User manual

ManualsBrandsVook ManualsComputer equipmentVDT2424MD-H

DVR USER MANUAL

For 24 and 32-channel digital video recorder

VOOK

VOOK professional monitoring

Summary of content (110 pages)

PAGE 2
VOOK CAUTION  Please read this user manual carefully to ensure that you can use the device correctly and safely The contents of this manual are subject to change without notice  This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using. Kindly remove the cables from the power source if the device is not to be used for a long period of time.
PAGE 3
VOOK Table of Contents 1 Introduction ................................................................................................................................................... 1 1.1 DVR Introduction ..................................................................................................................................................................... 1 1.2 Main Features......................................................................................................................
PAGE 4
VOOK 4.2 Live configuration .................................................................................................................................................................. 20 4.2.1 Live ..................................................................................................................................................................................................................... 20 4.2.2 Main monitor .......................................................................
PAGE 5
VOOK 4.6.4 Other settings...................................................................................................................................................................................................... 37 4.7 User management configuration............................................................................................................................................ 40 4.8 P.T.Z configuration ...................................................................................
PAGE 6
VOOK 7.1.1 On LAN ............................................................................................................................................................................................................... 53 7.1.2 On WAN .............................................................................................................................................................................................................. 53 7.2 Remote Surveillance through Apple PC ..................
PAGE 7
VOOK 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., ensuring powerful functions and high stability.
PAGE 8
VOOK • • Support built-in SATA DVD writer to backup Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK • Record modes: Manual, Schedule, Motion detection and Sensor alarm recording • Support recycle after HDD full • Resolution, frame rate and picture quality are adjustable • 128MB for every video file packaging • Three record search mode: time search, event search and image search • Support 1/4/6/9/16 screen playback simultaneously • Support dele
PAGE 9
VOOK manual record, playback, PTZ control and remote live view • Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited NETWORK • Support TCP/IP, DHCP, PPPoE, DDNS protocol • Support IE browser to do remote view • Support setup client connection amount • Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
PAGE 10
VOOK 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series support four SATA hard drives or support three SATA hard drives plus one DVD writer. (User can also choose to install eight SATA hard drives or four SATA hard drives plus one DVD writer.
PAGE 11
VOOK Step 3: Install other three HDD according to above-mentioned method. Then cover the upper iron bar and screw it firmly.
PAGE 12
VOOK 2.1.2 Install DVD Step 1: Unscrew and open the case. Then unscrew the screws in the both sides to take out of the upper iron bar as shown below: Step 2: Install the DVD holder attached with the device. Please let the screw holes of the DVD aim at the holder’s. Try to place the holder farther away from the front and then screw firmly. Then, put the DVD with the holder into the case and let the screw holes of the case aim at the holder’s. Next, screw them firmly.
PAGE 13
VOOK 2.2 Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard. Item 1 2 3 Name Function Power Button DVD button Digital keys 0-9 Soft switch off to stop firmware running. Do it before power off. Press this button, user can place the DVD to do backup. Input number 1-9 or choose camera 1. represents decade number. 2. Indicates digital number 0. Eg.
PAGE 14
VOOK Name Item Function BACKUP SEARCH Function button Enter backup mode in live Enter search mode Rewind Fast forward Record manually Play/Pause / Esc 10 11 Jog dial USB port Stop/Esc Control rewind/fast forward/frame when playing the image. To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse 2.3 Rear Panel Instructions Fig2.
PAGE 15
VOOK Fig 2.2 Rear Panel for 32-Channel Item Name 1 Video out 2 Video in 3 POWER INPUT 4 Spot 5 6 7 8 Audio out MIC IN VGA port HDMI port 9 USB port 10 11 12 LAN E-SATA ALARM IN VOOK professional monitoring Description Connect to monitor Video input channels(from 1-24 for 24-ch DVR/ 1-32 for 32-ch DVR) AC 110Vor 110V Connect to monitor as an AUX output channel by channel.
PAGE 16
VOOK Item 13 14 15 16 17 18 Name ALARM OUT P/Z K/B Audio in POWER SWITCH FAN Description 4ch relay output. Connect to external alarm. Connect to speed dome Connect to keyboard 16 CH Audio input Switch on/off For cooling the device 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller Step2: Place batteries.
PAGE 17
VOOK Fig 2.3Remote Controller Item Name 1 2 3 4 5 6 7 8 9 10 11 Power Button INFOR Button REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button VOOK professional monitoring Function Soft switch off to stop firmware running. Do it before power off.
PAGE 18
VOOK Item Name Function 12 13 14 AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button To enable audio output in live mode To enter auto dwell mode To enter backup mode To control PTZ camera: Move camera/ZOOM/FOCUS/IRIS/SPEED control Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0. It’s not necessary to reset the device ID when a remote is to be used to control a single DVR.
PAGE 19
VOOK 2. Change a mouse to try. 2.5.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display. Click right button to show the control bar at the bottom of the screen. Here are all control and setup. Click right mouse again to hide the control bar. In setup: Click left button to enter. Click right button to cancel setup, or return to the previous. If you want to input the value, please move cursor to the blank and click.
PAGE 20
VOOK 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; then switch on the power button near the power port on the rear panel. Step2: the device will be loaded, and the power indicator will display blue. Step3 before start, a WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management.
PAGE 21
VOOK 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456. The concrete operation steps for change password, add or delete user please refer to User management configuration for more details. 3.
PAGE 22
VOOK 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen.
PAGE 23
VOOK 4 Main menu setup guide From the live screen, right click or press ESC button on the front panel to display the control bar at the bottom of the screen, refer to Fig 4-1: Fig 4-1 main menu toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Dwell: Dwell means to display live images from different cameras in a sequence.
PAGE 24
VOOK display Login window. Input the user name and password to logon the system interface as shown in Fig 4-2. To see the main menu, press MENU button on the front panel or operate with remote controller. Clicking Setup icon will pop-up the configuration menu: Fig 4-2 system setup 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.
PAGE 25
VOOK Password check: If enabled, the user would need to input the user name and the password for performing corresponding operations. Show time: display time in live.
PAGE 26
VOOK 4.1.3 DST Step1: enter into system configurationbasic configurationDST; refer to Fig 4-5: Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, main monitor, Spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.
PAGE 27
VOOK Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting; click “OK” button to save the setting. Step4: user can setup all channels with same parameters, tick off “all” to do relevant setup. Fig 4-7 live-color adjustment 4.2.
PAGE 28
VOOK 4.2.3 Spot Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9: Step2: select split mode: 1×1and channel. Step 3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step 4: while selecting the split mode, user can setup the current picture group. Click button to setup the previous channel groups of dwell picture, click to set the latter channel groups of dwell picture. button Fig 4-9 live configuration-Spot 4.2.
PAGE 29
VOOK Setup mask area live image mask area 4.3 Record configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11: Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
PAGE 30
VOOK 4.3.2 Record stream Step1: enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12: Step2: setup rate, resolution, quality, encode and max bit stream Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup. Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.
PAGE 31
VOOK Post-alarm record: set post recording time after the alarm is finished, options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s. Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted automatically. Step2: user can setup all channels with same parameters, and then tick off “all” to do relevant setup. Fig 4-13 record configuration-time 4.3.4 Stamp Stamp：User can overlap the channel name and time stamp on video.
PAGE 32
VOOK Before drag after drag 4.3.5 Recycle record Step1: enter into system configurationrecord configurationrecycle record; Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when HDD is full; if user disenables this function, it will stop recording when HDD is full. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
PAGE 33
VOOK Fig 4-15 schedule configuration-schedule Step2: select channel and double-click to pop up a dialog box as Fig 4-16. Now user can edit week schedule: Fig 4-16 schedule-week schedule Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting; click “Exit” button to exit current interface.
PAGE 34
VOOK Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.3 Sensor Step1: enter into system configurationschedule configurationalarm; refer to Fig 4-18: Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue.
PAGE 35
VOOK 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. ① Basic Step1: enter into system configurationalarm configurationsensorbasic; refer to Fig 4-19: Step2: enable sensor alarm and then set the alarm type according to triggered alarm type. Two option: NO and NC. Step3: user can setup all channels with same parameters, tick off “all” to do relevant setup.
PAGE 36
VOOK Step 3: If Buzzer is selected, there will be triggered buzzer alarm out. Full screen alarm: when alarm is triggered, there will pop up full screen alarm; Email: Select this function. When an alarm is triggered, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected channel.
PAGE 37
VOOK Step 2: enable motion alarm and set alarm hold time which means time interval between two adjacent detective motions. If there is other motion detected during the interval period, it is considered continuous movement; otherwise, it will be considered that those two adjacent detective motions are two different motion events. While clicking Trigger, a window will pop-up: Step 3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.
PAGE 38
VOOK Note: when users drag mouse to set motion detection area, they have to click firstly, and then make the operation. Step 6: user can setup all channels with same parameters. icon to clear all set detection area ② Schedule Step 1: enter into system configuration  alarm configuration  schedule; refer to Fig 4-25: Step 2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig3-25 alarm configuration-schedule 4.5.
PAGE 39
VOOK Fig 4-26 alarm configuration-video loss 4.5.4 Other alarm Step1: enter into system configurationother alarm; refer to Fig 4-27: Disk full: user can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will alarm according to the setup. IP conflict: if there is an IP address conflict within the same network, the device will alarm after user selects buzzer and the channel to alarm out.
PAGE 40
VOOK information on the lower right of the live image. 4.5.5 Alarm out Alarm out includes three sub menus: alarm out, schedule and buzzer ① Alarm out Step 1: enter into system configurationalarm out; refer to Fig 4-28: Step 2: in this interface, user can set relay alarm out name and select hold time which means the interval time between the two adjacent alarms. Step 3: user can setup all channels with same parameters.
PAGE 41
VOOK Server port: communication port. Step 3: If user selects the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway IP and DNS server. Step 4: enable PPPoE to directly connect the DVR to internet via ADSL, and then input the user name and password. Next, click TEST button to test the effectiveness of the relevant information. Fig 4-29 network configuration-network 4.6.
PAGE 42
VOOK Definitions and descriptions of Sub stream: Parameter FPS Resolution Quality Encode Max bit rate Meaning Range from: 1-25 Support CIF The quality of the clients’ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps 4.6.
PAGE 43
VOOK 4.6.4 Other settings Step 1: enable DDNS server: user needs to input user name， password and host domain name of the registered website, click TEST to test the effectiveness of the relevant information. Step 2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Note: The domain name server that selected by user is a banding domain name of DVR.
PAGE 44
VOOK If “Show icons for networked UPnP devices” can’t display in the “Network Tasks” list box, please follow the below operation:  Click “Tools”-- “Folder options”  Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． Domain name Registration （Take www.dyndns.com for example） Note: Users can self-define the hostname, username and password. Input www.dyndns.
PAGE 45
VOOK After user fill in the blank, click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Next, create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.
PAGE 46
VOOK （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client. ① Enter into Main menuNetworkother settings, tick off DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password. ② Enter into configuration interface of the router to map the server port and IP address (if the user enables UPnP function, he can skip this step).
PAGE 47
VOOK Fig 4-33 user management configuration Fig 4-34 add-general ① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK button. Then this user will be added into the user list box; click Exit button to exit the current interface. Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify computer; the, the user can log in DVR on the binding computer after set the specific binding MAC address.
PAGE 48
VOOK 4.8 P.T.Z configuration P.T.Z configuration includes two submenus: serial port and advance ① Serial port Step 1: enter into system configuration  P.T.Z configurationserial port; refer to Fig 4-36: Step 2: tick off Enable and then setup the value of address, baud rate and protocol according to the settings of the speed dome. Step 3: user can setup all channels with same parameters. Fig 4-36 P.T.
PAGE 49
VOOK Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a. in the preset set interface, while clicking Setting button, a dialog will pop-up as Fig 3-39: Fig 4-39 preset set-setting b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; c. select the serial number of the preset point. Click PTZ light.
PAGE 50
VOOK Fig 4-40 cruise set a. click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a dialog box as Fig 4-41: b. click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete to modify the setting of a preset point. User can click those icons to that preset point; click Modify icon adjust the position of preset point.
PAGE 51
VOOK a. user can control the dome rotates up, up left, down, right down, left, left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; click Start Record button to record the move track of PTZ; click this button again can stop record; click Start track button to play recorded track; click this button again can stop play. b. click icon to hide the tool bar, right-key can remerge it; click icon to exit the current interface. 4.
PAGE 52
VOOK 5 Record search & playback and backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time search Step1: enter into Search configurationtime search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: To search a record select date and channels on the right hand side and press the ‘Search’ button. A date with highlighted borderline indicates presence of data.
PAGE 53
VOOK Note: the vertical column means hours, horizontal column means channels. Step4: click Play button to playback record; click the relevant buttons on the screen to do operation: Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button, click this button, the whole interface can be expanded. 5.
PAGE 54
VOOK Step 2: while clicking Search button, the searched event information will displayed in the event list box. User can select date, channel and tick off Motion, Sensor or All accordingly. Step 3: double check a certain record file to playback. Note: when the monitor resolution is VGA800*600, the event search interface will appear a hide button, click this button, the whole interface can be expanded. 5.
PAGE 55
VOOK Delete: select an unlocked file and click Delete button to delete this file. Step 3: After clicking “All”, user can lock/unlock or delete all files in the file management column. Step 4: double click an unlocked item to playback. Note: when the monitor resolution is VGA800*600, the file management interface will appear a hide button, click this button, the whole interface can be expanded. 5.
PAGE 56
VOOK Fig 5-4 backup configuration VOOK professional monitoring
PAGE 57
VOOK 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to the set date. Note: if there are overlapping files, a “+” character will show behind the channel ID. 6.1.
PAGE 58
VOOK 6.3 Disk management 1. Format the disk Step1: enter into disk management interface Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: select a hard disk and click Format button to star format.
PAGE 59
VOOK 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
PAGE 60
VOOK This unit supports www.dns2p.com，www.meibu.com，www.dyndns.com，and www.no-ip.com. Step 5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8. 2.
PAGE 61
VOOK 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select ApplicationsRight click “Safari. App”Select “Get Info”. Third: Select “open in 32- bit mode”.
PAGE 62
VOOK 7.2.1 On LAN Step 1: After starting Apple computer, click Preferences””Internet &Wireless”click “Network” VOOK professional monitoring icon. The following window will pop up.
PAGE 63
VOOK Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
PAGE 64
VOOK Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue””Install” button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser.
PAGE 65
VOOK 7.3 The remote live preview interface ① ③ ⑤ Channel indicator Volume ② ⑥ Screen display mode Snapping picture Start IE record ⑧ Playback ⑩ PTZ control ④ ⑨ Start manual record Bidirectional talk Color ⑪ Master/sub stream status ⑦ Fig 7-2 Remote live preview interface Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode to see the channel select box.
PAGE 66
VOOK Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value. Buttons Description Drag the scroll bar to adjust the brightness of channel Drag the scroll bar to adjust the contrast of channel Drag the scroll bar to adjust the saturation of channel Drag the scroll bar to adjust the hue of channel Click this button to recover the default value of brightness, contrast, saturation and hue.
PAGE 67
VOOK 'Zoom' button. Click this camera. Click this camera. button near 'Zoom' button to zoom in the locale picture of button near 'Zoom' button to zoom out the locale picture of 'Focus' button. Click button near 'Focus' button to have long focus. Click button near 'Focus' button to have short focus.
PAGE 68
VOOK Enable audio: enable or disenable audio Full screen: In the full screen status, the live preview picture will display with full screen, the tool bar will be hided; double click left mouse or click right mouse to return Zoom in: Single channel large screen electronic amplification Left click the channel which needs to amplify; Click the right mouse, select Zoom in button and then click the left mouse to amplify the image. Press left mouse to drug the cursor, user can view the image.
PAGE 69
VOOK This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into Searchtime search; refer to Fig 7-5: Fig 7-5 time search interface Step2: click “Search” button.
PAGE 70
VOOK research, etc.
PAGE 71
VOOK Fig 7-7 event search interface Step2: click the highlight date, select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box. Double-click a certain item to playback.
PAGE 72
VOOK File Management Step1: Enter into Searchfile management; refer to Fig 7-8: Fig 7-8 file management interface Lock: select certain file item in the file list box and click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file and click “unlock” button to unlock this file Delete: select an unlock file and click “delete” button to delete this file from file list VOOK professional monitoring
PAGE 73
VOOK 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-9: Fig 7-9 remote backup interface Step1: select channels, set the start and end time, and then click “search’ button. The file information will be displayed in the file list box Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC.
PAGE 74
VOOK 7.5 Remote System configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters. When one user setup parameters of a certain item, others cannot setup this one.
PAGE 75
VOOK 7.6 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work. User can view information, such as username, IP address and so on. Enter into INFO→Log, user can set the start time to view the log record as follows: Fig 7-11 Remote information search Note: There may be subtle differences with respect to functions of remote surveillance between through IE and through Apple PC.
PAGE 76
VOOK 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
PAGE 77
VOOK Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Refer below picture in the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: please refer to below picture in the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.
PAGE 78
VOOK Symbian S60 5th Edition-Symbian OS v9.4 Symbian S60 5.1 Edition-Symbian OS v9.5 support support Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the left: Step3：A welcome window will pop up and requires a package. Click the software name to download.
PAGE 79
VOOK Step8：Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
PAGE 80
VOOK 8.3 The Software installation for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2. Enable “search” function to search “SuperCam” Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”.
PAGE 81
VOOK Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC.
PAGE 82
VOOK Step 3: Enable “search” function to search “SuperCam” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button VOOK professional monitoring
PAGE 83
VOOK Operation Instruction for SuperCam (iphone) 1. Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2. Main Interface 【Playback】【Log】 log record 【Live】 live view 【Information】【Logoff】 3.
PAGE 84
VOOK Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set the cruise line Speed Rotate
PAGE 85
VOOK 4. 5. Image view interface, refer below picture in the left: Record Playback interface, refer below picture in the right: Click the record file to playback. 6. Server list Interface, refer to below picture in the left: 7.
PAGE 86
VOOK Record file clip size: Single video size. When the video size is greater than setup value, change another video files Reserved disk space: Reserved SD Card disk space, when the disk space is less than setup value, the video will be stopped Display config： Display mode: User can select one live picture display or four live picture displays Remember display order: User can choose whether to remember display order or not. Alarm config：Select Audio Alarm.
PAGE 87
VOOK Step 1: run Google Market program Step 3: press “Install” button VOOK professional monitoring Step 2: search”SuperCam” Step 4: click “OK” button
PAGE 88
VOOK Step 5: user can view the download and install process in notifications. Finished downloading, the software will install automatically. Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
PAGE 89
VOOK 【Playback】 playback record file 【Log】 log record 【Live】 live view 【Information】【Logoff】 VOOK professional monitoring （Fig 2） image view 【Server List】 device list software setting 【Settings】【Help】 logoff and return to login interface device information view Live view ( Fig 1）【Image】 software help center
PAGE 90
VOOK Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Group Mark 2 Preset Select the preset point Set the cruise line Image view Previous Next Zoom out Delete Zoom in VOOK professional monitoring Return to main
PAGE 91
VOOK Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3）（Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list Config interface VOOK professional monitoring
PAGE 92
VOOK Alarm setting Tick off Sound Alarm ， when Video Loss/Sensor/Motion happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting Path Reserved disk space Video clip size Remove all recorder files before Information view VOOK professional monitoring User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SDCard/.
PAGE 93
VOOK 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically.
PAGE 94
VOOK Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration referring to the following figure in the left. (2) Enter into Menu->Option->Cache Operations to clear up browser cache.
PAGE 95
VOOK 8.5.2 Operation method for Blackberry mobile phone client 1. Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2. Main interface Playback Log Information Logoff Live 3.
PAGE 96
VOOK 4. Note: User can click Return button on the Blackberry phone to return the previous interface.
PAGE 97
VOOK Mark 1 Preset 5.
PAGE 98
VOOK 6. Software configuration 7.
PAGE 99
VOOK Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a. The power of the adapter is not enough.
PAGE 100
VOOK Q6. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to Record Configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
PAGE 101
VOOK ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins” refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block ActiveX. Please uninstall or close them.
PAGE 102
VOOK First possible reason: hard-disk cable and data cable are not well connected.
PAGE 103
VOOK RAM VGA OS DirectX 512M NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300 Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA 9.0 Q13: What are the PC configurations for 16-ch real time product with fully open channel mainstream? PC Module Parameters CPU Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip HDD 80G RAM 1GB VGA GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 OS Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA DirectX 9.
PAGE 104
VOOK b. Right click IE browser (refer to Fig 14-2), select Run as administrator to run browser.
PAGE 105
VOOK Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Resolution D1 CIF Frame Rate 30（NTSC） 25（PAL） 30（NTSC） 25（PAL） Video Quality highest Higher Medium Low Lower Highest Higher Medium Low Lower Lowest Bit Rate(kbps) 2048 1536 1024 768 512 1024 768 512 512 384 256 Used Space（MB/h） 915 700 465 297 241 450 337.5 225 225 168.
PAGE 106
VOOK Appendix C Compatible Devices 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB Tab C.1 Compatible USB drive 2. Compatible SATA CD/DVD writers after test Brand TECLAST BENQ LITEON LITEON SAMSUNG VOOK professional monitoring Model GH22NP20/TL-22XD DW220S-0K4 DH—20A6S01C DH-20A4P02C TS-H653B Tab C.
PAGE 107
VOOK 3. Compatible HDD list Seagate Barracuda LP ST3200542AS 2TB Seagate Barracuda 7200.11 ST31500341AS 1.5T Seagate SV35.3 ST31000340SV 1T Seagate Pipeline HD.2 500G Seagate Barracuda 7200.10 320G Seagate Barracuda 7200.10 ST3250310AS 250G Seagate Barracuda 7200.11 ST3160813AS 160G Seagate Barracuda 7200.
PAGE 108
VOOK VDT2424MD-H 24-CH Specifications Compression format Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video Input VGA Resolution Record Resolution Composite：1.0V p-p/75Ω BNC×24 1280*1024 /1024*768/ 800*600 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate Record Frame Rate Audio Input Audio output Alarm Input Alarm output: Record Mode Simplex/Duplex/Triplex Network Interface PTZ control Communication interface Disk info Remote controller Power Supply Standard H.
PAGE 109
VOOK VDT2432MD-H 32-CH Specifications Compression format Video output Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video Input VGA Resolution Record Resolution Composite：1.
PAGE 110
VOOK 450011220001 A0 VOOK professional monitoring