Installation Guide

© VONN Lighting,2019
Legend
L = Live/Hot/Black
N = Neutral/White
= Ground/Green
•Remove fixture from plastic housing.
•Thread supply wires through plastic housing.
•Insert plastic housing into prepared concrete
ground.
1. Prepare Hole
Prepare concrete for plastic housing.
ON
ON
Circuit Box
4. Turn Power ON
Turn electricity “ON” at main fuse box.
3. Supply Wires:
Ground Wires:
Connect White (Neutral Wire) from fixture to power White
(Neutral Wire).
Connect Green (Ground Wire) from fixture to supply Green
(Ground Wire).
Twist wires together clockwise and secure with wire
connector (A).
Connect Black (Line Wire) from fixture to power Black (Hot
Wire).
•
•
•
•
•
2. Remove Fixture
A
Plastic Housing
Concrete
•
Plastic Housing
Installation Hole Size
Refill with pea gravel
or sand
6”
150mm
Ø1.50”
Ø35mm
•Tuck wires in plastic housing. Insert fixture into plastic housing.