Specifications

SENSUS INFOTAINMENT - TEL*/BLUETOOTH
®
MODE
TEL*/BLUETOOTH
®
MODE
If you are not already in this mode’s normal view,
press
TE L* on the centre console to access all of
the telephone features and to use Bluetooth
®
to pair
Bluetooth
®
-enabled phones or other external devices.
PAIRING A BLUETOOTH
®
DEVICE WITH SENSUS
INFOTAINMENT
Method 1
Search for the external device using the Sensus
Infotainment menus (
this example assumes that
there are no devices connected).
1. Be sure that the external device is discoverable
(that its Bluetooth
®
function is activated) and fol-
low the instructions on the Sensus Infotainment
screen.
2. Press the thumb wheel or
OK and follow the direc-
tions displayed on the Sensus Infotainment screen.
The external device is now paired to Sensus Infotain-
ment.
If this procedure has not functioned, press
EXIT
twice and continue to method 2.
Method 2
Search for the car using the external device’s Blue-
tooth
®
function.
1. Make the car discoverable by scrolling to
Phone
settings and pressing the thumb wheel or OK.
Discoverable will be displayed. Press the thumb
wheel or OK.
2. Select
My Volvo Car on the external device’s
screen and follow the directions provided.
3. Enter a PIN code of your choice in the external
device and press its button to pair the device.
Press the thumb wheel or
OK and enter the same
PIN code in the car using the centre console
keypad.
The external device’s name will displayed on the car’s
screen and it is now paired to Sensus Infotainment.
SHORTCUT VIEW (COMMON PHONE FUNC-
TIONS)
From telephone mode’s normal view, press TE L*
again to display the shortcut menu. Scroll to the
desired alternative and press the thumb wheel or
OK.
Press
EXIT to return to telephone mode’s normal
view.
QUICK ACCESS TO THE CONNECTED PHONE’S
LIST OF CONTACTS (PHONE BOOK)
1. If you are not already in TEL* mode, press TEL to
enter telephone mode’s normal view.
2. Turn the thumb wheel or
TUNE to display the list
of contacts. Continue turning to scroll through the
list.
Press the thumb wheel or
OK to select a contact. If
there is only one phone number for this contact, a call
will be initiated. If there are several phone numbers,
scroll to the desired one and press the thumb wheel
or OK to initiate a call.
CHANGING PHONES (OR OTHER DEVICES)
Two Bluetooth
®
devices (e.g., a phone and an iPod
®
)
can be active at the same. However, two phones can-
not be used at the same time to make calls.
To change the currently connected phone:
1. Press
TE L* to enter telephone mode’s normal
view.
2. Press
TE L* again to display the shortcut menu.
3. Scroll to
Change phone and press the thumb
wheel or OK.
4. Scroll to the desired phone and press the thumb
wheel or
OK to select it. This phone can now be
used to make or receive calls, etc.
You will then be returned to the telephone mode’s
normal view.