98/99 Series TM Exit Devices
Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and manufactures exit devices in accordance to ISO 9001 Quality Management System and meets or exceeds accepted U.S. domestic and International standards. All 98 and 99 Series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, 2001, Grade 1.
98/99E Series Exit Devices Von Duprin exit devices are available in two external surface styles, designated 98 and 99 Series. 98 Series features smooth mechanism case. 99 Series features grooved mechanism case. Latch Bolt Deadlocking latchbolt provides security and improved performance at standard device cost. The Quiet One® A fluid damper decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations. Furnished on all 98/99™ Series exit devices.
98/99E Exit Devices Table of Contents Exit Hardware Fire Exit Hardware Rim Devices 98/99 ................................................................... 8 Trim......................................................................... 9 98-F/99-F .......................................................... 10 Trim....................................................................... 11 Mortise Lock Devices 9875/9975........................................................... 12 Trim..................
How to Order None SD CD CX E QEL EL LX RX RX2 SS PL PN WS XP Standard Special Dogging R/VR - Panic Only Cylinder Dogging - Panic Only Chexit Electric Locking Mortise/Lever Quiet Electric Latch Retraction Electric Latch Retraction Latch Bolt Monitoring Request to Exit Double Request to Exit Signal Switch Pullman Latch Pneumatic Latch Retraction Surface Vertical Rod Exit Device Heavy Protection - Rim EL 99 27 -L -16 -F LBR 3' US3 RHR 98 Series 98-smooth 99 Series 99-grooved None 27 47 47WDC 48 49 4
Popular Applications & Handing Single Door Applications Single mortise lock device Double Door Applications Single rim device Door Handing Left Hand-Reverse Left Hand-Reverse Orientation Orientation Mortise lock and surface mounted or concealed vertical cable/rod device combination— same direction Two rim devices with mullion— same direction Two surface mounted vertical rod devices—same direction (do not use with overlapping astragal) Two Fire Exit Hardware vertical cables/rods with auxilary fire la
Lever Styles Decorative Levers E - APRIL AVAILABL M51 M52 Knurling available Knurling available 2014 M53 2014 E - APRIL AVAILABL M56 M57 •• E - APRIL AVAILABL M54 2014 M55 2014 E - APRIL AVAILABL M61 (Handed) M62 •• (Handed) M63 (Handed) M83 M84 M85 (Handed) 2014 E - APRIL AVAILABL M81 M82 Knurling available •• Available in Stainless Steel substrate ONLY.
98/99E Rim Exit Device The 299 Strike ships standard, optional strikes available 98 and 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (Special Dogging), -2 (Double Cylinder) or SS (Signal Switch).
Standard Trim EO DT Night Latch Key Retracts Latchbolt 98EO 99EO 98DT 99DT 98NL 99NL — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 Escutcheon Plate Size — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim Optional #425 Sex Bolt Quantity for Device Pull Center t
98-F/99-F Rim Fire Exit Device The 299F Strike ships standard, optional strikes available 98-F/99-F Rim Fire Exit Device 98-F and 99-F rim fire exit devices for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. See page 61 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1.
Standard Trim Standard Trim EO Product Description DT Exit only Night Latch Key Retracts Latchbolt 98EO-F 99EO-F — — 98NL-F 99NL-F — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 6 2 (if using trim) 2 2 2 2 2 2 2 Escutcheon Plate Size — L Product Description Trim Description Escutcheon
9875/9975 Mortise Lock Device 7500 Mortise Lock Hex key dogging comes standard on 9875/9975 Mortise Lock Devices 9875/9975 Mortise Lock Device 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4 ³|₄" (121mm). The 9875 device has a smooth mechanism case and the 9975 device has a grooved case.
Standard Trim EO DT Hospital Latch Key Locks & Unlocks 9875NL 9975NL 990NL-M 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 1Z|v" Mortise x996K-NL x996L-NL x696NL x697NL — 9875HL 9975HL HL6M 2⁹|₁₆" x 5¹|₂" x 2⁵|₈" (65x140x67mm) — 2⁵|₈" (67mm) — 1Z|v" Mortise — 9875DT 9975DT 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — x996K-DT x996L-DT) x696DT x697DT — 6 2 2 2 — Pull Center to Center Projection ANSI Function Cylinder Type Optional Trim — — 01 — x990EO x996E
9875-F/9975-F Mortise Lock Fire Exit Device 9875-F/9975-F Mortise Lock Fire Exit Device 7500 Mortise Lock 9875-F/9975-F fire exit mortise lock devices for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors installations, UL listed for Fire Exit Hardware; See page 61 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. Fits door stiles as narrow as 4³|₄" (121mm).
Standard Trim EO DT Exit only Product Description 9875EO-F 9975EO-F — Trim Description Escutcheon Plate Size — — — 01 — — x990EO x996EO Optional #425 SNB Quantity for Device Product Description Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional #425 SNB Quantity for Device Dummy Trim Pull When Dogged Night Latch Key Retracts Latchbolt Hospital Latch Key Locks & Unlocks — — 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (
9827/9927 Surface Mounted Vertical Rod Device Top Latch Hex key dogging comes standard on 9827/9927 299 Top Strike 9827/9927 Surface Mounted Vertical Rod Device 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9827 device has a smooth mechanism case and the 9927 device has a grooved case.
Standard Trim EO Product Description DT Night Latch Key Retracts Latchbolt 9827EO 9927EO 9827DT 9927DT 9827NL 9927NL — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 — Optional #425 SNB Quantity for Device L Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cyli
9827-F/9927-F Surface Mounted Vertical Rod Fire Device Top Latch 9827-F/9927-F Surface Mounted Vertical Rod Fire Device 299F Top Strike 9827-F/9927-F fire exit surface mounted vertical rod device pairs of doors up to 8´ x 10´ (2438mm x 3048mm) , UL listed for Fire Exit Hardware. See page 68 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1.
Standard Trim EO Product Description DT Night Latch Key Retracts Latchbolt 9827EO-F 9927EO-F — — 9827NL-F 9927NL-F — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 — Optional #425 SNB Quantity for Device L Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylind
9857/9957 Three-Point Latching Device Top Latch 299 Top & Middle Strike 9857/9957 Three-Point Latching Device Hex key dogging comes standard on 9857/9957 Three-Point Latching Devices 9857/9957 three-point latching device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9857 device has a smooth mechanism case and the 9957 device has a grooved case.
Standard Trim EO Product Description DT Night Latch Key Retracts Latchbolt 9857EO 9957EO 9857DT 9957DT 9857NL 9957NL — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 — Optional #425 SNB Quantity for Device L Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cyl
9857-F/9957-F Three-Point Latching Fire Exit Device Top Latch 9857-F/9957-F Three-Point Latching Fire Exit Device 299F Top & Middle Strike 9857-F/9957-F fire exit three-point latching device for all types of single doors up to 4´ x 8´ (1219mm x 2438mm) or up to 8´ x 8´(2438mm x 2438mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. See page 68 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.
Standard Trim EO Product Description DT 9857TL-BE-F 9957TL-BE-F 374T x 990DT 374T-BE x 990DT — (70x273x21mm) (70x273x21mm) — — 03 Rim — — 2" (51mm) 11 or 12 1Z|v" Mortise — 2 6 2 2 2 2 2 2 — 990DT 990NL-R/V — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x696NL x697NL 6 2 2 2 L-NL L-BE L-DT Lever Key Locks & Unlocks Lev
9847/9947 Concealed Vertical Rod Device Top Latch 338 Top Strike Hex key dogging comes standard on 9847/9947 Concealed Vertical Rod Devices 9847/9947 Concealed Vertical Rod Device 9847/9947 concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case.
Standard Trim EO DT 9847EO 9947EO — Trim Description Escutcheon Plate Size — — — 01 — — x990EO x996EO Optional #425 SNB Quantity for Device Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional #425 SNB Quantity for Device TL-BE Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) Night Latch Key Retracts L
9847-F/9947-F Concealed Vertical Rod Fire Exit Device Top Latch 9847-F/9947-F Concealed Vertical Rod Fire Exit Device 338 Top Strike 9847-F/9947-F fire exit concealed vertical rod device for use on pairs of doors up to 8' x 10' (2438mm x 3048mm) , UL listed for Fire Exit Hardware. See page 68 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1.
Standard Trim EO DT Exit only Product Description 9847EO-F 9947EO-F — — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim — — 01 — — x990EO x996EO #425 SNB optional - HMD req. WD w/o SLM pkg. Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Handing #425 SNB optional - HMD req. WD w/o SLM pkg.
9848/9948 Concealed Vertical Rod Device Top Latch 338 Top Strike Hex key dogging comes standard on 9848/9948 Concealed Vertical Rod Devices 9848/9948 Concealed Vertical Rod Device 9848/9948 Concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit Hardware. Covers stock hollow metal doors with 86 or 161 cutouts. Devices are ANSI A156.3 – 2001 Grade 1. The 9848 device has a smooth mechanism case and the 9948 device has a grooved case.
Standard Trim EO DT Exit only Product Description 9848EO 9948EO — Trim Description Escutcheon Plate Size — — — 01 — — x990EO x996EO Optional #425 SNB Quantity for Device Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional #425 SNB Quantity for Device TL TL-BE Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with
9848-F/9948-F Concealed Vertical Rod Fire Exit Device Top Latch 9848-F/9948-F Concealed Vertical Rod Fire Exit Device 338 Top Strike 9848-F/9948-F concealed vertical rod device for use on pairs of doors up to 8´ x 10´ (2438mm x 3048mm), UL listed for Fire Exit Hardware. See page 68 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 9848-F device has a smooth mechanism case and the 9948-F device has a grooved case.
Standard Trim EO DT Exit only Product Description 9848EO-F 9948EO-F — — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim — — 01 — — x990EO x996EO #425 SNB optional - HMD req. WD w/o SLM pkg. Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Handing #425 SNB optional - HMD req. WD w/o SLM pkg.
9849/9949 Concealed Vertical Cable Device Top Latch 338 Top Strike Retrofit Bracket Hex key dogging comes standard on 9849/9949 Concealed Vertical Cable Devices Center Slide 9849/9949 Concealed Vertical Cable Device 9849/9949 concealed vertical cable device for use on single or double metal doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9849 device has a smooth mechanism case and the 9949 device has a grooved case.
Standard Trim EO DT 9849EO 9949EO — Trim Description Escutcheon Plate Size — — — 01 — — x990EO x996EO Optional #425 SNB Quantity for Device 9849DT 9949DT 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x697DT 9849NL 9949NL 990NL-R/V 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x697NL 9849NL-OP 9949NL-OP 110NL-MD 2 2 6 6 L Product Description Trim Description Escutcheon Plate Size Pull Center to Center Projection A
9849-F/9949-F Concealed Vertical Cable Fire Exit Device Top Latch 9849-F/9949-F Concealed Vertical Cable Fire Exit Device 338 Top Strike Retrofit Bracket 249 Top Strike Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 & 643E. US15 and US32D available with 98 Series only.
Standard Trim EO DT Exit only Product Description Trim Description Escutcheon Plate Size — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim — — 01 — — x990EO x996EO #425 SNB optional - HMD req. WD w/o SLM pkg.
9847WDC/9947WDC Wood Door Concealed Vertical Rod Device Top Latch 338 Top Strike 9847/9947 Wood Door Concealed Vertical Rod Device Hex key dogging comes standard on 9847/9947 Wood Door Concealed Vertical Rod Devices 9847WDC/9947WDC concealed vertical rod device for use on single or double wood doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC device has a smooth mechanism case and the 9947WDC device has a grooved case.
Standard Trim EO Product Description DT 9847WDC-TL 9947WDC-TL 376T-WDC x 990DT 9847WDC-TL-BE 9947WDC-TL-BE 376T-WDC-BE x 990DT — (70x273x21mm) (70x273x21mm) — — 03 Rim — — 2" (51mm) 11 or 12 1Z|v" Mortise — — 2" (51mm) 16 6 2 2 9847WDC-EO 9947WDC-EO 9847WDC-DT 9947WDC-DT 9847WDC-NL 9947WDC-NL 9847WDC-NL-OP 9947WDC-NL-OP — 990DT 990NL-R/V 110NL-WD — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 3" x 14³⁄₁₆" x ³⁄
9847WDC-F/9947WDC-F Wood Door Concealed Vertical Rod Fire Device 9847WDC-F/9947WDC-F Wood Door Concealed Vertical Rod Fire Device Top Latch 338 Top Strike 9847WDC-F/9947WDC-F fire exit concealed vertical rod device for use on pairs of doors up to 8' x 9' 3" (2438mm x 2819mm) double wood doors, UL listed for Fire Exit Hardware. See page 68 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1.
Standard Trim EO Night Latch Key Retracts Latchbolt — — 9847WDC-NL-F 9947WDC-NL-F 9847WDC-NL-OP-F 9947WDC-NL-OP-F 990DT 990NL-R/V 110NL-WD 9847WDC-TL-F 9947WDC-TL-F 376TWDC x 990DT 9847WDC-TL-BE-F 9947WDC-TL-BE-F 376TWDC-BE x 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996L-NL x996L-NL x696NL x697NL — (70x273x21mm) (70x273x21mm) — — 01 — — x990EO x996EO 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x996L-DT x696DT x69
9849WDC/9949WDC Wood Door Concealed Vertical Cable Device Top Latch 338 Top Strike Retrofit Bracket 9849WDC/9949WDC Wood Door Concealed Vertical Cable Device Hex key dogging comes standard on 9849/9949 Wood Door Concealed Vertical Cable Devices 9849WDC/9949WDC concealed vertical cable device for use on single or double wood doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC device has a smooth mechanism case and the 9947WDC device has a grooved case.
Standard Trim EO DT Trim Description Escutcheon Plate Size 9849WDC-EO 9949WDC-EO — — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim — — 01 — — x990EO x996EO Optional #425 SNB Quantity for Device Night Latch Key Retracts Latchbolt 9849WDC-DT 9949WDC-DT 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT x696DT x697DT 9849WDC-NL 9949WDC-NL 990NL-R/V 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 03 Rim — x996K-NL x996
9849WDC-F/9949WDC-F Wood Door Concealed Vertical Cable Fire Device 9849WDC-F/9949WDC-F Wood Door Concealed Vertical Cable Fire Device Top Latch 338 Top Strike Retrofit Bracket Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 & 643E. US15 and US32D available with 98 Series only.
Standard Trim EO DT Night Latch Key Retracts Latchbolt — — 990DT 3" x 14³⁄₁₆" x ³⁄₃₂" (76x360x2mm) 5¹⁄₂" (140mm) 2" (51mm) 02 — — x996K-DT x996L-DT) x996L-DT x696DT x697DT 9849WDC-NL-F 9849WDC-NL-OP-F 9949WDC-NL-F 9949WDC-NL-OP-F 990NL-R/V 110NL-WD 3" x 14³⁄₁₆" x ³⁄₃₂" — (76x360x2mm) 5¹⁄₂" (140mm) — 2" (51mm) — 03 03 Rim Rim — — x996K-NL x996L-NL x996L-NL x696NL x697NL — Pull Center to Center Projection ANSI Function Cylinder Type Handing Optional Trim — — 01 — — x990EO x996EO Optional #425 SNB Quan
98/99 Optional Trim Knob, Exit Only and Thumbpiece Trim – 990 & 996K K-NL K Trim Options Knob Key Locks & Unlocks 44 Knob – Night Latch Key Retracts Latchbolt K-BE Knob – Blank Escutcheon Always Operable (No Cylinder) K-DT Knob – Dummy Trim Pull When Dogged EO Exit Only Plate TP Thumbpiece Key Locks & Unlocks TP-BE Thumbpiece Blank Escutcheon Always Operable (No Cylinder) EO Exit Only Plate Trim 996K 996K-NL 996K-BE 996K-DT 996EO 990TP 990TP-BE 990EO Description 2³⁄₄" x 10³⁄₄" x ²⁷⁄₃₂" 2³⁄
98/99 Optional Trim Optional Trims – 696 DT NL TP TP-BE Night Latch Key Retracts Latchbolt Thumbpiece Key Locks & Unlocks Thumbpiece – Blank Escutcheon Always Operable (No Cylinder) 696DT 696NL (70x273x21mm) (70x273x21mm) 5¹⁄₂" (140mm) 2¹⁄₆" (52mm) 02 5¹⁄₂" (140mm) 2¹⁄₆" (52mm) 03 696TP 1⁵⁄₈" x 13¹⁄₂" x ³⁄₁₆" (41x343x5mm) 5¹⁄₂" (140mm) 2¹⁄₆" (52mm) 05 696TP-BE 1⁵⁄₈" x 13¹⁄₂" x ³⁄₁₆" (41x343x5mm) 5¹⁄₂" (140mm) 2¹⁄₆" (52mm) 15 — Rim Rim — — — 1Z|v" Mortise — 1Z|v" Mortise — — — 2 2 2
98/99 Optional Trim E996L Electrified Breakaway Lever E996L electrified lever trim provides remote locking and unlocking. Furnished standard in fail safe (FS) condition, can be field converted to fail secure (FSE) where allowed. E996L is furnished standard with cylinder operation for nightlatch (NL) function, or with blank escutcheon (BE). Specification: Solenoid – Continuous Duty 24VDC Trim Options Solenoid Draw – 0.22 amp. To order, specify: 1. Use “E” prefix, example E996L.
98/99 Optional Trim Notes Trim Options This page intentionally left blank 47
Schlage AD-Series AD-Series Adaptable Electronic Locks Standalone The AD-Series was designed to be the right choice for today, and is ready to adapt to whatever the future holds. Standalone locks are a cost-effective solution for doors that do not require real-time monitoring.
Schlage CO-Series CO-Series Electronic Locks from Schlage In the world of standalone electronic locks, nothing compares to the CO-Series from Schlage. And because CO-Series locks offer a wide variety of options, it’s easy to find the right solution for any facility. For openings with a relatively small number of users, we recommend the C0-100. It’s an offline keypad programmable lock. For larger applications try the CO-200 or CO-250. They’re computer programmable locks that can provide audit trails.
98/99 Strike/Stile Information Standard Single Door Device Type STRIKE Standard DOUBle Door TRIM/STILE STRIKE W/MULLION* 990/996 696/697 98/99 OPTIONAL Single Door TRIM/STILE STRIKE TRIM/STILE 990/996 696/697 299 x 4954 4¹⁄₂" 4³⁄₈" (114mm) (111mm) 4⁷⁄₈" 4³⁄₄" (124mm) (121mm) Strike Options / Dogging Options 3¹³⁄₁₆" (97mm) XP 98/99 909 909 x 4954-XP — — — 98-F/99-F 299F 499F x 9954 — — — XP98-F/XP99-F 909 — — — 9875 9975 9875-F 9975-F 9857 9957 954 x 9954-XP 4⁷⁄₈" 4³⁄₄"
98/99 Strike Information Strikes for rim devices 264 299 299F 499F 1408 Projection ⁹⁄₁₆" (14mm) Projection ¹³⁄₁₆" (21mm) Projection ¹³⁄₁₆" (21mm) Projection ¹⁵⁄₁₆" (24mm) One per pair of doors 1439–Blade Stop 1410–Integral Stop 1606 1609 Projection ¹⁄₂" (13mm) Projection ¹⁄₂" (13mm) Projection ³⁄₈" (10mm) Panic Devices Only XP Strikes for rim devices Strikes for vertical cable devices 349 249 954 249 - Top Strike 1" (25 mm) 349 - Bottom Strike 1¹⁹⁄₃₂" (40 mm) 1¹⁄₂" (38 mm) 2³⁄₄" (70 mm
98/99 Dogging Options CD Cylinder Dogging SD Special Center Case Dogging Cylinder dogging is available on all 98/99™ Panic Exit devices to replace the standard hex key dogging. Unit requires a standard 1¹|₄" (32mm) mortise cylinder with an inverted straight cam (Schlage Cam B502-191 reference). CDK Cylinder Dogging Kit* Special cylinder dogging in the center case is available for Chexit, EL, QEL, ALK panic devices to allow for mechanical push/pull operation.
98/99 Electrical Options RX Request to Exit SS Signal Switch The RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the pushpad. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. The RX switch option should not be used to control a load, but as a signalling switch (0.5 amps. resisitive maximum). The RX switch is available in a low current (LC) switch.
98/99 Electrical Options CX The Chexit® Designed for use on delayed exit applications, the Chexit s ystem is ideal for controlled areas. All controls, auxiliary locking, local alarm, and remote signalling are self-contained in the Chexit, providing safe, secure, easy to install and simple to operate door control and exit hardware. Chexit controlled exit device for use on Panic or Fire Exit hardware applications.
98/99 Electrical Options Chexit Typical Application ALK Alarm Kit 120 VAC 3 x 14 ga. 2 x 12 ga. Power Supply To Fire Alarm 2 x 18 ga. The ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key.
98/99 Electrical Options E Electric Mortise Lock Device Electrical Options & Accessories The electric mortise lock device has all the versatility and advantages of the standard mortise lock device, plus the advantage of being electrically controlled by a remote switching device, an access control system or an automatic fire alarm system. The device features the E7500 mortise lock. The E7500 controls the locking of the outside trim.
98/99 Electrical Options EL Electric Latch Retraction QEL Quiet Electric Latch Retraction The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
98/99 Electrical Accessories Power Supplies Series PS902/914 PS902 Number of Connectors on Power Supply for the following: Distribution Boards Battery Back-up Board PS904 PS906 PS914 2 amps 4 amps 6 amps 4 amps 1 1 2 3 2 1 1 1 Note: One fire alarm board can be connected directly to the PS902. If a fire alarm board is desired for the PS904, PS906 or PS914 it can be connected to a distribution board.
98/99 Electrical Accessories EPT Electrical Power Transfer PNT Pneumatic Transfer Electric Power Transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideal for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. The EPT-2 and EPT-10 are U/L listed as “miscellaneous door accessory”.
Mechanical Options & Accessories 98/99 Mechanical Options XP Extra Performance LBR Less Bottom Rod, Panic and Fire Rated For increased security the XP98/99 Rim Exit Device has a static load force resistance of more than 2,000 pounds, twice that of standard rim exit devices. The two-piece latch bolt forms a 90° latch-to-strike contact. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure.
98/99 Mechanical Options SG Safety Glow Self-illuminating touchpad defines the location of the exit door in dark or smoke-filled area. The Safety Glow coating is a special powder coat finish that glows brightly during low or no light conditions. This coating was developed to meet MEA standards where luminescent exit door markings are required in commercial facilities. There are no batteries or electronics, the coating is charged when exposed to light.
98/99 Mechanical /Accessories PN Pneumatic Controlled Exit Devices Mechanical Options & Accessories The PN feature provides remote latch bolt retraction in hazardous areas where electrically operated devices would not be permitted. The pneumatic solenoid will retract the latch bolt for momentary or prolonged periods. PN exit devices are particularly suited for use with automatic door operators. The PN feature is available on both Panic and Fire Exit Hardware devices.
98/99 Device Options & Accessories RG-27 Vertical Rod and Latch Guard Series RG-27 Vertical Rod and Latch Guards protect the bottom rods of exit devices from the damaging impacts of carts or gurneys passing through doors. (If bottom rods become damaged, the exit device will not function as intended and can jeopardize the ability to exit safely during an emergency.
98/99 Device Options & Accessories Cylinders Cylinders are not furnished with device or trim and must be specified when ordering. Refer to trim pages for cylinder type.
98/99 Device Options & Accessories Mullions Removable Steel Mullions provide single door performance in double door openings with rim devices. Mullions are easily removed by loosening bottom set screw and removing top fitting cover. The top mullion fitting is attached to the frame and is concealed by the fitting cover. Steel mullions are 2" (51mm) wide and 3" (76mm) deep, with a wall thickness of ¹⁄₈" (3mm). Mullions are shipped with mounting screws and prepared for strikes.
98/99 Device Options & Accessories Sex Bolts Sex Bolts when ordered with devices may be furnished with screw lengths different than shown in Column B. Below, Column B indicates popular sizes. Sex Bolts ordered separately are not furnished with screws. If screws are required refer to chart below and order screws by description as a separate item. Other screw lengths may be used based on minimum and maximum allowable thread engagement, shown in column "C.
98/99 Function, Grade, Type Options ANSI Function, Grade & Type Function Grade 1, Type 1 Grade 1, Type 2 Grade 1, Type 3 Grade 1, Type 7 Grade 1, Type 7 Grade 1, Type 8 Grade 1, Type 8 Grade 1, Type 8 Grade 1, Type 9 1 98EO & F 99EO & F 9827EO & F 9927EO & F 9875EO & F 9975EO & F 9847WDCEO & F 9947WDCEO & F 9849WDCEO & F 9949WDCEO & F 9847EO & F 9947EO & F 9848EO & F 9948EO & F 9849EO & F 9949EO & F 9857EO & F 9957EO & F 2 98DT 99DT 9827DT 9927DT 9875DT 9975DT 9847WDCDT 9947WDCDT 98
UL Listing for Fire Exit Hardware UL Listed Fire Exit Hardware Label and Opening Size Double Door Additional Information Exit Device 68 98-F 99-F 9875-F 9975-F 9827-F 9927-F 9827LBR-F 9927LBR-F 9857-F 9957-F 9847-F 9947-F 9847LBR-F 9947LBR-F 9848-F 9948-F 9849-F 9949-F 9849LBL-F 9949LBL-F Door Material Single Door With 9954 Mullion With 9854 Mullion With KR9954 Mullion With KR9854 Mullion VxV V x Mortise Same Direction Same Direction VxV Double Egress Metal 3 Hour 4' x 10' 3 Hour 8' x 10' 3 H
98/99 Finishes A. Center Case Cover B. Touch Bar End Cap C. Touch Bar Trim D. Cover Plate E. Mechanism End Cap F.
98/99 Finishes Finishes Finishes* Color US Number BHMA Number Color US Number BHMA Number Chromium, Polished US26 625 Bronze, Dull US10 612 Anodized, Aluminum US28 628 Need Swatch Available for 35A ONLY US15 619 Chromium, Dull US26D 626 Need Swatch Satin Stainless Steel US32D 630 Brass, Polished US3 605 Duranodic Dark Bronze 313 710 Brass, Dull US4 606 Black 315 711 Satin Nickel Special Finishes Color US Number BHMA Number Satin Chrome, Antimicrobial US26D-AM 62
Ingersoll Rand (NYSE:IR) advances the quality of life by creating and sustaining safe, comfortable and efficient environments. Our people and our family of brands—including Club Car®, Ingersoll Rand®, Schlage®, Thermo King® and Trane®—work together to enhance the quality and comfort of air in homes and buildings; transport and protect food and perishables; secure homes and commercial properties; and increase industrial productivity and efficiency.
