User manual

Digital Video Recorder User Manual
19
Max network uses: To set the max number of concurrent user logins in the DVR.
VGA resolution: The resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS.
Note: Switching between VGA and CVBS will change the menu output mode. Please connect to relevant monitor.
Language: setup the menu language.
Note: After changing the language and video output, the device needs to login again.
Logout After (Minutes): A user can setup the screen interval time (30s, 60s, 180s, 300s). If
there is no any operation within the setting period, the device will auto logout and return to
login interface.
No Image When Logout: If this item is selected, there will be no image showing when
logout.
4.1.2 Date & Time
Step1: Enter into MenuÆSetupÆBasicÆDate & Time tab. Refer to Fig 4-4.
Step2: Set the date format, time format, time zone in this tab; checkmark “sync time with
NTP server” to refresh NTP server date; user can also adjust system date manually
Step3: Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
Fig 4-4 Basic Configuration-Date & Time
4.1.3 DST
Step1: Enter into MenuÆSetupÆBasic ÆDST tab (please refer to Fig 4-5).
Step2: In this tab, enable daylight saving time, time offset, mode, start & end month/week/date, etc.
Step3: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.