User Guide

VONETS - Wireless Module/Finished Product
4
(After the WiFi parameters are configured, the WiFi will be disconnected, that is normal.)
2.2 Bridge+Repeater Application Configuration
The configuration steps of VONETS module/WiFi product for WiFi repeater and WiFi bridge are
basically the same, so this manual combines the configuration instructions of the two application
modes.
1. After computer is connected to VONETS module/WiFi product, open browser, input configured
page: http://vonets.cfg (or IP: 192.168.254.254), then press Enter;
2. Input User name and Password in login page (both are “admin”), click “Login” button to
enter configured page;
3. “Scan Hotspots”, choose the source hotspots, click “Next”;