User manual

Digital Video Recorder User Manual
22
4.2.3 Spot
Step1: Enter into MenuÆSetupÆLiveÆSpot tab. Refer to Fig 4-9:
Step2: Select split mode: 1×1 and map the channel
Step3: Set the dwell time.
Step4: Select the split mode and then setup current picture
group. Click
button to setup the previous channel groups
of dwell picture. Click
button to set the latter channel
groups of dwell picture.
Step5: Click “apply” button to save the setting; click “exit”
button to exit current interface
Fig 4-9 Live Configuration-Spot
4.2.4 Mask
User can setup private mask area on the live image picture,
max threes areas.
Setup mask area: Click Setting button, enter into live image to
press left mouse and drag mouse to set mask area. Please refer
to the left picture. Right click to exit. Click Apply button to
save settings.
Delete mask area: Select a certain mask area and double click
to delete that mask area. Then click Apply button to save the
setting.
Each channel is allowed to set 3 mask areas （applicable for
4/8/16-ch DVR） or 1 mask area (applicable for 24-ch DVR).
Fig 4-10 Live Configuration-Mask