Specifications
36
The STC/DSTC
system*
This button is used to reduce
or reactivate the functions in
the STC/DSTC system.
When the LED in the button
comes on, the STC/DSTC
system is activated (if no fault
arises).
In order to reduce the effect of
the STC/DSTC system for
reasons of safety the button
must be held in for at least a half second. (The
R version requires that system deactivation -
reactivation be repeated three times in order to
deactivate the system.)
3603553m
3603549m
3603546m
Child safety locks in
the rear doors
(option)
Use this button when you wish
to activate or deactivate the
electric child safety locks in the
rear doors. The ignition key must be in position
I or II. When the child safety locks are acti-
vated, the LED in the button lights. A message
is shown in the display when you activate or
deactivate the child safety locks.
Switches in the centre console
3603558m
Active chassis,
FOUR-C (option)
Select between two different
modes:
Comfort or Sport. See page
102 for more information.
3603554m
* Option on some markets.
The system is standard on V70 R.
The text ”STC SPIN CONTROL OFF” /
"DSTC SPIN CONTROL OFF" is shown on
the display. R version: "DSTC REDUCED
FUNCTION" will be displayed.
Reduce the system if you must use a wheel of a
different dimension than the other wheels.
The STC/DSTC system is reactivated when the
engine is started.
WARNING!
Keep in mind that the driving characteristics
of the car change if you deactivate the STC/
DSTC system.
NOTE! The order of the buttons may vary.
3603680m
BLIS - Blind Spot
Information System
(option)
Press the button to deactivate
or reactivate the function. See
page 120 for further informa-
tion.










