User Guide

VONETS - Wireless Module/Finished Product

4. Input “Source wireless hotspot password”, click “Apply”;

⚫ IP layer transparent transmission (factory default), transparent transmission of IP layer data,

can meet most of WiFi bridge applications;

⚫ MAC layer transparent transmission, transparent transmission of all data above the MAC

layer (link layer) and MAC layer, including IP layer data. MAC transparent transmission can

solve some special applications for MAC layer encryption, such as GoPro camera, Cisco AP,

Hikvision monitoring system, etc;

⚫ The option “The configuration parameters of WiFi repeater security is synchronized with

source hotspot” is default ticked, it means the SSID of VONETS repeater is associated with

the SSID of the source hotspot, and the WiFi password is the same as the password of the

source hotspot;

⚫ Disable hotspot, if you select “Disable hotspot” on the right side of the SSID, the device

will not transmit the corresponding hotspot and can only be used as a bridge application;

⚫ Advanced Setting,include Hot spot authentication match mode, WiFi Signal Motion

Detection and SSA Signal strength alarm threshold,these options here can be kept

unchanged, for instructions on this option, go to www.vonets.com and download the “V

Series WiFi Bridge Advanced Features Instruction”;