User manual

Digital Video Recorder User Manual
VOOK premium DVR 35
Fig4-25 alarm configuration-schedule Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
Step1: enter into system configurationÆother alarm; refer to Fig 4-27:
Disk full: user can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will alarm
according to the setup.
IP conflict: if there is an IP address conflict within the same network, the device will alarm after user selects buzzer and the
channel to alarm out.
Disconnect: if the disconnect happens, the device will the device will alarm after the user selects buzzer and the channel to
alarm out.
Disk Warning: if the disk reduces, the system will send email to the designated mailbox or alarm to notify the reducing
information after the user has selected the corresponding function.
Step2: the setup steps of Buzzer, Email, To Alarm Out
are familiar with alarm handling. User can refer to
Chapter 4.5.1 Sensor Æalarm handling for more details.
Step 3: select a hard disk in the pull down list box. When
the disk capacity is lower than that value, there will
appear some text information on the lower right of the live
image.
Step 4: click “default” button to resort default setting; click
“apply” button to save the setting; click “exit” button to exit
current interface.