VOOK DVR USER MANUAL VDT2304SE VDT2308SE VDT2316SE For H.
Digital Video Recorder User Manual CAUTION z Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice z This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction.........................................................................................................................................................................1 1.1 DVR Introduction......................................................................................................................................................................................................1 1.2 Main Features ..................................
Digital Video Recorder User Manual 4.1.2 Time & date..................................................................................................................................................................................................19 4.1.3 DST..............................................................................................................................................................................................................20 4.2 Live configuration.......................
Digital Video Recorder User Manual 4.6.2 Sub stream ..................................................................................................................................................................................................37 4.6.3 Email............................................................................................................................................................................................................38 4.6.4 Other settings.........................
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC .................................................................................................................................................................57 7.2.1 On LAN ........................................................................................................................................................................................................58 7.2.2 On WAN............................................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual • Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK • Record modes: Manual, Schedule, Motion detection and Sensor alarm recording • Support recycle after HDD full • Resolution, frame rate and picture quality are adjustable • 128MB for every video file packaging • 4 audio channels available • Two record search mode: time search and event search • Support 4/8/16 screen playback simultaneously • Support deleting
Digital Video Recorder User Manual live view, manual record, playback, PTZ control and remote live view • Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited NETWORK • Support TCP/IP, DHCP, PPPoE, DDNS protocol • Support IE browser to do remote view • Support setup client connection amount • Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive 2.1.1 Install Hard Drive Notice: 1.This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C Compatible Devices 2”. 2.
Digital Video Recorder User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Type Item Name Description 1 Work state indicator Power HDD Net Backup Play REC MENU/+ BACKUP/- Compound button 2 RECORD/FOCUS REW/SPEED SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z.
Digital Video Recorder User Manual Item Type Digital button Name 0/10+ 4 Input button 5 IR receiver Direction button Multi-screen Enter button IR 6 USB USB port 7 POWER POWER Description Input number0, 10 and the above number together with other digital keys Change direction to select items Change screen display mode like1/4/9/16 channel Confirm selection For remote controller To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Shot sw
Digital Video Recorder User Manual Item Name Description 1 Video out 2 Spot out 3 4 5 6 7 8 9 10 11 12 13 14 Audio out Video in DC12V VGA port LAN USB port P/Z K/B ALARM OUT + 5V and GND ALARM IN Audio in Connect to monitor Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Fig 2.4 Rear Panel for 8-ch Item Name Description 1 Video out 2 Spot out 3 4 5 6 7 8 9 10 11 12 13 14 Audio out Video in DC12V VGA port LAN USB port P/Z K/B ALARM OUT + 5V and GND ALARM IN Audio in Connect to monitor Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Fig 2.5 Rear Panel for 16-ch Item Name Description 1 2 3 4 5 6 7 8 9 10 11 Audio out Audio in VGA port Video out P/Z K/B ALARM OUT + 5V and GND ALARM IN USB port NET 12 Spot out 13 14 Video in DC12V Audio output, connect to the sound box 4 CH Audio input VGA output, connect to monitor Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output. Connect to external alarm.
Digital Video Recorder User Manual 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller Step2: Place batteries. Please take care the poles (+ and -) Step3: Replace the battery cover Notice: Frequently defect checking as following 1. Check batteries poles 2. Check the remaining charge in the batteries 3.
Digital Video Recorder User Manual Item Name 4 5 6 7 8 9 10 11 12 13 14 Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button Function Input digital or choose camera To choose multi screen display mode To enter search mode To enter menu To confirm the choice or setup Move cursor in setup or pan/title PTZ To increase or decrease the value in setup To control playbac
Digital Video Recorder User Manual 2.5 Control with Mouse 2.5.1 Connect Mouse It supports USB mouse through the ports on the rear panel. Notice: If mouse is not detected or doesn't work, check below steps: 1. Make sure the mouse plugs in the USB mouse port not the USB port 2. Change a mouse to try 2.5.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display.
Digital Video Recorder User Manual blinks. It supports mouse drag. I.e. Set motion detection area: click customized, hold left button and drag to set motion detection area. Set schedule: hold left button and drag to set schedule time In playback: Click left button to choose the options. Click right button to return to live mode. In backup: Click left button to choose the options. Click right button to return to previous picture. In PTZ control: Click left button to choose the buttons to control the PTZ.
Digital Video Recorder User Manual Notice: this serial device can only display menu on VGA monitor or BNC monitor at one time, if there is live image display without menu display, please check up whether other device has menu display firstly, or long press ESC key to wait for login dialog box to appear. Long press ESC key can switch the output between BNC and VGA. 3.1.2 Power off User can power off the device by using remote controller、keyboard and mouse.
Digital Video Recorder User Manual configuration for more details. 3.3 Live preview Symbol Green Yellow Red Blue Meaning Manual record Motion detection record Sensor Alarm record Schedule record Fig 3-2 live preview interface 3.3.1 Live playback Click Play screen. button to playback the record. Refer to Figure3-3.
Digital Video Recorder User Manual Fig 3-3 live playback 4 Main menu setup guide VOOK premium DVR 16
Digital Video Recorder User Manual Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 menu toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Dwell: Range of selecting to dwell is from single picture preview mode to 1/4/6/8 picture preview mode.
Digital Video Recorder User Manual Fig 4-2 main menu configuration menu 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.1 System Step1: enter into system configurationÆbasic configurationÆsystem; refer to Fig 4-3: Step2: in this interface user can setup the device name, device ID, video format, max online users, Video Output and language, Screensaver and so on. The definitions for every parameters display as below: Device name: the name of the device.
Digital Video Recorder User Manual VGA1280*1024 and CVBS. Note： When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor. Language: setup the menu language. Note: after changed the language and video output, the device needs to login again. Screensaver: user can setup the screensaver interval time (30s, 60s, 180s, 300s), if there is no any operation within the setting period, the device will auto logout and return to Login interface.
Digital Video Recorder User Manual Fig 4-4 basic configuration-time & date 4.1.3 DST Step1: enter into system configurationÆbasic configurationÆDST; refer to Fig 4-5: Fig 4-5 basic configuration-DST Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.
Digital Video Recorder User Manual Step1: enter into system configurationÆlive configurationÆlive; refer to Fig 4-6: Note: Click Camera Name to see a soft keyboard. User can self-define the camera name. Click Shift button to input Capital letters; click Shift button again to input Chinese characters.
Digital Video Recorder User Manual of dwell picture, click button to set the latter channel groups of dwell picture. Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-8 live configuration-host monitor 4.2.
Digital Video Recorder User Manual Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save the setting. Fig 4-10 live configuration-mask Setup mask area Live image mask area 4.
Digital Video Recorder User Manual 4.3.1 Enable Step1: enter into system configurationÆrecord configurationÆenable; refer to Fig 4-11: Parameter Record Audio Meaning Record switch of every channels Enable live record audio Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual Parameter Resolution fps Quality Meaning Support CIF Range from 1-30（NTSC）1-25(PAL) The higher the value is, the clearer the Recorded image is. Six options: lowest, lower, low, medium, higher and highest. Fig 4-12 record configuration-record bit rate 4.3.3 Time Step1: enter into system configurationÆrecord configurationÆ time; refer to Fig 4-13: Pre-alarm record time: the record time before event happen i.e.
Digital Video Recorder User Manual Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-13 record configuration-time 4.3.4 Stamp Stamp：User can overlap the channel name and time stamp on video.
Digital Video Recorder User Manual Fig 4-14 record configuration-stamp Step2: tick off camera name, time stamp; click Setting button, and then user can use cursor to drag the camera name and time stamp in random positions. Please refer to below Figures: Before drag after drag Step3: user can also setup all channels with same parameters. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
Digital Video Recorder User Manual Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when HDD is full; if disenabled, it will stop recording when HDD is full. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.6 Snap In this interface, User can set up Resolution, quality, snap interval, snap number. 4.
Digital Video Recorder User Manual Fig 4-16 schedule-week schedule Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting, click “Exit” button to exit current interface. ② User can apply the schedule setting of certain channel to other or all channels. Just only select channel and click “Copy” button. Step3: click “apply” button to save the setting. ① 4.4.
Digital Video Recorder User Manual 4.4.3 Sensor Step1: enter into system configurationÆschedule configurationÆalarm; refer to Fig 4-18: Fig 4-18 schedule configuration-sensor Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.
Digital Video Recorder User Manual Fig 4-19 alarm configuration-sensor-basic ② Alarm handling Step1: enter into system configurationÆalarm configurationÆsensorÆalarm handling; refer to Fig 4-20: Step2: select hold time and click Trigger button.
Digital Video Recorder User Manual Full screen alarm: when triggered alarm, there will pop up full screen alarm; Email: tick of this function. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected channel.
Digital Video Recorder User Manual Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5.2 Motion Motion includes two sub menus: motion and schedule. ① Motion Step1: enter into system configurationÆalarm configurationÆmotion; refer to Fig 4-23: Step2: enable motion alarm and set alarm hold time which means time interval between two adjacent detective motions.
Digital Video Recorder User Manual will be cleared; click icon, user can test whether the sensitivity value and motion area are suitable accordingly（refer to icon, to save the setting; click icon, exit current interface. following picture）; Click icon to clear all set detection area Note: when user drag mouse to set motion detection area, they have to click firstly, and then make the operation. Step6: user can also setup all channels with same parameters.
Digital Video Recorder User Manual Fig4-25 alarm configuration-schedule Fig 4-26 alarm configuration-video loss 4.5.4 Other alarm Step1: enter into system configurationÆother alarm; refer to Fig 4-27: Disk full: user can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will alarm according to the setup. IP conflict: if there is an IP address conflict within the same network, the device will alarm after user selects buzzer and the channel to alarm out.
Digital Video Recorder User Manual Fig4-27 other alarm 4.5.5 Alarm out Alarm out includes three sub menus: alarm out, schedule and buzzer ① Alarm out Step1: enter into system configurationÆalarm out; refer to Fig 4-28: Step2: in this interface, set relay alarm out name, select hold time which means the interval time between the two adjacent alarms. Step3: user can setup all channels with same parameters. Tick off “all” to do relevant setup.
Digital Video Recorder User Manual ③ Buzzer Step1: enter into system configurationÆbuzzer; Step2: tick off Buzzer, set buzzer alarm hold time 4.6 Network configuration Network configuration includes four submenus: network, sub stream, Email and other settings. 4.6.1 Network Step1: enter into system configurationÆnetwork configurationÆnetwork; refer to Fig4-29: Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e.
Digital Video Recorder User Manual Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Parameter FPS Resolution Quality Meaning Range from: 1-25 Support CIF The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. Fig 4-30 network configuration-sub stream 4.6.
Digital Video Recorder User Manual Send address/password: sender’s email address/password Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: Tick off this item. The system will attach images when sending the emails. Fig 4-31 network configuration-email 4.6.
Digital Video Recorder User Manual Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server. After the successful apply, user can access the server from the IE client by inputting that domain name.
Digital Video Recorder User Manual operation: z Click “Tools”-- “Folder options” z Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． Domain name Registration （Take www.dyndns.com for example） Note: Users can self-define the hostname, username and password. Input www.dyndns.com in the IE address bar, user can access the domain name registration interface. Click” ”Æ”Create Free Hostname” to register. For example: Hostname is “abc.dyndns.tv.
Digital Video Recorder User Manual Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”， the domain name for DVR is “www. abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client.
Digital Video Recorder User Manual DDNS server User name Password Host domain Update interval Website provided by dynamic domain name supplier. The optional: www.dns2p.net ， www.meibu.com ， www.dyndns.comandwww.no-ip.com User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier’s website. The interval time of upgrading DVR IP address 4.
Digital Video Recorder User Manual ② Authority: Step1: enter into Add userÆauthority referring to Fig 4-35: Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box and then click Delete button to delete this user.
Digital Video Recorder User Manual Fig 4-36 P.T.Z configuration-serial port Definitions and descriptions of serial port: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
Digital Video Recorder User Manual ② Advance Step1: enter into system configurationÆ P.T.Z configurationÆadvance; refer to Fig 4-37: Step2: in the Advance interface, after clicking preset “Setting” button, a dialog box will pop-up as Fig 4-38: Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a. in the preset set interface, click Setting button to see a window as Fig 3-39: Fig 4-39 preset set-setting b.
Digital Video Recorder User Manual Click Save button to save the settings; click icon to hide the tool bar, right-key can remerge it; click interface. d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface. Step3: in the Advance interface, click cruise “Setting” button, a dialog box will pop-up as Fig 4-40: icon to exit the current Fig 4-40 cruise set a.
Digital Video Recorder User Manual preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point. Click Preview button to preview the cruise line and then click OK button to save the setting. Next, click Exit button to exit current interface. c.
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes four submenus: Time Search, Event Search, File Management and Snap. 5.1 Time search Step1: enter into Search configurationÆTime Search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date and press Search button.
Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button. Click this button to expand the whole interface. 5.
Digital Video Recorder User Manual Step2: After clicking Search button, the searched event information will displayed in the event list box. User can select date, channel. Tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback. 5.
Digital Video Recorder User Manual Step4: double click an unlocked item to playback. 5.4 Image In this interface, user can set start, end time and channels to search the captured images and save, lock or delete these images. There are at most 2000 images which can be saved in the SATA disk. If there are more images saved in the SATA disks than 2000 images, those additional images will supersede prior images.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to set date. 6.1.3 Log information In this interface, user can check relevant log information according to set date; 6.1.
Digital Video Recorder User Manual Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: select a hard disk and click Format button to star format. Note: all recorded files in the hard disk will be lost after formatted. 2.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main MenuÆSetupÆNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
Digital Video Recorder User Manual address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8. 2. Connect the DVR to internet directly. Step 1: Enter into the DVR’s Main MenuÆSetupÆNetwork interface to enable PPPoE and then input user name and password received from your ISP. Next, click ‘Apply’.
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select ApplicationsÆRight click “Safari. App”ÆSelect “Get Info”.
Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Preferences”Æ”Internet &Wireless”Æclick “Network” VOOK premium DVR icon. The following window will pop up.
Digital Video Recorder User Manual Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main MenuÆSetupÆNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Digital Video Recorder User Manual http://192.168.1.100:81(here 192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR). Click “ download Active X control as shown below: ”button, the browser will icon and then select the Active X control, the welcome interface will be shown. Click “Continue”Æ”Install” Step 5: Click button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control.
Digital Video Recorder User Manual 7.2.2 On WAN There are also two ways for DVR to connect to Internet. 1. Connect the DVR to internet through router or virtual server Step 1: The network setups are the same as step one to step four of point 1 on WAN of IE remote surveillance. Step 2: Enter WAN IP and http port in the Safari browser to install the Active control. The concrete steps are the same as step 5 and 6 of Chapter 7.2.1. 2. Connect the DVR to internet directly.
Digital Video Recorder User Manual 7.
Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off channels form 1-ch to 8-ch at random to display the live pictures, 6 channels can be selected at most. Then click OK button to confirm the setting.
Digital Video Recorder User Manual Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button.
Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS（NTSC）for every channel, but it needs higher network bandwidth simultaneously; Sub-stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth.
Digital Video Recorder User Manual 7.4 Remote playback & backup 7.4.1 Remote playback Click button to enter into record playback interface, refer to Fig 7-5: Select the record date and channels; double-click the file name in the record file list box, user can play that file and preview the picture.
Digital Video Recorder User Manual This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchÆtime search; refer to Fig 7-6: Fig 7-6 time search interface Step2: click “Search” button.
Digital Video Recorder User Manual research, etc.
Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box.
Digital Video Recorder User Manual Step1: Enter into SearchÆfile management; refer to Fig 7-9: Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list VOOK premium DVR 70
Digital Video Recorder User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search’ button to display the file information in the file list box. Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC.
Digital Video Recorder User Manual 7.5 Remote System Configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.
Digital Video Recorder User Manual settings.
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual Step3：Click “Yes” to start downloading and installing: Step4：PCam will be opened automatically after installed Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Step6：Camera 1 is the default channel after login.
Digital Video Recorder User Manual Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Symbian S40 Symbian UIQ Symbian S80 Symbian S60 Symbian S60 3rd Edition-Symbian OS v9.1 Symbian S60 3rd Edition with FP 1-Symbian OS v9.2 Symbian S60 3rd Edition with FP2-Symbian OS v9.3 Symbian S60 5th Edition-Symbian OS v9.4 Symbian S60 5.1 Edition-Symbian OS v9.
Digital Video Recorder User Manual Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program. It will enter a function interface. Live view: to do mobile live view Image view: to check the pictures snapped in live view System setting: Login setting and Alarm setting.
Digital Video Recorder User Manual 8.3 The operation method for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2.
Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” VOOK premium DVR 79
Digital Video Recorder User Manual Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2.
Digital Video Recorder User Manual Step 3: Enable “search” VOOK premium DVR function to search “SuperCam” Step 4: Click “free application” button 81
Digital Video Recorder User Manual Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button Operation Instruction for iphone 1.
Digital Video Recorder User Manual password. 2. Main Interface 【Playback】 【Log】 【Live】 【Information】 【Logoff】 3.
Digital Video Recorder User Manual Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set t
Digital Video Recorder User Manual 4. Image view interface 5.
Digital Video Recorder User Manual Click the record file to playback. 6.
Digital Video Recorder User Manual 7. Config interface Main parameters for mobile phone video configuration Record file clip size: Single video size.
Digital Video Recorder User Manual 8.
Digital Video Recorder User Manual Step 1: run Google Market program Step 2: search”SuperCam” Step 3: press “Install” button Step 4: click “OK” button Step 5: user can view the download and install process in notifications; finished download, the software will install automatically.
Digital Video Recorder User Manual Login Enter into server’s IP address (or domain name), user’s ID and password. button can quick input saved server address, user name and Click “Remember server” to save the setting; click password.
Digital Video Recorder User Manual （Fig 1） Mark 1 Current viewing channel （Fig 2） Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ VOOK premium DVR 91
Digital Video Recorder User Manual Stop rotates the PTZ Zoom Out/Focus Out/Iris Sub Group Zoom In/Focus In/Iris Add Preset Select the preset point Set the cruise line Image view Previous Next Zoom out Delete Zoom out Return to main menu Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） VOOK premium DVR （Fig 4） 92
Digital Video Recorder User Manual Click the record file (Fig 3) to playback (Fig 4) Server list Config interface VOOK premium DVR 93
Digital Video Recorder User Manual Alarm setting Storage setting Path Reserved disk space Video clip size Remove all recorder files before Information view VOOK premium DVR Tick off Sound Alarm， when Video Loss/Sensor/Motion happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SD Card/.
Digital Video Recorder User Manual 8.5 Installation and Operation methods for blackberry mobile phone Client 8.5.1 Installation instruction for Blackberry mobile phone client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.
Digital Video Recorder User Manual 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure.
Digital Video Recorder User Manual 2) Enter into Menu->Option->Cache Operations, clear up browser cache. Note：When user used the SuperCam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->SuperCam and click “Disable Compatibility” button. This problem will be solved.
Digital Video Recorder User Manual 8.5.2 Operation method for Black berry mobile phone client 1. Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual 【Playback】 【Log】 【Information】 3.
Digital Video Recorder User Manual Note: User can click Return button on the Blackberry phone to return the previous interface. Mark 1 Current viewing channel Mark 2 Channel status Preset 4.
Digital Video Recorder User Manual 5. Software configuration 6.
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual Q6. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c.
Digital Video Recorder User Manual b. Other plug-ins or anti-virus block ActiveX. Please uninstall or close them. Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual Q10: How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input by numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
Digital Video Recorder User Manual Q13: How to handle the situation when codec Control is blocked to install in the VISTA or Win7 system? If user gets this problem, may have two ways to fix it: a. Enter Control PanelÆUser Account and Family Safety Æ User Account Control(refer to below picture); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
Digital Video Recorder User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB Tab C.1 Compatible USB drive 2. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.
Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Video output Video input VGA Resolution Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Composite：1.
Digital Video Recorder User Manual Appendix E 8-CH Specifications Compression format Video output Video input VGA Resolution Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Composite：1.
Digital Video Recorder User Manual Appendix F 16-CH Specifications Compression format Video output Video input VGA Resolution Record Resolution Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2, VGAX1 Composite：1.
