User manual

DVR User Manual

4.3 Record Configuration

Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.

4.3.1 Enable

Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-10:

Fig 4-10 Enable Record

Step2: Checkmark record and audio.

Step3: Select All to setup the same settings for all channels.

4.3.2 Record Bitrate

Step1: Enter into MenuSetupRecordRecord bit rate tab. Refer to Fig 4-11:

Step2: Setup rate, resolution and quality.

Step3: Select ―All‖ to set same settings for all channels.

Step4: Click ―Default‖ button to restore default setting; click ―Apply‖ button to save the setting; click ―Exit‖ button to exit the current

interface.

Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

Parameter

Meaning

Record

To enable/disable recording for

the channel

Audio

To enable/disable audio

recording for the channel

VOOK