User manual

Digital Video Recorder User Manual

Step3: Select All to setup the same settings for all channels.

4.3.2 Record Stream

Step1: Enter into MenuÆSetupÆRecord ÆRecord Bitrate tab. Refer to Fig 4-12:

Step2: Setup rate, resolution, quality, encode and max bit stream

Step3: Select “All” to set the same settings for all channels.

Step4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

Fig 4-12 Record Configuration-Record Bit rate

Notice: Encode and Max Bitrate function are available only in 16/24-CH series DVR; 24-CH series DVR supports only CIF.

Parameter Meaning

Rate

Range from: 1-30（NTSC）1-25(PAL)

Resolution

Support CIF, HD1 and D1

Quality

The higher the value is, the clearer the recorded image is.

Six options: lowest, lower, low, medium, higher and

highest.

Encode

VBR and CBR

Max bit

stream

Range from: 256 Kbps, 384Kbps,512 Kbps, 768 Kbps,

1Mbps, 1.5MBps, 2 Mbps