User manual

Digital Video Recorder User Manual
35
Fig 4-30 Network Configuration-Sub Stream
Note: Encode and Max Bitrate function are only available in 16/24-CH series DVR.
4.6.3 Email
Step 1: Enter into MenuÆSetupÆNetworkÆEmail tab. Refer to Fig 4-31:
SMTP Server/Port: The name and port number of SMTP server. After selecting “This
server requires a secure connection (SSL)”, user can setup mail servers (such as Gmail)
according to actual needs.
Send address/password: Sender’s email address/password
Receive address: Receiver’s email address. Here user can add at least three mail
addresses.
Click TEST button to test the validity of the mailbox.
Attaching image: If selected, the system will attach images when sending the emails.
Fig 4-31 Network Configuration-Email
4.6.4 Server
This function is mainly used for connecting ECMS.
Parameter Meaning
FPS
Range from: 1-6 (PAL)
Resolution
Support CIF
Quality
The quality of the clients’ image. The higher the value
is, the clearer the record image. Six options: lowest,
lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit
rate
Range from: 64 Kbps、128 Kbps、256 Kbps、512
Kbps、768 Kbps、1Mbps、2 Mbps