User manual

Digital Video Recorder User Manual
25
4.3.3 Time
Step1: Enter into MenuÆSetupÆRecordÆ Time tab. Refer to Fig 4-13:
Pre-alarm record time: The record time prior to actual triggering of an
alarm i.e. record time before motion detection or a sensor alarm was
triggered.
Post-alarm record: Set the post recording time after the alarm is
finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire time: The time till which the records would be retained. If the set
date is overdue, the recorded files will be deleted automatically.
Step2: Select “All” to setup all channels with the same parameters.
Step3: Click “apply” to save the setting; click “exit” to exit current
interface.
Fig 4-13 Record Configuration-Time
4.3.4 Stamp
Stamp：This provides an option to enable or disable the Camera Name and the
Time stamp on the video. The user can also choose a position for the stamp on the
screen.
Step1: Enter into MenuÆSetupÆRecordÆ Stamp tab. Refer to Fig 4-14:
Step2: Checkmark camera name, time stamp; click Setting button. User can use
cursor to drag the camera name and time stamp in random positions, referring to
below Figures:
Step3: Select “All” to setup all channels with the same parameters.
Fig 4-14 Record Configuration-Stamp