User Guide

VONETS - Wireless Module/Finished Product
14
2. Choose the source hotspots, click “Next”;
3. Input “Source wireless hotspot password”, click “Apply”
⚫ The option “The configuration parameters of WiFi repeater security is synchronized with
source hotspot” is default ticked, it means the SSID of VONETS repeater is associated with
the SSID of the source hotspot, and the WiFi password is the same as the password of the
source hotspot;
⚫ Disable hotspot, if you select “Disable hotspot” on the right side of the SSID, the device
will not transmit the corresponding hotspot and can only be used as a bridge application;
⚫ Advanced Setting,include Hot spot authentication match mode, WiFi Signal Motion
Detection and SSA Signal strength alarm threshold,these options here can be kept
unchanged, for instructions on this option, go to www.vonets.com and download the “V
Series WiFi Bridge Advanced Features Instruction”;