User guide

Vonage V-Portal User Guide
1. Click on the Add Rule button in the Priority Rules List section. The Add Priority Rule
r. screen will appea
2. Enter a name for the rule in the Name field. Note that rule names are case sensitive; for
example “Rule-1” and “RULE-1” will refer to two different rules.
3. You can choose to define your rule using a source (LAN) IP address range or port ran
or dest
ge,
ination (WAN) IP address range or port range.
Enter the appropriate information in the following fields:
Range
utton.
Address Range or Source Port Range or Destination IP Address
.
you make a mistake and want to start over again, click the Clear button. And if you change
your mind and don’t want to enter a rule at all, click the Cancel button.
Once the rule(s) have been added they will appear in the Priority Rules List table. In the
example below, a single rule has been added and defined using Source Port Range.
 Source IP Address Range
or
 Source Port
or
 Destination IP Address Range
or
 Destination Port Range
4 . Click the Save b
NOTE: When defining a priority rule you can specify only one of the four given options. You can
specify Source IP
Range or Destination Port Range
If
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
Section 11 which explains limitations on Warranty, Remedy and Liability.
85