VOOK DVR USER ......
DVR User Manual VOOK CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using the same.
DVR User Manual VOOK Table of Contents 1 Introduction .................................................................................................................................................. 1 1.1 DVR Introduction ............................................................................................................................................................... 1 1.2 Main Features .........................................................................................................
DVR User Manual VOOK 4.2.3 Mask ...................................................................................................................................................................................................... 19 4.3 Record Configuration........................................................................................................................................................ 20 4.3.1 Enable ..................................................................................
DVR User Manual VOOK 4.9.3 Block/Allow list ....................................................................................................................................................................................... 37 5 Search, Playback & Backup ........................................................................................................................ 38 5.1 Time Search ..............................................................................................................
DVR User Manual VOOK 7.4.1 Remote Playback...................................................................................................................................................................................... 55 7.4.2 Remote Backup ........................................................................................................................................................................................ 61 7.5 Remote System Configuration .........................................
DVR User Manual VOOK 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
DVR User Manual VOOK RECORD & PLAYBACK Record modes: Manual, schedule and motion detection alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 2 audio channels available Two record search mode: time search and event search Support 4/8/16 screen playback simultaneously 4 CH DVR supports full D1 real-time recording; 8 CH DVR supports 4D1+4CIF recording; 16 CH DVR supports full CIF real-time recording Support deleting and locking the record
DVR User Manual NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
VOOK DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‘t power up the unit till the physical installation is complete. 2.1 Install Hard Drive Notice: 1. This series support one SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting. Please refer to ― Appendix B Calculate Recording Capacity‖.
DVR User Manual Name Description REC Net Power Fn When recording, the light is blue When access to network , the light is blue Power indicator, when connection , the light is blue Switch the output between VGA and BNC To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse USB port 2.
DVR User Manual Item 7 8 9 10 Name LAN USB port DC12V RS485 Description Network port Connect USB mouse or connect external USB devices POWER INPUT Connect to speed dome or keyboard（A is TX+, B is TX-） Fig 2-4 Rear Panel for 8-ch Item 1 2 3 4 5 6 7 8 9 10 Name Audio in Video in Audio out Video out VGA port HDMI port LAN USB port DC12V RS485 Description 2-CH Audio inputs Video input channels from 1-8 Audio output, connect to the sound box Connect to monitor VGA output, connect to monitor Connect to high-
DVR User Manual Fig 2-5 Rear Panel for 16-ch Item 1 2 3 4 5 6 7 8 9 10 Name Audio in Video in Audio out Video out HDMI port VGA port LAN USB port DC12V RS485 Description 2-CH Audio inputs Video input channels from 1-8 Audio output, connect to the sound box Connect to monitor Connect to high-definition display device VGA output, connect to monitor Network port Connect USB mouse or connect external USB devices POWER INPUT Connect to speed dome or keyboard（A is TX+, B is TX-） 2.
DVR User Manual VOOK Replace the battery cover. Note: Remote controller can be selected depending on the product model. Here we will take the bigger remote controller as an example to describe. Fig 2-6 Remote Controller Button Power Button Record Button -/-- /0-9 Digital Button Fn1 Button Function Switch off—to stop DVR.
DVR User Manual Multi Button Next Button SEQ Audio Switch Direction button Enter Button Menu Button Exit Button Focus/IRIS/Zoom/PTZ Preset Button Cruise Button Track Button Wiper Button Light Button Clear Button Fn2 Button Info Button Snap Button Search Button Cut Button Backup Button Zoom Button PIP Button VOOK To choose multi screen display mode To switch the live image To enter into auto dwell mode To enable audio output in live mode To switch the output between BNC and VGA To move cursor in setup or p
DVR User Manual VOOK panel. Then you can press preset, cruise, track, wiper or light button to enable the relevant function. Note: Key points to check in case the remote doesn‘t work. 1. Check batteries polarity. 2. Check the remaining charge in the batteries. 3. Check IR controller sensor for any masking. 4. Check the ID of the remote with respect to the DVR. If it still doesn't work, please try using a good known remote, or contact your dealer.
DVR User Manual VOOK 1. Make sure the mouse is plugged in the USB mouse port not the USB port on the front panel. 2. Try with a good know mouse. 2.5.2 Use Mouse During live: Double-click on any camera window for the full screen mode. Double-click again to return to the previous screen mode. Right click to reveal the control menu on the screen. Right click to hide the control menu. In Configuration: Click to enter a particular option. Right click to cancel the option or to return to the previous menu.
DVR User Manual VOOK 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR. 3.1.1 Startup Step1: Connect with the source power. Step2: The device will boot and the power LED would turn blue. Step3 A WIZZARD window will pop up and show some information about time zone，time setup，network configuration, record configuration and disk management.
VOOK DVR User Manual 3.2 Login User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. Notice: The default user name and password is ― admin‖ and 123456‖ For complete operational steps for changing password, adding or deleting users， please refer to section 4.7 User Management Configuration. Fig 3-1 Login 3.
DVR User Manual VOOK 3.3.1 Live Playback Click Play button to play the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen.
DVR User Manual VOOK 4 Main Menu Setup Guide Click right mouse or press FN button on the front panel to display the control bar on the bottom of the screen as Fig 4-1: Fig 4-1 Main Menu Toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Click icon to set up picture-in-picture. Click the icon beside the playback icon to select the time to playback.
VOOK DVR User Manual Fig 4-2 Main Menu Setup 4.1 Basic configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3: Step2: In this interface you can setup the device name, device ID, video format, max network user, VGA resolution and language.
VOOK DVR User Manual Max Online Users: To set the maximum number of concurrent user logins in the DVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. VGA resolution: The resolution of live display interface. Note： Switching between VGA/HDMI and CVBS will change the menu output mode. Please connect to relevant monitor. Language: To setup the menu language.
VOOK DVR User Manual 4.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name.
VOOK DVR User Manual 4.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-8: Step2: Select split mode: 1×1、2×2、2×3、3×3、4×4 and channel. Click button to setup button to set the latter channel group. the previous channel group. Click Step3: Set the dwell time. Step5: Click ― Default‖ to restore default setting; click ― Apply‖ to save the setting; click ― Exit‖ to exit the current tab. Fig 4-8 Main Monitor 4.2.
VOOK DVR User Manual 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-10: Parameter Record Audio Meaning To enable/disable recording for the channel To enable/disable audio recording for the channel Fig 4-10 Enable Record Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels. 4.3.
VOOK DVR User Manual Parameter Rate Resolution Quality Encode Max bit stream Meaning Range from: 1-30（NTSC）1-25(PAL) Support CIF , HD1, D1 The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 256kbps~2Mpbs Fig 4-11 record configuration-record bit rate 4.3.3 Time Step1: Enter into MenuSetupRecordTime tab. Refer to Fig 4-12: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e.
VOOK DVR User Manual 4.3.4 Stamp Stamp：This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp interface. Refer to Fig 4-13: Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time stamp at random positions. Refer to below Figures: Step3: Select ― All‖ to setup all channels with the same parameters.
VOOK DVR User Manual 4.3.6 Snap In this tab, user can set up Resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedule configuration includes two sub menus: schedule and motion. 4.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline. Step1: Enter into MenuSetupSchedule tab.
VOOK DVR User Manual 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-16: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables motion based recording for 24x7.
DVR User Manual VOOK Step3: Enter into Alarm Handling tab and select hold time and then click Trigger button. A dialog box will pop-up as Fig 4-18: Step4: Enter into alarm tab to select the options to handle alarm and then click OK. Buzzer: If selected, the local inbuilt buzzer would be activated on an alarm. Show Full Screen: If selected, there will pop up the chosen channel on the monitor on an alarm trigger.
VOOK DVR User Manual Step8: Select ― All‖ to setup all channels with the same parameters. Step9: Click ― Apply‖ button to save the settings. Step10: Enter into Schedule tab. The setup steps for schedule for motion based alarm are similar to normal schedule setup; Please refer to 4.4.1 Schedule for details. This step is very important for motion based alarm.
VOOK DVR User Manual If the threshold value is reached, the system will trigger the Disk Full Alarm. Click ― Apply‖ to save settings; Click ― Exit‖ to exit the current interface. 4.5.4 Alarm Out To setup alarm out: Enter into MenuSetupAlarm out tab. Refer to Fig 4-23: It is an inbuilt alarm output device. To setup Buzzer: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer when the system is in alarm. Fig 4-23 Alarm Out 4.
DVR User Manual VOOK Then the device will distribute IP address, subnet mask, and gateway IP and DNS server. If you want to configure your own settings, please input the IP address, Subnet mask, Gateway DNS server manually. You can also check the PPOE checkbox to enable this feature and then enter username and password. Once the setup is completed, your DVR will automatically dial up into your network.
DVR User Manual VOOK 4.6.3 Email Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 4-26: SMTP Server/Port: The name and port number of SMTP server. Check the SSL checkbox if the server requires a secure connection (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‘s email address/password Receive address: Receiver‘s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox.
VOOK DVR User Manual 4.6.5 Other Settings If your DVR is setup to use PPPoE as its default network connection, you may setup DDNS to be used in connection. The setting steps are as follows: Step 1: Select Other Settings tab. Enable DDNS server. Step2: Select DDNS server. Step 3: Input user name, password and host domain name registered in the DNS website (See the following example). Step 4: Click TEST to test the effectiveness of the relevant information.
DVR User Manual VOOK Click‖ Create Account‖ button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click ― sign up for trial‖ button. Now, according to the domain name registration of ― DDNS‖，the domain name for DVR is ― abc.dyndns.
DVR User Manual DDNS server User name Password Host domain Update interval VOOK DDNS server Website provided by dynamic domain name supplier. The optional: www.meibu.com ，www.dyndns.com, www.no-ip.com and mintdns type. User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier‘s website. The interval time of upgrading DVR IP address 4.
DVR User Manual VOOK Fig 4-31 Add User-Authority If you want to delete the user, please select the user you want to delete in the user list box and then click ― Delete‖ button. If you want to modify the user, please select the user you want to modify in the user list box and then click ― Setup‖ button to modify its general information and authority. If you want to change password of a user, please select the user in the user list box and then click ― Change Password‖ button. 4.8 P.T.Z Configuration P.T.
DVR User Manual Fig 4-32 P.T.Z Configuration-Serial Port Definitions and descriptions of network stream: Parameter Address Baud rate Protocol Simulative Cruise Meaning The address of the PTZ device Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
VOOK DVR User Manual Fig 4-33 P.T.Z Configuration-Advanced Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-35: User can control the dome by rotating up, down, left, right and adjust the rotating speed zoom, focus and iris of the dome; Select the serial number of the preset point. Click enable the PTZ wiper and click Fig 4-34 Advanced-Preset button to button to enable the PTZ light.
VOOK DVR User Manual Click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click icons to adjust the position of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click Exit button to exit the current interface. Select a preset point in the cruise line list box.
DVR User Manual VOOK 4.9.1 Reset This would reset the system to factory defaults and reboot the DVR. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to DVR. 4.9.3 Block/Allow list Fig 4-39 Block/Allow List Here authorized user can prohibit computer users within a certain IP address range from accessing DVR or allow computer users within a certain IP address range to access DVR.
DVR User Manual VOOK 5 Search, Playback & Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 5-1: Fig 5-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press ― Search‖ button. A date with highlighted borderline indicates presence of data.
DVR User Manual Step4: Select the channel display mode and click VOOK button to play record. Use the playback toolbar to control the playback. Playback buttons Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the ― Expand to‖ button to expand the whole interface. The method of record backup during a certain period in the playback interface: Select the start time by dragging the slider and click period. Next, click icon.
DVR User Manual Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion. You can search for motion based recording. Step 4: Press ― Search‖ button to display the searched event information in the event list box. Step 5: Double click the event item to play the record. 5.3 File Management Step1: Enter into MenuSearchFile Management tab.
DVR User Manual VOOK Fig 5-3 Search Configuration-File Management Step 2: Select date and channels. The date with highlighted borderline indicates presence of data. Step 3: Press ― Search‖ button to display the searched files in the file list box. Lock: Select a file and click Lock button to lock this file. Once locked, the file cannot be deleted. Unlock: Select a locked file and click Lock button to unlock this file Delete: Select an unlocked file and click Delete button to delete this file.
DVR User Manual VOOK Note: In order to take images on alarm, the snapshot feature should be activated in ― Alarm Handling‖ for different kind of alarms. Please refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: Enter into main menu Backup interface.
DVR User Manual VOOK 6 Manage DVR 6.1 Check System Information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this tab, you can search for events like motion and video loss. The utility provides an interface to have a date based and a channel based search.
DVR User Manual VOOK Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. . 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including motion based recording, manual recording or schedule recording. 6.2 Disk Management 1. Format the disk Step1: Enter into disk management tab. Note: please format the hard disk before recording.
DVR User Manual VOOK Step 2: Connect the USB flash drive to the USB port. Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button. It will upgrade automatically. Note: Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be reserved after upgrade. 6.4 Logoff Enter into Menu Logoff tab. A log off dialogue box will popup.
DVR User Manual VOOK 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR‘s Main MenuSetupNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
DVR User Manual VOOK Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to FAQ Q8. Fig 7-1 View with IE Browser 2. Connect the DVR to internet through PPPoE directly.
DVR User Manual VOOK Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main menuInformationNetwork interface to check IP address). Step 3: If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the DVR or router. Then add to the DVR or router. Step 4: The following setting steps are as the same as Step3 and Step4 in Point 1. 7.
DVR User Manual VOOK Third: Select ― open in 32- bit mode‖. 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select ― System Preferences‖‖Internet &Wireless‖click ― Network‖ Step 2: Enter into Network interface and then click ― Ethernet Connected‖ to check the internet connection of Apple PC.
DVR User Manual VOOK Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‘s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.
DVR User Manual VOOK the following window will pop up： Input the name and password of Apple PC and then click ― OK‖ to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select ― Quit‖ button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 7.2.
VOOK DVR User Manual 7.
DVR User Manual VOOK button to record manual and the record file will be saved in user’s PC. Note: Click Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel view for example: user can checkmark 8 channels form 1-ch to 16-ch at random to display the live pictures. A maximum of 16 channels can be selected. Then Fig 7-3 Channel Selection click OK button to confirm the setting.
VOOK DVR User Manual Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button. Click button near 'Iris' button to increase light of the dome. Click near 'Iris' button to decrease light of the dome.
DVR User Manual VOOK Fig 7-4 Right Key Sub Menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps（PAL）/30 fps（NTSC）for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, but it requires low network bandwidth as compared to the master stream. Therefore, users can select the stream according to their bandwidth.
DVR User Manual Fig 7-5 Play Record File Interface This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchTime search.
DVR User Manual VOOK Fig 7-6 Time Search Interface Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record channels in area③ Step3: Click ― Search‖ button. The record data will be displayed in the data information list box; Step 4: Set the Start time and display mode in the area① as required Step 5: Click ― play‖ button to playback Step 6: Click the relevant buttons in the interface for operation, like FF, pause, change channel mode, research, etc.
DVR User Manual Fig 7-7 Time Search Playback By Event Search: Step1: Enter into SearchEvent Search.
DVR User Manual Fig 7-8 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion. Step 4: The events will be display in the event list box by clicking Search button.
DVR User Manual File Management Step 1: Enter into SearchFile management. Refer to Fig 7-9: Step 2: Select highlighted date and channels. Step 3: Click ― Search‖ button to search the recorded files.
DVR User Manual VOOK 7.4.2 Remote Backup Click Backup button to enter into backup interface. Refer to Fig 7-10: Fig 7-10 Remote Backup Interface Step1: Select channels, set the start and end time and then click ― search‘ button to display the file information in the file list box Step2: Select backup files and click ― browse‖ button to set the path. Then click ― backup‖ button to start backup. The backup files will be saved on user‘s PC. 7.
DVR User Manual VOOK configuration, alarm configuration, network configuration, PTZ configuration and user configuration. You should select an option from the menu list on the left and then setup the relative parameters. Only one user can do configuration setup at a given point of time. Click Config tab to enter into the below interface as Fig 7-11: Fig 7-11 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR.
DVR User Manual VOOK 7.7 Remote Information The Info tab provides a web based interface to access the general information pertaining to the DVR‘s settings. It includes five submenus: System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 6 System information for more details.
DVR User Manual VOOK 8 Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberry OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. If you want to make mobile surveillance, please enable network service on the DVR first and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for five OS. 8.
VOOK DVR User Manual Channel‖. Refer to the below picture on Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of ― the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian OS Please use the smart phones with symbian version supported by this unit.
DVR User Manual VOOK Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer to the picture on the right: Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program. It will enter a function interface. Refer to the picture on the left: Step7：Click System setting--->Login Setting to enter login interface.
DVR User Manual 8.3 By phones with iPhone OS 1. Install through iPhone. Step 1. Open App Store function of iPhone. function to search ― Superlive‖. Step 2.
DVR User Manual Step 3: Click Superlive-pro, enter into ― introduce‖ interface and then click ― FREE‖, it will change into ― INSTALL‖ Step 4: Input iTunes Store password and then click ― OK‖. The software will be installed automatically.
DVR User Manual VOOK Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one. 2. Install through PC.
DVR User Manual Step 3: Enable ―s earch‖ function to search ― Superlive-pro‖ Step 4: Click ― free application‖ button Step 5: Input apple ID and password, then click ― acquire‖ Step 6: Checkmark ― synchronously apply program‖ and ― Superlive-pro‖, and then click ― Apply‖ button Operation Instruction for Superlive (iPhone) 1.
VOOK DVR User Manual Enter server‘s IP address (or domain name), user name and password Click ― Remember server‖ to save the setting; click button can quick input saved server address, user name and password. 2.
VOOK DVR User Manual Cruise 3. Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub To enter into the next interface To return to the previous interface Preset select the preset point Set the cruise line Speed Rotate speed of the PTZ Image View After the image is snapped, you can click icon to enter into the image view interface.
DVR User Manual 4. VOOK Playback icon to enter into the playback interface. Then click ‗Search‘ button, select the time and channel to playback and click Click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click ‗Close‘ button to return to the previous interface. You can also search file to playback through time search, event search and remote file search. Please click the related button.
VOOK DVR User Manual 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click edit the server information and click icon to icon to delete this server information. 6. Configuration interface icon to enter into Settings interface. You can set many properties, such as Click local, basic, live, record, schedule, alarm, network, etc. Please see chapter four in respect of setting steps for more details. 7.
DVR User Manual VOOK Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc. In the online users interface, you can see the information of the current online users. 8.
DVR User Manual Step 3: Press ― Install‖ button VOOK Step 4: Click ― OK‖ button Step 5: User can view the download and install process in notifications; Once finishing downloading, the software will install automatically.
VOOK DVR User Manual Enter into server‘s IP address (or domain name), user‘s ID and password. button can quick input saved server address, user name and password.
VOOK DVR User Manual Live view Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Record Live audio Hide Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete 78
VOOK DVR User Manual Record playback Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click ‗Return‘ button to return to the previous interface.
DVR User Manual Alarm setting Storage setting Display setting If Audio alarm is enabled, when Video Loss/Motion happen，sound alarm will be triggered; If shake Alarm is enabled, when Video Loss/Motion happen，shake alarm will be triggered. User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. User can setup display order or display mode. Information view 8.5 By Phones with Blackberry OS 1.
DVR User Manual 2. Click ― Supercam‖ to link 3. Click ― Download‖ button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration.
VOOK DVR User Manual Note：When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->Supercam and click ― Disable Compatibility‖ button. This problem will be solved. Login Enter server‘s IP address (or domain name), user‘s ID and password. button can quick input saved server Click ― Remember server‖ to save the setting; click address, user name and password.
DVR User Manual Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
DVR User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset Mark 2 alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Select the preset point Group Server list 84 Set the cruise line VOOK
DVR User Manual Software configuration Information view 85 VOOK
DVR User Manual VOOK Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter b. The power from the adapter may be not enough for operating the DVR. Please use the power adaptor supplied along with the DVR. c. It could be a hardware problem. Q2. There is no menu displayed and only has live image display. a. Check whether the monitor is connected to the main video out and not the spot out.
DVR User Manual VOOK a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‘t enabled the record function or has done incorrect setup. Please refer to Chapter 5. c. Maybe HDD is full and thus the DVR is not able to record. Check HDD information from Disk management and if required, please enable the recycle function. d. Check the attributes of the HDD. It might be set to read only mode. e. The HDD could have gone bad. Please change another one. Q7. Mouse does not work. a.
VOOK DVR User Manual b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: DVR displays “please wait…”all the time a.HDD power cable and data cable may not be well connected. Please check the connections for HDD. b. It is also possible that the DVR was forced to stop because HDD has a bad sector and it may have caused the system to halt. Check with a good known HDD or try formatting the existing HDD.
DVR User Manual VOOK Q11: A hard disk is being identified as a new device however it was being used with another DVR of same model. Should it be formatted prior use? It is possible to migrate an HDD from one DVR to another provided that the DVRs are of the same model and that the HDD being migrated would be used as the sole disk in the new DVR. However in cases where the new DVR already contains a HDD, the migrated disk being installed would have to be formatted.
VOOK DVR User Manual VGA OS DirectX GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA 9.0 Q14: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7 system? This problem can be fixed in two ways: a. Enter Control PanelUser Account and Family Safety User Account Control (refer to Fig 14-1); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b.
DVR User Manual b. VOOK play button to play the After you install it, open this player and click ― Open Path‖ button to open your backup file. Next, click backup file. Double click the image and then right click to enable audio. If you save your backup files in AVI format, you can directly open your file by using the media player which supports this format.
VOOK DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Video Format Resolution Frame Rate Totally(FPS) NTSC CIF 30 PAL CIF 25 Video Quality Bit Rate (kbps) Highest Higher Medium Low Lower Lowest Highest Higher Medium Low Lower Lowest 2M 1.5M 1M 768K 512K 256k 2M 1.
DVR User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2. Compatible HDD list Brand Seagate Barracuda Seagate SV35.3 Seagate Pipeline HD.2 Maxtor Diamondmax HITACHI Deskstar WD WD1600JS Samsung HD161HJ Capacity 80G/160G/250G/320G /1.
DVR User Manual VDT2304SS-B 4-CH Specifications Compression format Video output Video input HDMI/VGA Resolution Standard H.264 Composite：1.0V p-p/75Ω BNC×1 , VGA×1，HDMI×1 Composite：1.
DVR User Manual VOOK VDT2308SS-B 8-CH Specifications Compression format Video output Video input HDMI/VGA Resolution Standard H.264 Composite：1.0V p-p/75Ω BNC×1 , VGA×1，HDMI×1 Composite：1.
DVR User Manual VOOK VDT2316SS-B 16-CH Specifications Compression format Video output Video input HDMI/VGA Resolution Record Resolution Standard H.264 Composite：1.0V p-p/75Ω BNC×1, VGA×1，HDMI×1 Composite：1.
VOOK A1
