Specifications

144
Replacing bulbs
Dipped beam
To remove the bulb:
· Switch off all lights and turn the ignition
key to position 0.
· Remove the cover.
· Unplug the connector.
· Disconnect the spring clamp. First push to
the right so that the spring clamp discon-
nects, then out and down.
· Pull out and remove the bulb.
To fit:
· Fit the new bulb. It can only be positioned
one way.
· Press the spring clamp up and a little to the
left so that it fastens in its catch.
· Plug in the connector.
· Refit the cover.
Main beam
To remove the bulb:
· Switch off all lights and turn the ignition
key to position 0.
· Remove the cover.
· Pull out the bulb.
· Unplug the connector.
· Turn the lamp anticlockwise a half turn, pull
out and remove the bulb.
To fit:
· Fit the new bulb. It can only be positioned
one way.
· Plug in the connector.
· Put the lamp back in place and turn it so that
the connector faces down.
· Refit the cover.
Dipped beam bulb Main beam bulb
350178
8
3501786m
Fitting the dipped beam bulb