VOOK VOOK HD-SDI Digital video recorders VDT2704XD-P ; VDT2708XD-P ; VDT2716XD-P
DVR User Manual VOOK CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely. We do not warrant all the content is correct. The contents of this manual are subject to change without notice. This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using the same.
DVR User Manual VOOK Table of Contents 1 Introduction .................................................................................................................................................. 1 1.1 DVR Introduction ............................................................................................................................................................... 1 1.2 Main Features .........................................................................................................
DVR User Manual VOOK 4.2.1 Live ........................................................................................................................................................................................................ 21 4.2.2 Main Monitor .......................................................................................................................................................................................... 21 4.2.3 Mask ......................................................
DVR User Manual VOOK 4.8 P.T.Z Configuration .......................................................................................................................................................... 38 4.9 Advanced......................................................................................................................................................................... 42 4.9.1 Reset ..............................................................................................................
DVR User Manual VOOK 6.7.1 On LAN .................................................................................................................................................................................................. 53 6.7.2 On WAN ................................................................................................................................................................................................. 55 6.8 Remote Preview ................................................
DVR User Manual 1 VOOK Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
DVR User Manual VOOK Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 4/8/16 audio channels available Two record search mode: time search and event search Support 4 screen playback simultaneously Support deleting and locking the recorded files one by one Support
DVR User Manual Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
DVR User Manual 2 VOOK Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till the physical installation is complete. 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series supports eight SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting.
DVR User Manual VOOK Step2: Unscrew and take the barrier out of the front panel. Then connect the power and data cables. Finally, put the DVD with the holder into the case, let the screw holes of the case aim at the holder‟s and screw them firmly. Fig 2-2 Connect the DVD Writer 2.2 Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard.
DVR User Manual Name Description BACKUP button Info button Search button P.T.Z.
DVR User Manual Fig 2-3 Rear Panel for 4-CH Item 1 2 3 4 5 6 7 8 Name Alarm out Alarm in P/Z K/B HD SD Video in HDMI port VGA port LAN 9 USB port 10 11 12 13 14 CVBS Audio out MIC in Audio in E-SATA Description Relay Output. Connect to external alarm. Connect to external sensor Connect to speed dome. Y is TX+, Z is TX-. Connect to keyboard. A is TX+, B is TX-. HD SDI video signal inputs.
DVR User Manual Fig 2-4 Rear Panel for 8-CH Fig 2-5 Rear Panel for 16-CH Item 1 2 Name HD SD Video in Alarm in Description HD SDI video signal inputs.
DVR User Manual Item 3 4 5 Name HDMI port VGA port LAN 6 USB port 7 8 9 10 11 12 13 14 15 GND K/B P/Z CVBS Audio out MIC in Alarm out Audio in E-SATA Description Connect to high-definition display device VGA output, connect to monitor Network port To connect external USB devices like USB flash drive, USB HDD for backup or updating firmware. Grounding Connect to keyboard. A is TX+, B is TX-. Connect to speed dome. Y is TX+, Z is TX-. CVBS output Audio output, connect to the sound box Talk.
DVR User Manual Fig 2-6 Remote Controller Button Power Button Record Button -/-- /0-9 Digital Button Fn1 Button Multi Button Next Button SEQ Audio Switch Direction button Enter Button Menu Button Exit Button Focus/IRIS/Zoom/PTZ Preset Button Cruise Button Track Button Function Switch off—to stop DVR.
DVR User Manual Wiper Button Light Button Clear Button Fn2 Button Info Button Snap Button Search Button Cut Button Backup Button Zoom Button PIP Button VOOK To enable wiper function in PTZ mode To enable light function in PTZ mode To return to the previous interface Unavailable temporarily Get information about DVR like firmware version, HDD information To control playback.
DVR User Manual VOOK below steps: Activate remote controller to control the DVR: Turn the IR sensor of the remote controller towards the IR receiver on the front panel, press the number key 8 twice on the remote, then input device ID of the DVR to be controlled (Range from: 0-65535; the default device ID is 0) and press ENTER to confirm. You can check the device ID of a DVR from System SetupBasicDevice ID.
DVR User Manual VOOK Fig 2-7 Digital Numbers and Letters Input Window It supports mouse drag. For e.g. setting up motion detection area, click customized, hold down the left button and drag to set motion detection area. Setting up Schedule: hold left button and drag to set schedule time. In Playback: Click to choose the options. Right click to return to live mode. In Backup: Click to choose the options. Right click to return to previous picture.
DVR User Manual 3 VOOK Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR. 3.1.1 Startup Step1: Connect with the source power. Step2: The device will boot and the power LED would turn blue. Step3 A WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management.
VOOK DVR User Manual Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power 3.2 Login User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. Notice: The default user name and password is “admin” and 123456” For complete operational steps for changing password, adding or deleting users. Please refer to section 4.7 User Management Configuration. Fig 3-1 Login 3.
DVR User Manual VOOK 3.3.1 Live Playback Click Play button to play the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen.
DVR User Manual 4 VOOK Main Menu Setup Guide Click right mouse or press menu button on the front panel to display the menu tool bar on the bottom of the screen. Refer to Fig 4-1: Fig 4-1 Menu Toolbar icon beside the playback icon to select the time to playback. For example, if 2 minutes is selected and then click playback Click the button, it will start to playback from the past 2 minutes. Dwell: Dwell means to display live images from different cameras in a sequence.
VOOK DVR User Manual Fig 4-2(a) main menu Fig 4-2(b) System Setup 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3: Step2: In this tab you can setup the device name, device ID, video format, max network user, VGA resolution and language.
DVR User Manual VOOK Fig 4-3 Basic Configuration-Basic Show System Time: If selected, displays the current time during live monitoring. Max Online Users: To set the maximum number of concurrent user logins in the DVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. Video output: The resolution of live display interface, ranges from: VGA800*600, VGA1280*1024 and HDMI. Note： Switching between VGA and HDMI will change the menu output mode.
DVR User Manual VOOK 4.1.2 Date & Time Step1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 4-4: Step2: Set the date format, time format, time zone in this interface; checkmark “sync time with NTP server” to refresh NTP server date; user can also adjust system date manually. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface. Fig 4-4 Basic Configuration-Date &Time 4.1.3 DST Step1: Enter into MenuSetupBasicDST tab.
DVR User Manual VOOK 4.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 4.2.1 Live In this tab, user can setup camera name. Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name. Step2: Checkmark the Show Name when you set your camera name. Click “Default” button to restore the default setting, click “OK” button to save the setting.
DVR User Manual VOOK picture. Right click to exit. Click apply button to save the setting. Delete mask area: select a certain mask area and double click to delete that mask area. Then click apply button to save the setting.
VOOK DVR User Manual 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-9: Parameter Record Audio Meaning To enable/disable recording for the channel To enable/disable audio recording for the channel Fig 4-9 Record Configuration-Enable Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels. 4.3.
VOOK DVR User Manual Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically. Parameter Rate Resolution Quality Encode Max bit stream Meaning Range from: 1-30(NTSC)/1-25(PAL) Support 1080P The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 1536kbps~12288kbps Fig 4-10 Record Configuration-Record Bitrate 4.3.
VOOK DVR User Manual 4.3.4 Stamp Stamp：This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-12: Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time stamp at random positions. Refer to below Figures: Step3: Select “All” to setup all channels with the same parameters.
VOOK DVR User Manual 4.3.6 Snap In this interface, user can set up resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedule configuration includes three sub menus: schedule, motion and alarm. 4.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline.
VOOK DVR User Manual 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-15: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables motion based recording for 24x7.
VOOK DVR User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic tab. Refer to Fig 4-17: Step2: Enable channels by checking the checkboxes beside the desired channels. Step 3: Set the alarm type according to triggered alarm type. Two option: NO and NC. Step4: Click “Apply” button to save settings. Step5: Enter into Alarm Handling tab. Refer to Fig 4-18.
DVR User Manual VOOK To alarm out: If selected, this would trigger the external relay output on detecting a sensor based alarm. Email: If you select this option, the DVR will send an email alert to the preconfigured email address in case of a sensor based alarm from the particular input. Snap: If selected, the system will snap images of the checked channels on an alarm and save them in the HDD automatically. Step 7: Enter into To Record tab. Select recoding channels.
VOOK DVR User Manual Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 4.5.1 Sensor Alarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 4-22: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8). The higher the value is the more sensitive it is to motion.
VOOK DVR User Manual 4.5.3 Video Loss Step1: Enter into MenuSetupAlarmVideo Loss tab. Refer to Fig 4-24: Step2: The setup steps of video loss trigger are similar to alarm handling. You can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface. Fig 4-24 Video Loss 4.5.
VOOK DVR User Manual normal schedule setup; you can refer to 4.4.1 Schedule for details. This step is very important for alarm out. Even if you have enabled alarm out in the motion based alarm or sensor based alarm, you will not see the result of alarm out if no schedule is added here. Buzzer It is an inbuilt alarm output device. To setup Buzzer: Step1: Enter into MenuSetupAlarm out Buzzer tab; Step2: Checkmark Buzzer and set buzzer alarm hold time.
DVR User Manual VOOK password. Once the setup is completed, your DVR will automatically dial up into your network. Step 4: No matter what kinds of way to connect internet, you should test the effectiveness of the network by clicking “Test” button after you setup the network. Step 5: If the network is well connected, please click “Apply” button to save settings. 4.6.2 Sub-stream Step 1: Enter into MenuSetupNetwork Sub-stream tab.
DVR User Manual VOOK (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive address: Receiver‟s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: After selecting it, the system will attach images when sending the emails. Fig 4-29 Network Configuration-Email 4.6.4 Server This function is mainly used for connecting ECMS.
DVR User Manual VOOK as follows: Step 1: Select Other Settings tab. Enable DDNS server. Step2: Select DDNS server. Step 3: Input user name, password and host domain name registered in the DNS website (See the following example). Step 4: Click TEST to test the effectiveness of the relevant information. Step 5: Click “Apply” button to save the settings. Note: The domain name server that selected by user is a banding domain name of DVR.
DVR User Manual VOOK Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.
VOOK DVR User Manual DDNS server DDNS server User name Password Host domain Update interval Website provided by dynamic domain name supplier. The optional: www.meibu.com ， www.dyndns.com, www.no-ip.com and mintdns type. User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier‟s website. The interval time of upgrading DVR IP address 4.
DVR User Manual VOOK Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to fig 4-34. Fig 4-34 Add User-Authority If you want to delete the user, please select the user you want to delete in the user list box and then click “Delete” button. If you want to modify the user, please select the user you want to modify in the user list box and then click “Setup” button to modify its general information and authority.
DVR User Manual Fig 4-35 P.T.Z Configuration-Serial Port Definitions and descriptions of network stream: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
VOOK DVR User Manual Fig 4-36 P.T.Z Configuration-Advanced Fig 4-37 Advanced-Preset Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-38: User can control the dome by rotating up, down, left, right and adjust the rotating speed zoom, focus and iris of the dome; Select the serial number of the preset point. Click enable the PTZ wiper and click button to button to enable the PTZ light.
VOOK DVR User Manual dialog box as Fig 4-40: Click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click icons to adjust the position of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click Exit button to exit the current interface. Select a preset point in the cruise line list box.
DVR User Manual VOOK 4.9 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 4.9.1 Reset This would reset the system to factory defaults and reboot the DVR. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to DVR. 4.9.
DVR User Manual 5 VOOK Search，Playback & Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 5-1: Fig 5-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.
DVR User Manual VOOK button to play record. Use the playback toolbar to control the playback. Step4: Select the channel display mode and click Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. Playback Buttons The method of record backup during a certain period in the playback interface: Select the start time by dragging the slider and click period. Next, click icon.
DVR User Manual VOOK Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording. Step 4: Press “Search” button to display the searched event information in the event list box. Step 5: Double click the event item to play the record. 5.
DVR User Manual VOOK Fig 5-3 Search Configuration-File Management Lock: Select a file and click Lock button to lock this file. Once locked, the file cannot be deleted. Unlock: Select a locked file and click Lock button to unlock this file Delete: Select an unlocked file and click Delete button to delete this file. Step 4: Use “All” button to lock/unlock or delete all files in the file management column. Step 5: Double click an unlocked item to playback. 5.
DVR User Manual VOOK refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by built-in SATA DVD Writer or USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: Enter into main menu Backup interface.
DVR User Manual 6 VOOK Manage DVR 6.1 Check System Information Check system information includes six submenus: system, event, log, network, online user and record information. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this tab, you can search for events like motion, sensor and video loss. The utility provides an interface to have a date based and a channel based search.
DVR User Manual VOOK 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording, manual recording or schedule recording. 6.2 Manual Alarm In this interface, user can trigger a manual alarm. 6.3 Disk Management 1. Format the disk Step1: Enter into disk management tab. Note: Please format the hard disk before recording.
DVR User Manual VOOK Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button. It will upgrade automatically. Note: Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be reserved after upgrade. 6.5 Logoff Enter into Menu Logoff tab. A log off dialogue box will popup. The device will log off by clicking “OK” button.
DVR User Manual VOOK Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc. If using DHCP, please enable DHCP in both the DVR and router. Step 2: Forward IP address and port number in Virtual Server setup of the router or virtual server (If the user has enabled the UPnP function in both the DVR and router, he can skip this step). Configure the firewall to allow accessing the DVR. Note: Port forwarding settings may be different in different routers and server.
DVR User Manual VOOK 2. Connect the DVR to internet through PPPoE directly. Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password received from your ISP. Next, click „Apply‟. The DVR will connect to the server and would give a confirmation message. Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main menuInformationNetwork interface to check IP address).
DVR User Manual VOOK Third: Select “open in 32- bit mode”. 6.7.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
DVR User Manual VOOK Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.
DVR User Manual VOOK following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 6.7.2 On WAN There are also two ways for DVR to connect to Internet. 1.
VOOK DVR User Manual 6.8 Remote Preview Fig 6-2 Remote Live Preview Symbol and function Definitions: Channel indicator ① Snapping picture ④ Talk ⑦ Master/sub stream status ⑩ Note: Click ② ⑤ ⑧ Screen display mode Start IE record Playback ③ ⑥ ⑨ Volume Start manual record PTZ control button to record manual and the record file will be saved in user’s PC.
VOOK DVR User Manual Snap pictures The system will automatically capture pictures and save those pictures in the computer by clicking “Snap” the path for those picture in the ConfigurationLocal configuration. icon. User should set up PTZ control Please connect speed dome to the device via RS485 firstly. Make sure the protocol of the speed dome is supported by the device and is configured accordingly in the DVR.
DVR User Manual VOOK Auto scan Wiper button Light button Click the right mouse on the live interface to display a pull-down menu as below Fig 6-3 Right Key Sub Menu Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25fps(PAL)/30fps(NTSC)for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6fps(PAL)/7fps(NTSC)for every channel, but it requires low network bandwidth as compared to the master stream.
DVR User Manual VOOK 6.9 Remote Playback & Backup 6.9.1 Remote Playback button to enter into record playback interface. Refer to Fig 6-4: Click Select the record date and channels and double-click the file name in the record file list box. Then user can play that file and preview the picture. Fig 6-4 Play Record File Interface This DVR supports remote time search, event search and file management.
DVR User Manual VOOK Step1: Enter into SearchTime search. Refer to Fig 6-5: Fig 6-5 Time Search Interface Step 2: The highlight date in the area 2 indicates recorded data. Select the date in the area 2 and record channels in area3 Step 3: Click “Search” button.
DVR User Manual Fig 6-6 Playback by Event Search By Event Search: Step1: Enter into SearchEvent Search.
DVR User Manual Fig 6-7 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback File Management Step 1: Enter into SearchFile management.
DVR User Manual Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files.
DVR User Manual VOOK 6.9.2 Remote Backup Click Backup button to enter into backup interface. Refer to Fig 6-9: Fig 6-9 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC. 6.
DVR User Manual VOOK Fig 6-10 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 4 Main Menu Setup Guide for more details. 6.11 Tools Click on tool‟s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write properties and can also format the HDD remotely. 6.
DVR User Manual VOOK System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 6 System information for more details. Fig 6-11 Remote Information Search Note: There may be slight differences with respect to functions of remote surveillance between through IE and through Apple PC. Here we only take IE remote access for example.
DVR User Manual 7 VOOK Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberry OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. If you want to make mobile surveillance, please enable network service on the DVR first and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for five OS. 7.
VOOK DVR User Manual the server. Refer to the below picture on the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”. Refer to the below picture on the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 7.2 By Phones with Symbian OS Please use the smart phones with symbian version supported by this unit.
DVR User Manual VOOK Step2：Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer to the picture on the left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer to the picture on the right: Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program.
DVR User Manual Step9：Enter Live View, it will connect the server and display pictures. Refer to the picture on the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can snap pictures, change channels and control PTZ. Refer to the picture on the right: 7.3 By Phones with Iphone OS 1. Install through Iphone. Step 1: Open App Store function of Iphone. Step 2: Enable “search” function to search “Superlive”.
DVR User Manual Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically.
VOOK DVR User Manual Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one. 2. Install through PC.
VOOK DVR User Manual Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “Apply” button Operation Instruction for Superlive-Pro 1.
VOOK DVR User Manual Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
VOOK DVR User Manual Cruise 3. Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub To enter into the next interface To return to the previous interface Preset select the preset point Set the cruise line Speed Rotate speed of the PTZ Image View After the image is snapped, you can click icon to enter into the image view interface.
DVR User Manual 4. VOOK Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟ button to return to the previous interface. You can also search file to playback through time search, event search and remote file search. Please click the related button.
VOOK DVR User Manual 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click edit the server information and click icon to icon to delete this server information. 6. Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter four in respect of setting steps for more details.
DVR User Manual 7. VOOK Information View Interface Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc. In the online users interface, you can see the information of the current online users. 7.
DVR User Manual Step 1: Run Google Market program VOOK Step 2: Search “Supercam” Step 3: Press “Install” button Step 4: Click “OK” button Step 5: user can view the download and install process in notifications; once finishing downloading, the software will install automatically.
VOOK DVR User Manual Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
VOOK DVR User Manual Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Record Live audio Hide Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record playback 81
VOOK DVR User Manual Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click „Return‟ button to return to the previous interface.
DVR User Manual Alarm setting Storage setting Display setting If Audio alarm is enabled, when Video Loss/Sensor/Motion happen，sound alarm will be triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen，shake alarm will be triggered. User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. User can setup display order or display mode. Information view 7.5 By Phones with Blackberry OS 1.
DVR User Manual 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration.
VOOK DVR User Manual Note：When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->Supercam and click “Disable Compatibility” button. This problem will be solved. Login Enter server‟s IP address (or domain name), user‟s ID and password. button can quick input saved Click “Remember server” to save the setting; click server address, user name and password.
DVR User Manual Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
DVR User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset Mark 2 alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Select the preset point Group Server list Software configuration 87 Set the cruise line VOOK
DVR User Manual Information view 88 VOOK
DVR User Manual VOOK Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter b. The power from the adapter may be not enough for operating the DVR. Please use the power adaptor supplied along with the DVR. c. It could be a hardware problem. Q2. There is no menu displayed and only has live image display. a. Check whether the monitor is connected to the main video out and not the spot out.
DVR User Manual VOOK a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup. Please refer to Chapter 5. c. Maybe HDD is full and thus the DVR is not able to record. Check HDD information from Disk management and if required, please enable the recycle function. d. Check the attributes of the HDD. It might be set to read only mode. e. The HDD could have gone bad. Please change another one. Q7. Mouse does not work. a.
VOOK DVR User Manual b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: DVR displays “please wait…”all the time a. HDD power cable and data cable may not be well connected. Please check the connections for HDD. b. It is also possible that the DVR was forced to stop because HDD has a bad sector and it may have caused the system to halt. Check with a good known HDD or try formatting the existing HDD.
DVR User Manual VOOK Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller. Q11: A hard disk is being identified as a new device however it was being used with another DVR of same model.
VOOK DVR User Manual Fig 13-1 Fig 13-2 Q14. How to play the backup file? a. Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in NVR format, you must have already download the backup player box before doing backup. Then double click to open your USB disk to find your backup files and backup player. Double click b. icon to install backup player. After you install it, open this player and click “Open Path” button to open your backup file.
DVR User Manual 94 VOOK
VOOK DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the required size of hard disk according to the total recording duration and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings for CBR. Resolution 1080P Frame Rate Totally(FPS) Video Quality Bit Rate (kbps) Used Space(MB/h) 25(PAL)/ 30(NTSC) Highest Higher Medium Low Lower Lowest 12M 9M 7M 6M 4M 1.
DVR User Manual Appendix C 1. Compatible Devices Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2.
DVR User Manual 3. Compatible HDD list Brand Seagate Barracuda Seagate SV35.3 Seagate Pipeline HD.2 Maxtor Diamondmax HITACHI Deskstar WD WD1600JS Samsung HD161HJ Capacity 80G/160G/250G/320G /1.
DVR User Manual Appendix D VDT2704XD-P VOOK 4-CH Specifications Compression format Video output Video Input HDMI/VGA Resolution Record Resolution H.
DVR User Manual Appendix D VDT2708XD-P VOOK 8-CH Specifications Compression format Video output Video Input HDMI/VGA Resolution Record Resolution H.
DVR User Manual Appendix D VDT2716XD-P VOOK 16-CH Specifications Compression format Video output Video Input HDMI/VGA Resolution Record Resolution H.
VOOK 450011000337 A0
