User manual

Digital Video Recorder User Manual

Advance settings are as follows:

Step 1: Enter into MenuÆSetupÆ P. T. Z ÆAdvanced tab. Refer to Fig 4-38:

Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-39:

Fig 4-38 P.T.Z Configuration-Advanced Fig 4-39 Advanced-Preset Setting

Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-40:

Fig 4-40 Preset Setting-Setting

z User can control the dome by rotating up, down, left, right and adjust the rotating speed zoom, focus and iris of the dome;

z Select the serial number of the preset point. Click button to enable the PTZ wiper and click button to enable the PTZ

light.

Note: Only when the PTZ supports wiper and light, can these two functional buttons take effect. At the same time these two buttons are

only available when PELCOP or PELCOD is selected.

z Click Save button to save the settings, click icon to hide the tool bar, right-key can remerge it; click icon to exit the current

interface.