User manual

DVR User Manual

4.2.2 Main Monitor

Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-8:

Step2: Select split mode: 1×1、2×2、2×3、3×3、4×4 and channel. Click button to setup

the previous channel group. Click button to set the latter channel group.

Step3: Set the dwell time.

Step5: Click ―Default‖ to restore default setting; click ―Apply‖ to save the setting; click

―Exit‖ to exit the current tab.

Fig 4-8 Main Monitor

4.2.3 Mask

You can setup private mask area (3 areas at most) on the live image picture.

Setup mask area: Click Setting button, enter into live image to press left mouse and drag mouse to set mask area. Please refer to the

below picture. Right click to exit. Click Apply button to save the setting.

Delete mask area: Select a certain mask area and double click to delete that mask area. Then click Apply button to save the setting.

Fig 4-9 Mask Setup Mask Area Live Image Mask Area

VOOK