for motion based recording are similar to normal schedule setup. You
can refer to 7.2 Schedule Recording for details.
Step 2: Enter into MenuSetupAlarmMotionMotion tab as shown below.
Step3: Enable motion alarm (Please specify to channel) and click „Apply‟ to save
settings.
Step4: Click „Setting‟ button under the Area to set Sensitivity and Detection area.
Left click the grid and drag to delete the area. Drag again to add area. You can
drag slide bar to set the sensitivity value (1-8). The higher the value is the more
sensitive it is to motion. Since the sensitivity is influenced by color and time (day
or night), you can adjust its value according to the practical conditions. Click
icon to set the whole area as detection area. Click icon to clear the set
detection area. Click icon to test the sensitivity as per the local conditions.
Once motion is sensed, it displays a figure icon. Click icon to save the
setting. Click icon to exit the current interface
VOOK