Specifications

80 – 81www.dometic-waeco.com Contents, specifications and availability are subject to change serving the technical improvement.Contents, specifications and availability are subject to change serving the technical improvement.
IU-/IU0U automatic chargers
PerfectCharge
The new class of automatic chargers
Lightweight, compact, functional
WAECO PerfectCharge IU 6, IU 8, IU 12 3.16
IU or IU0U automatic chargers
Suitable for wet, gel
and AGM batteries
Advanced, lightweight
and efficient
technology
New, functional
WAECO design
Neat cable
management,
no tangled cables
Features & functions
› Realistic charging current specifications
› High efficiency (up to 85%) with advanced
switch-mode technology
› Float charging after charge stop
(IU6: automatic charge stop)
› IU charging characteristics, 3-step (IU 6)
or 4-step (IU 8, IU 12)
Steps: 1. Battery check
2. I-phase
3. U-phase
4. Float charging (IU 8 and IU 12)
› Safety circuits (protection against overload,
overheat, short circuit, reverse poling)
› Automatic battery check (full or
deep-discharged batteries won’t be charged)
› Advanced, functional WAECO design with
cable management
› High-grade finish in aluminium/plastic
› Especially handy and lightweight
IU 6 IU 8 IU 12
Input voltage range 207 to 253 volts AC
Max. input current 1 A 1.5 A 2 A
Energy efficiency up to 80% up to 85% up to 85%
No-load power consumption 6 watts 10 watts 10 watts
Nominal battery voltage 12 volts DC
Nominal charging current 6 A 8 A 12 A
Charging characteristics IU automatic, IU0U automatic, IU0U automatic,
3-step 4-step 4-step
Ambient temperature 0°C to +40°C
Dimensions (W x H x D) 155 x 148 x 198 mm 155 x 148 x 228 mm 155 x 148 x 228 mm
Weight 1.53 kg 1.92 kg 1.92 kg
Scope of delivery Battery chargers, operating instructions
Product Ref. No.
PerfectCharge IU 6, 6 A MBC-IU6
PerfectCharge IU 8, 8 A MBC-IU8
PerfectCharge IU 12, 12 A MBC-IU12
IU 12
IU 8
IU 6
The new WAECO PerfectCharge battery chargers offer
a decisive advantage over conventional chargers:
the IU charging characteristics. The battery is initially
charged at a constant current and subsequently at a
constant voltage. On the IU 8 and IU 12 models, this
process is followed by a retention charge, which qualifies
them as IU0U chargers. An ideal solution not only for
commonly used wet lead batteries, but also for gel and
AGM batteries. Advanced design, highly functional
down to the last detail: neat cable management
instead of tangled cables, and a “garage” for battery
clamps.
Automatic chargers with many intelligent features