User Guide

VONETS - Wireless Module/Finished Product
12
3.2.2 WAN Port connection method
By setting the WAN port of the router, you can change the network connection type according to
the actual needs of the individual, there are three types of WAN port connections commonly used
in the routing mode of the VONETS module/WiFi product: DHCP(Auto Config), PPPoE(ADSL) and
WiFi. DHCP and PPPoE are wired connections, and the WAN port needs to be connected to the
source network through a wired connection:
⚫ DHCP(Auto Config): WAN port connection type is selected as
“DHCP(Auto Config)”, VONETS
module/WiFi product will automatically obtain IP address from source network;
⚫ PPPoE(ADSL): WAN port connection type is selected as “PPPoE”, that is, ADSL virtual dialing
mode requires ISP (Internet Service Provider) to provide Internet account and password.
⚫ WiFi: WAN port connection type is selected as “WiFi”, VONETS module/WiFi product uses a
built-in WiFi network card (used to connect to the source hotspot) as a WAN port, and all
Ethernet ports as LAN ports, while providing WiFi hotspot functions.
3.2.3 WAN port wired connect network
——DHCP
The default WAN port connection mode of VONETS is DHCP. The WAN port can automatically
obtain an IP address after connecting with the source network.