Pre-Delivery/Install Checklist

© VONN Lighting,2018
Legend
L = Live/Hot/Black
N = Neutral/White
= Ground/Green
ON
ON
Circuit Box
4. Turn Power ON
Turn electricity “ON” at main fuse box.
•
A
B
B
Plastic Housing
Plastic Housing
Ground
Installation Hole Size
Refill with pea gravel
or sand
Ø5.25”
Ø135mm
Ø6”
Ø155mm
•Remove fixture from plastic housing.
•Thread supply wires through plastic housing.
•Insert plastic housing into prepared concrete
ground.
1. Prepare Hole
Prepare concrete for plastic housing.
3. Supply Wires:
Ground Wires:
Connect White (Neutral Wire) from fixture to power White
(Neutral Wire).
Connect Green (Ground Wire) from fixture to supply Green
(Ground Wire).
Twist wires together clockwise and secure with wire
connector (A).
Connect Black (Line Wire) from fixture to power Black (Hot
Wire).
•
•
•
•
2. Remove Fixture
•Tuck wires in plastic housing. Insert fixture into plastic housing.
•Secure fixture by tightening screws with hex wrench (B).