User Manual

8
EN
WWW.VONROC.COM
Model No. CD802AA
Charger input 220-240V, 50Hz 0.4A
Charger output 21V
2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg
Model No. CD803AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Recommended charger CD802AA
Weight 0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. On/Off switch
2. Carrying handle
3. Cover for battery
4. Battery
5. Battery unlock button
6. Locking clamp
7. Top section
8. Container
9. Blowing port
10. Vacuum port
11. Intake port
12. Hose
13. Foam filter
14. HEPA filter
15. Filter cage
16. Float
17. Dust collection bag
18. Triangular nozzle
19. Crevice nozzle
20. Car vacuum tool
21. Power tool adapter
22. Battery LED indicators button
23. Battery LED indicators
24. Charger
25. Charger LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B1, B2)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (4) into the base of the machi-
ne as shown in Fig. B1, B2.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine
(Fig. B1, B2)
1. Push the battery unlock button (5).
2. Pull the battery out of the machine like shown
in Fig. B1, B2.
Checking the battery charging status (Fig. C)
• To check the battery charge status, push the
button (22) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more char-
ge the battery has left.
• When the lights are not burning it means the
battery is empty and must be charged
immediately.
Charging the battery with the charger (Fig. C)
1. Take the battery (4) from the machine.
2. Turn the battery (4) to upside down position and
slide it onto the charger (24) as shown in Fig. C.
3. Push the battery until it is fully pushed into the
slot.