User manual
Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
Step1: enter into system configurationother alarm; refer to Fig 4-27:
Fig4-27 other alarm
Disk full: user can choose the capacity of the disk storage
and select the related alarm. If the disk is full, the system
will alarm according to the setup.
IP conflict: if there is an IP address conflict within the same
network, the device will alarm after user selects buzzer and
the channel to alarm out.
Disconnect: if the disconnect happens, the device will the
device will alarm after the user selects buzzer and the
channel to alarm out.
Disk Warning: if the disk reduces, the system will send
email to the designated mailbox or alarm to notify the
reducing information after the user has selected the
corresponding function.
Step 2: select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some text
VOOK
VOOK professional monitoring