User manual

VOOK DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
19
Set Click Start Tour the trajectory of said no corresponding, click the add Preset and delete Preset
point , Clear Tour the cruise lines.
Start Tour begin to track record, was registered date end Tour thus set up from the corresponding track
circuit.
Left Limit Began to limit scanning Settings, was registered date right Limit , thus set up corresponding limit
scanning.
Add Preset Add presets point to the cruise lines.
Delete Preset Cruise lines from deleting preset points.
Clear Tour Remove the cruise line designated.
Note : some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
Control PTZ Control
Tour Scan Point between cruise control.
Pattern Scan Track patrol control.
PTZ Reset Remove all Settings, original reset to the original state.
Limit Scan Yuntai boundary scan control around.
Auto Pan Remove the cruise line designated
Note : some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
VOOK DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
20
3.9 Alarm control
Set Alarm Selection need protection channel, click confirm corresponding channel after in protection status
Clear Alarm Remove protection condition, not alarm input to react
Alarm Output Open the corresponding alarm output
All Can choose all the channels
3.10 Display Adjust
(1) Video
Video Effect Optional: standard, downy, sharp, custom.
Default Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor