DVR USER MANUAL VDT2304HE VDT2308SE VDT2316SE VDT2324SE For H.
Digital Video Recorder User Manual CAUTION z Please read this user manual carefully to ensure that you can use the device correctly and safely z We do not warrant all the content is correct. The contents of this manual are subject to change without notice z This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction ...................................................................................................................................................................... 1 1.1 DVR Introduction ............................................................................................................................................................................................... 1 1.2 Main Features.........................................
Digital Video Recorder User Manual 4.2.2 Main Monitor ........................................................................................................................................................................................ 21 4.2.3 Spot....................................................................................................................................................................................................... 22 4.2.4 Mask ..............................................
Digital Video Recorder User Manual 4.7 User management Configuration......................................................................................................................................................................... 39 4.8 P.T.Z Configuration ........................................................................................................................................................................................... 41 4.9 Advanced ...........................................
Digital Video Recorder User Manual 7.1.1 On LAN................................................................................................................................................................................................ 53 7.1.2 On WAN............................................................................................................................................................................................... 53 7.2 Remote Surveillance through Apple PC......................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual • Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK • • • • • • • • Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 4 audio channels available Two record search mode: time search and event search Support 4/8/16 screen playback simultaneously Support deleting and locking the recorded files one
Digital Video Recorder User Manual • • Support 1 administrator and 63 users. Support event log recording and checking, events unlimited NETWORK • • • • • • • • • • Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don’t power up until the physical installation is complete. 2.1 Install Hard Drive Notice: 1. 4/8/16-ch DVR supports one SATA hard drive. 24-ch DVR supports three SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C Compatible Devices 2”. 2.
Digital Video Recorder User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Item 1 Type Name Power indicator, when connection , the light is blue HDD When HDD is writing and reading , the light is blue Work state Net indicator Backup Play When playing video, the light is blue When recording, the light is blue MENU/+ RECORD/FOCUS Compound REW/SPEED button SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z.
Digital Video Recorder User Manual Item Type Name 6 USB USB port 7 POWER POWER Description To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Shot switch off 2.3 Rear Panel Instructions The rear Panel interface for 4-ch is shown as Fig 2.3: Fig 2.3 Rear Panel for 4-ch Item Name Description 1 Video out Connect to monitor 2 Spot out Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name Description 9 P/Z Connect to speed dome 10 K/B Connect to keyboard 11 ALARM OUT 1-ch relay output. Connect to external alarm 12 + 5V and GND +5 V and Grounding 13 ALARM IN Connect to external sensor1-4 14 Audio in 4 CH Audio input The rear Panel interface for 8-ch is shown as Fig 2.4: Fig 2.4 Rear Panel for 8-ch Item Name Description 1 Video out Connect to monitor 2 Spot out Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name Description 8 USB port 9 P/Z Connect USB mouse or connect external USB devices Connect to speed dome 10 K/B Connect to keyboard 11 ALARM OUT 1-ch relay output. Connect to external alarm 12 + 5V and GND +5 V and Grounding 13 ALARM IN Connect to external sensor1-4 14 Audio in 4 CH Audio input The rear Panel interface for 16-ch is shown as Fig 2.5: Fig 2.
Digital Video Recorder User Manual Item Name 7 ALARM OUT Description 1-ch relay output. Connect to external alarm. 8 + 5V and GND +5 V and Grounding 9 ALARM IN Connect to external sensor1-16 10 USB port Connect USB mouse or connect external USB devices 11 NET Network port 12 Spot out Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name Description 6 Video in Video input channels from 1-24 7 Audio in 4 CH Audio input 8 P/Z Connect to speed dome 9 ALARM OUT 1-ch relay output. Connect to external alarm. 10 K/B Connect to keyboard 11 ALARM IN Connect to external sensor1-16 12 DC12V Power input. 13 Audio out Audio output, connect to the sound box 2.
Digital Video Recorder User Manual Fig 2.7 Remote Controller Item Name 1 Power Button Switch off - to stop DVR. Use it before turning off the power. 2 INFOR Button Get information about the DVR like firmware version, HDD information. 3 REC Button 4 Digital Button 5 Multi Screen Button 6 SEARCH Button Function To record manually. Input number or choose camera. To choose multi screen display mode. To enter search mode. 7 MENU Button To enter menu.
Digital Video Recorder User Manual Item Name 11 Playback Control Button 12 AUDIO Button 13 Auto Dwell Button 14 BACKUP Button 15 PTZ Control Button Function To control playback, Fast forward/rewind/stop/single frame play. To enable audio output in live mode. To enter auto dwell mode. To enter backup mode. To control PTZ camera, Move camera/ZOOM/FOCUS/IRIS/SPEED control. Operation processes with remote controller to control multi-DVR The default device ID of the DVR is 0.
Digital Video Recorder User Manual Click right button to reveal the control menu at the bottom of the screen. Click right to hide the control bar. In setup: Click to enter a particular option. Right click to cancel the option or to return to the previous menu. In order to input a value in a particular screen, move cursor to the input box and click. An input window will appear as Fig2.8. It supports digits, alphabets and symbols as inputs. Click ‘Shift’ can switch between uppercase and lowercase modes.
Digital Video Recorder User Manual Click left button to choose the buttons to control the PTZ. Click right button to return to live. Notice: Mouse is the default tool in all the operation below unless Exceptional indication 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR. 3.1.1 Startup Step1: Connect with the source power.
Digital Video Recorder User Manual Notice: This serial device can only display menu on VGA monitor or BNC monitor at one time. If there is live image display without menu display, please check up whether other device has menu display firstly, or long press ESC key to wait for login dialog box to appear. Long press ESC key can switch the output between BNC and VGA. 3.1.2 Shutdown You can shut down the device by using IR remote controller and mouse.
Digital Video Recorder User Manual 3.3 Live Preview Symbol Green Meaning Manual record Yellow Motion detection record Red Sensor Alarm record Blue Schedule record Fig 3-2 Live Preview 3.4 Live Playback Click Play button to playback the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen.
Digital Video Recorder User Manual Fig 3-3 Live Playback 4 Main Menu Setup Guide Right click or press ESC button on the front panel to display the control bar on the bottom of the screen.
Digital Video Recorder User Manual Fig 4-1 main menu toolbar PIP: Choose a single channel and then right click to show the menu bar . Then a PIP button will display. Now clicking this button and choosing another single channel can realize the effect of picture in picture. Click the icon beside the screen mode to display a channel selection box. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface.
Digital Video Recorder User Manual Fig 4-2 Main Menu 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuÆSetupÆBasicÆSystem tab ( please refer to Fig 4-3). Step2: In this tab user can setup the device name, device ID, video format, max network users, VGA resolution and language.
Digital Video Recorder User Manual Max network uses: To set the max number of concurrent user logins in the DVR. VGA resolution: The resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS. Note: Switching between VGA and CVBS will change the menu output mode. Please connect to relevant monitor. Language: setup the menu language. Note: After changing the language and video output, the device needs to login again.
Digital Video Recorder User Manual Fig 4-5 Basic Configuration-DST 4.2 Live Configuration Live configuration includes four submenus: live, main monitor, spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: Enter into MenuÆSetupÆLiveÆLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name.
Digital Video Recorder User Manual Fig 4-6 Live ConfigurationÆLive Fig 4-7 Live-Color Adjustment 4.2.2 Main Monitor Step1: Enter into MenuÆSetupÆLiveÆMain Monitor tab. Refer to Fig 4-8: Step2: Select split mode: 1×1、2×2、2×3、3×3、4×4 and map the channel Step3: Set the dwell time. Step4: Select the split mode and then setup current picture group. Click to setup the previous channel groups of dwell picture. button Click button to set the latter channel groups of dwell picture.
Digital Video Recorder User Manual 4.2.3 Spot Step1: Enter into MenuÆSetupÆLiveÆSpot tab. Refer to Fig 4-9: Step2: Select split mode: 1×1 and map the channel Step3: Set the dwell time. Step4: Select the split mode and then setup current picture group. Click button to setup the previous channel groups button to set the latter channel of dwell picture. Click groups of dwell picture.
Digital Video Recorder User Manual Setup Mask Area Live Image Mask Area 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: Enter into MenuÆSetupÆRecordÆEnable tab. Refer to Fig 4-11: Parameter Record Audio Fig 4-11 Record Configuration-Enable Step2: Checkmark record and audio.
Digital Video Recorder User Manual Step3: Select All to setup the same settings for all channels. 4.3.2 Record Stream Step1: Enter into MenuÆSetupÆRecord ÆRecord Bitrate tab. Refer to Fig 4-12: Step2: Setup rate, resolution, quality, encode and max bit stream Step3: Select “All” to set the same settings for all channels. Step4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual 4.3.3 Time Step1: Enter into MenuÆSetupÆRecordÆ Time tab. Refer to Fig 4-13: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e. record time before motion detection or a sensor alarm was triggered. Post-alarm record: Set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s. Expire time: The time till which the records would be retained.
Digital Video Recorder User Manual Before Drag After Drag 4.3.5 Recycle Record This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records (FIFO, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows: Step1: Enter into MenuÆSetupÆRecordÆRecycle Record tab. Step2: Checkmark the ‘recycle record’ box to activate the auto recycling.
Digital Video Recorder User Manual Step1: Enter into MenuÆSetupÆSchedule tab. Refer to Fig 4-15. Step2: Select channel and double-click to pop up a window as Fig 4-16. Now you can edit week schedule: Click “ ” button to add a certain day schedule; click “ ” button to delete the selected schedule; Copy: Copy the specified schedule to other dates. If you want to copy the schedule settings of a channel to other or all channels, you just need to select channel and click “Copy” button.
Digital Video Recorder User Manual 4.4.3 Sensor This tab allows to setup schedule for sensor based recording. Step1: Enter into MenuÆSetupÆScheduleÆSensor tab. Refer to Fig 4-18: Step2: The setup steps for schedule for sensor based recording are similar to normal schedule setup (Refer to 4.4.1 Schedule for details). Note: The default schedule of sensor based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables sensor based recording for 24x7.
Digital Video Recorder User Manual Fig 4-19 Alarm Configuration-Sensor-Basic Select hold time and then click Trigger button. A dialog box will pop-up as Fig 4-21: Fig 4-20 Alarm Configuration-Sensor-Alarm Handling Fig 4-21 Alarm Handling-Trigger Step 6: Enter into alarm tab to select the options to handle alarm. Buzzer: If selected, the local inbuilt buzzer would be activated on an alarm. Full screen alarm: If selected, there will pop up the chosen channel on the monitor on an alarm trigger.
Digital Video Recorder User Manual Email: If you select this option, the DVR will send an email alert to the preconfigured email address in case of a sensor based alarm from the particular input. Snap: If selected, the system will snap images of the checked channels on an alarm and save them in the HDD automatically. Step 7: Enter into To Record tab. Select recoding channels. It would be recorded in case of an alarm. Click OK button to save the setting. Step 8: Enter into To PTZ tab.
Digital Video Recorder User Manual Step3: The setup steps of motion trigger are similar to ‘Alarm Handling’. You can refer to Chapter 4.5.1 Sensor ÆAlarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 4-24: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8). The higher the value is the more sensitive it is to motion.
Digital Video Recorder User Manual more details. Step3: Select “all” to setup all channels with the same parameters. Step4: Click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-26 Video Loss 4.5.4 Other Alarm This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event, Disk Attenuation or Disk Lost. Step1: Enter into MenuÆSetupÆAlarmÆOther Alarm tab. Refer to Fig 4-27: Step 2: Use the dropdown menu and select the event or the alarm.
Digital Video Recorder User Manual Fig4-27 Other Alarm 4.5.5 Alarm Out Alarm out includes three sub menus: alarm out, schedule and buzzer To setup alarm out: Step 1: Enter into MenuÆSetupÆAlarm out tab. Refer to Fig 4-28. Input relay name and hold time. Step 2: Select the Schedule tab. This will bring up the schedule setup tab. The setup steps for schedule for alarm out are similar to normal schedule setup; you can refer to 4.4.1 Schedule for details. This step is very important for alarm out.
Digital Video Recorder User Manual 4.6 Network Configuration Network configuration includes five submenus: network, sub stream, Email, server and other settings. 4.6.1 Network Step 1: Enter into MenuÆSetupÆNetwork tab. Refer to Fig 4-29: Step 2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address: http://192.168.0.
Digital Video Recorder User Manual Parameter Meaning FPS Range from: 1-6 (PAL) Resolution Support CIF Quality The quality of the clients’ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Encode Max bit rate Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps Fig 4-30 Network Configuration-Sub Stream Note: Encode and Max Bitrate function are only available in 16/24-CH series DVR. 4.6.
Digital Video Recorder User Manual Step 1: In the server tab, select “enable” as shown in the Fig 4-32. Step 2: Check the IP address and port of the transfer media server in the ECMS. The default server port for auto report is 2009. If it is modified, please enter into the transfer media interface to check. Step 3: Enable the auto report in the ECMS when adding a new device. Then input the remaining information of the device in the ECMS. After that, the system will auto allot a Device ID.
Digital Video Recorder User Manual Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro”Æ”Start the trial” to register. Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account.
Digital Video Recorder User Manual Now, according to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.tv”, username is “bcd” and password is “123456” Connect DVR via network: Step 1: Enter into Main menuÆNetworkÆother settings, checkmark DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password. Step 2: Login IE browser and input registered domain name “http://www.abc.dyndns.tv” to connect DVR.
Digital Video Recorder User Manual Definitions and descriptions of network configuration: DDNS server DDNS server Website provided by dynamic domain name supplier. The optional: www.meibu.com ， www.dyndns.com, www.no-ip.com and mintdns type. User name User name for log in the website of domain name supplier Password Password for log in the website of domain name supplier Host domain Update interval The domain name user registered at the supplier’s website.
Digital Video Recorder User Manual Fig 4-34 User Management Configuration Fig 4-35 Add-General Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to Fig 4-36. Fig 4-36 Add User-Authority If you want to delete the user, please select the user you want to delete in the user list box and then click “Delete” button.
Digital Video Recorder User Manual 4.8 P.T.Z Configuration P.T.Z configuration includes two submenus: serial port and advanced settings. Serial port settings are as follows: Step 1: Enter into MenuÆSetup Æ P.T.Z ÆSerial port tab. Refer to Fig 4-37: Step 2: Select “enable” and setup the value of address, baud rate and protocol according to the settings of the speed dome. Step 3: Configure all channels with the same parameters by selecting the “All” box and then doing the relevant setup. Fig 4-37 P.T.
Digital Video Recorder User Manual Advance settings are as follows: Step 1: Enter into MenuÆSetupÆ P.T.Z ÆAdvanced tab. Refer to Fig 4-38: Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-39: Fig 4-38 P.T.
Digital Video Recorder User Manual In the preset tab, click OK button to save the setting; click Exit button to exit current interface.
Digital Video Recorder User Manual z User can control the dome by rotating up, down, right, left and can adjust the rotating speed and zoom, focus and iris of the dome; click Start Record button and move the PTZ in the required manner to record by the DVR. Click this button again can stop recording. Click Start track button to play recorded track. Click this button again can stop the playback. z Click icon to hide the tool bar and right click to view the toolbar again.
Digital Video Recorder User Manual 5 Search, Playback and Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuÆSearch ÆTime Search tab. Refer to Fig 5-1: Fig 5-1 Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.
Digital Video Recorder User Manual Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Playback Buttons Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. Click button to select channels to show live images in the playback interface. Only four channels at most can be selected to display live images.
Digital Video Recorder User Manual Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording. Step 4: Press “Search” button to display the searched event information in the event list box. Step 5: Double click the event item to play the record. 5.
Digital Video Recorder User Manual Fig 5-3 Search Configuration-File Management Step 2: Select date and channels. The date with highlighted borderline indicates presence of data. Step 3: Press “Search” button to display the searched files in the file list box. Lock: Select a file and click Lock button to lock this file. Once locked, the file cannot be deleted. Unlock: Select a locked file and click Lock button to unlock this file Delete: Select an unlocked file and click Delete button to delete this file.
Digital Video Recorder User Manual images on the HDD. Note: In order to take images on alarm, the snapshot feature should be activated in “Alarm Handling” for different kind of alarms. Please refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by USB Flash. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: Enter into MenuÆBackup tab.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check System Information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this tab, you can search for events like motion, sensor and video loss. The utility provides an interface to have a date based and a channel based search.
Digital Video Recorder User Manual Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. . 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual recording or schedule recording. 6.2 Manual Alarm In this tab, user can check the relevant parameters of manual alarm. 6.3 Disk Management 1.
Digital Video Recorder User Manual 6.4 Upgrade The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new software version. Upgrade Steps: Step 1: Copy the upgrade software which gets from vendor into the USB storage device Step 2: Connect the USB flash drive to the USB port. Step 3: Enter MenuÆUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main MenuÆSetupÆNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
Digital Video Recorder User Manual Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to FAQ Q8. 2. Connect the DVR to internet directly.
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select ApplicationsÆRight click “Safari. App”ÆSelect “Get Info”.
Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences”Æ”Internet &Wireless”Æclick “Network” Step 2: Enter into Network tab and then click “Ethernet Connected” to check the internet connection of Apple PC.
Digital Video Recorder User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main MenuÆSetupÆNetwork tab to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.
Digital Video Recorder User Manual the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 7.2.
Digital Video Recorder User Manual 7.3 The Remote Live Preview Fig 7-2 Remote Live Preview Symbol and function Definitions: Note: Click ① Channel indicator ② Screen display mode ③ Volume ④ Snapping picture ⑤ Start manual record ⑥ Start IE record ⑦ Bidirectional talk ⑧ Playback ⑨ Color ⑩ PTZ control ⑪ Master/sub stream status button to record manual and the record file will be saved in user’s PC.
Digital Video Recorder User Manual Screen Display Mode: icon beside the screen display mode, channel select dialog will appear as below: Clicking the Take 16-channel DVR for example: user can checkmark channels form 1-ch to 16-ch at random to display the live pictures, 8 channels can be selected at most. Then click OK button to confirm the setting.
Digital Video Recorder User Manual and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. the dome rotate down. means the dome means the dome means the dome rotate left. rotate up left. rotate left down. means the dome rotate right. means the dome rotate up right means the dome means rotate right down. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button.
Digital Video Recorder User Manual Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS（NTSC）for every channel, but it needs higher network bandwidth simultaneously; second stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth. Therefore, users can select the stream according to their bandwidth. All to master/sub stream: Set all channel to master stream or sub stream.
Digital Video Recorder User Manual Fig 7-5 Play Record File This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchÆtime search.
Digital Video Recorder User Manual Fig 7-6 Time Search Step2: The highlight date in the area indicates recorded data. Select the date in the area and record channels in area Step3: Click “Search” button. The record data will be displayed in the data information list box; Step 4: Set the Start time and display mode in the area as required Step 5: Click “play” button to playback Step 6: Click the relevant buttons in the interface for operation, like FF, pause, change channel mode, research, etc.
Digital Video Recorder User Manual Fig 7-7 Playback By Time Search By Event Search: Step1: Enter into SearchÆevent search.
Digital Video Recorder User Manual Fig 7-8 Event Search Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback File Management Step1: Enter into SearchÆFile Management.
Digital Video Recorder User Manual Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files.
Digital Video Recorder User Manual 7.4.2 Remote Backup Click Backup button to enter into backup interface. Please refer to Fig 7-10: Fig 7-10 Remote Backup Step1: Select channels, set the start and end time and then click “search’ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the save path. Then click “backup” button to start backup. The backup files will be saved on user’s PC.
Digital Video Recorder User Manual 7.5 Remote System Configuration You can do remote setup of the device which includes functions like basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. You should select an option from the menu list on the left and then setup the relative parameters. Only one user can do configuration setup at a given point of time.
Digital Video Recorder User Manual also format the HDD remotely. 7.7 Remote Management The Info tab provides a web based interface to access the general information pertaining to the DVR’s settings. It includes five submenus: System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 6 System information for more details.
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for five OS. 8.
Digital Video Recorder User Manual Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if successful access. Refer to the below picture on the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer to the below picture on the right: Notice: User name and password here are the same with that used on the DVR.
Digital Video Recorder User Manual Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer to the picture on the left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer to the picture on the right: Step4：A security windows will pop up after downloading and ask whether to install the package. Click YES to install.
Digital Video Recorder User Manual Step8：Input the server’s address, ID and password respectively. Then save. Notice: There may be different access points in different countries or from service providers. Step9：Enter Live View. It will connect the server and display pictures. Refer to the picture on the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
Digital Video Recorder User Manual Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”. Now, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”. Then the software will be installed automatically.
Digital Video Recorder User Manual Note: If it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC.
Digital Video Recorder User Manual Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “apply” button Operation Instruction for Superlive-Pro 77
Digital Video Recorder User Manual 1. Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Cruise 3. To enter into the next interface To return to the previous interface Preset select the preset point Set the cruise line Speed Rotate speed of the PTZ Image View After the image is snapped, you can click icon to enter into the image view interface.
Digital Video Recorder User Manual 4. 5. Playback Click icon to enter into the playback interface. Then click ‘Search’ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click ‘Close’ button to return to the previous interface. You can also search file to playback through time search, event search and remote file search. Please click the related button.
Digital Video Recorder User Manual 6. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click edit the server information and click icon to icon to delete this server information. 7. Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter four in respect of setting steps for more details.
Digital Video Recorder User Manual Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc. In the online users interface, you can see the information of the current online users. 8.
Digital Video Recorder User Manual Step 1: run Google Market program Step 3: press “Install” button Step 2: search”Supercam” Step 4: click “OK” button Step 5: user can view the download and install process in notifications; 83 Finished downloading, the software will install automatically.
Digital Video Recorder User Manual Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual Stop playing Single channel display Screen mode Four channels display Snap PTZ Talk Record Live audio Hide Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record playback 85
Digital Video Recorder User Manual Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click ‘Return’ button to return to the previous interface.
Digital Video Recorder User Manual If Audio alarm is enabled, when Video Loss/Sensor/Motion happen ， sound alarm will be Alarm setting triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen ， shake alarm will be triggered. Storage setting Display setting Information view 87 User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. User can setup display order or display mode.
Digital Video Recorder User Manual 8.5 By Phones with BlackBerry OS z Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically. If the software fails to download, please check in accordance with the following steps: 1.
Digital Video Recorder User Manual 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure on the left. (2) Enter into Menu->Option->Cache Operations, clear up browser cache. Refer below picture on the right: When user used the Supercam software in mobile phone with touch screen, there will be compatible problem.
Digital Video Recorder User Manual 2. Main interface Playback playback record file Image image view Log log record Server List device list Information Logoff Live 3.
Digital Video Recorder User Manual Note: User can click Return button on the Blackberry phone to return the previous interface. Mark 1 Current viewing channel Mark 2 Snap Background Full screen alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Preset 4.
Digital Video Recorder User Manual 5. Software configuration 6.
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
Digital Video Recorder User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller. Q11: Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR? And why must we format it again? When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without format.
Digital Video Recorder User Manual a. Enter Control PanelÆUser Account and Family Safety Æ User Account Control(refer to below picture); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser. Q14. How to play the backup file? a. Insert your USB device where the backup files are saved in the USB port of PC.
Digital Video Recorder User Manual enable audio. If you save your backup files in AVI format, you can directly open your file by using the media player which supports this format.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
Digital Video Recorder User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity SSK 512MB, 1G, 2GB Netac 4GB Kingston 2GB Aigo 2GB Smatter vider 1GB SanDisk 4GB 2. Compatible HDD list Brand Seagate Barracuda Capacity LP ST3200542AS 2TB Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 1.5T ST31000340SV 1T Seagate Pipeline HD.2 500G Seagate Barracuda 7200.10 320G Seagate Barracuda 7200.10 ST3250310AS 250G Seagate Barracuda 7200.
Digital Video Recorder User Manual Appendix D VDT2304HE Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite：1.
Digital Video Recorder User Manual Appendix E VDT2308SE Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite：1.
Digital Video Recorder User Manual Appendix F VDT2316SE Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video input Composite：1.
Digital Video Recorder User Manual Appendix G VDT2324SE Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video input Composite：1.
A8
