WEB EDITION SENSUS NAVIGATION
Text and symbols on the map The car's current position + Point to press for opening the itinerary Map scale List with the itinerary's guidance points Driving distance to the destination/Arrival time at the destination + Point to press for switching between headings Point to press for a list of the itinerary's POI and traffic information Destination/final destination Intermediate destinations Guidance point Car (blue triangle) on the planned route Traffic problems with information Minimise (expanded view) or
SENSUS NAVIGATION Sensus Navigation is a satellite based traffic information and route guidance system. Sensus Navigation guides you to a destination and provides information along the route. It notifies you of situations that could make driving difficult, such as accidents and road works, and suggests alternative routes in such cases. It is possible to draw up an itinerary, search for POI (Point of interest) along the route, store your own favourite places etc.
TABLE OF CONTENTS GET STARTED NOW 2 Quick guide to map navigation 8 Simple guidance to a destination 8 GET TO KNOW SENSUS NAVIGATION Common operations during map navigation CONTROLS 12 Displays and operating controls for map navigation 16
VOICE RECOGNITION SPECIFY A DESTINATION Voice recognition and map navigation 20 Voice recognition 21 Using voice recognition 22 Voice recognition settings 22 ITINERARY AND ROUTE General information about entering a destination 24 Define the destination by clicking on the map 24 Specify destination with free text searching 25 Specifying a destination with Latest/ Favourites/Library 27 Specifying a destination with POI 29 Specifying a destination with an address 30 Save the destination
TRAFFIC INFORMATION Traffic information 4 SETTINGS 40 MAP AND SYSTEM INFORMATION Map navigation in the driver display 42 Updating map data with MapCare 52 Sensus Navigation settings 42 Updating map data via Remote updating 53 Map settings 43 Updating map data via PC and USB 54 Route settings 46 License agreement for map navigation 56 Traffic settings 47 Copyright 58 Guidance settings 48 System settings 49
SOME COMMON "ERRORS" Fault tracing for Sensus Navigation ALPHABETICAL INDEX 60 Alphabetical Index 63 5
GET STARTED NOW
GET STARTED NOW Quick guide to map navigation WARNING The car's electrical system is activated automatically when the driver's door is opened. Observe the following. Navigation On/Off • Direct all your attention to the road and make sure that all your concentration is on driving. • Follow applicable traffic legislation and drive with good judgment. • Due to weather conditions or time of year affecting the road conditions, some recommendations may be less reliable.
GET STARTED NOW Step Screen/ menu Action 4 A map is shown. Scroll to the desired location on the map and give a long press on the position. 5 A field with the text Start navigation is shown on the screen. Tap on Start navigation. 6 A map with highlighted route is shown. Guidance starts - follow the instructions on the driver display.
GET TO KNOW SENSUS NAVIGATION
GET TO KNOW SENSUS NAVIGATION Common operations during map navigation Driving direction or north up on the map Compass symbols Compass direction N North NE NorthEast E East SE SouthEast Zoom S South Scroll SW SouthWest W West NW NorthWest Some common operations during map navigation are described below.
GET TO KNOW SENSUS NAVIGATION Tap once on the centre display with two fingers spread apart. around the car symbol according to how the car turns. The compass symbol indicates which direction north is (N) on the map, and the centre of the compass shows the direction in which the front of the car is pointing. The map scale is not shown in the 3D mode. Find the car symbol on the map or Touch the centre display with two fingers spread apart, then draw them together.
GET TO KNOW SENSUS NAVIGATION Switching heading display Finding the way back to the map view Click here to change the map heading. The centre display Home button.
CONTROLS
CONTROLS Displays and operating controls for map navigation The driver display Volvo Sensus Navigation is presented and operated in several different ways, e.g. via the driver display, Head-up display and voice commands. The centre display screen Open/close During driving the driver is guided by voice guidance and instructions on the driver display.
CONTROLS Navigating and selecting in the menu 1. Scroll through the alternatives by pressing up or down (3) 2. Confirm or mark a selected function by pressing confirm (4). > The function is activated and for some selections the menu is closed. HUD – Head-up-display* Voice recognition Many functions can also be performed with voice commands. Press the steering wheel button, wait for the signal, then say, for example, “Drive Home”.
VOICE RECOGNITION
VOICE RECOGNITION Voice recognition and map navigation – With voice recognition control, many functions in the navigation system can be activated by spoken words. Press the steering wheel button one of the following commands: • “Navigation” - Initiates a navigation dia- logue and shows examples of commands. The following are some examples of voice commands that are unique to map navigation. Searches for POIs1 within the specified category in a town/locality.
VOICE RECOGNITION • "Resume guidance" - Resumes the paused guidance on the map. • "Turn off voice guidance" - Switches off voice guidance. • "Turn on voice guidance" - Starts the switched-off voice guidance. Related information • Displays and operating controls for map navigation (p. 16) • • • Voice recognition (p. 21) Using voice recognition (p. 22) Voice recognition settings (p.
VOICE RECOGNITION Using voice recognition Basic instructions for using voice recognition control. Depress the steering wheel button for voice recognition to activate the system and initiate a dialogue using voice commands. from the phone book if the contact has more than one phone number (e.g. home, mobile, work), e.g: Press • For a command - speak after the tone in a normal voice at normal speed. • • Do not speak while the system is replying (the system cannot understand commands during this time).
SPECIFY A DESTINATION
SPECIFY A DESTINATION General information about entering a destination Define the destination by clicking on the map Define the destination by clicking on the map (p. 24) A destination can be specified in different ways marking with a finger on the map is one of them. In many cases it is simplest to scroll to the desired position and tap it with your finger. A destination can be entered in different ways.
SPECIFY A DESTINATION Specify destination with free text searching Switches between CAPITAL (uppercase) and small (lowercase) letters A destination can be specified in different ways free text searching is one of them. Figures and special characters Keyboard The on-screen “keyboard” can be used to type most characters and to search for destinations. To display the keyboard: 3. Select Go here - Guidance starts. Click on Set dest.
SPECIFY A DESTINATION Filter A hit list can be specified and shortened with the Filter button. Filter for hit lists. The availability of filters can vary from case to case - the following filters are available: • Along route - Only hits along the route will appear in the hit list. • Streets - Only streets/roads will appear in 1. 2. Select/mark a suitable suggestion in the list - the Info card2 for the suggestion is shown. 3.
SPECIFY A DESTINATION Coordinates A destination can also be specified with its map coordinates. • Type, for example, “N 58.1234 E 12.5678” and tap Search. Map coordinates can be typed in various ways, as shown in these examples: Specifying a destination with Latest/Favourites/Library A destination can be specified in different ways selecting from a list is one of them. To display these lists: 1. Click on Set dest.
SPECIFY A DESTINATION Favourites Library Markers are extinguished when the positions have been read. For more information see the "Save destination with Send to car" section. Each of the lists positions can be edited with respect to Name, Position, Internet address and Telephone number (max three tel.nos. per position) using Edit list. Related information Favourite marked positions from the Library are listed here. Scroll and select.
SPECIFY A DESTINATION Specifying a destination with POI A destination can be specified in different ways specifying a POI3 is one of them. 1. Click on Set dest. in the lower margin - the map view switches to keyboard with a search field and various search alternatives in the upper margin. 2. Then select POI from the upper margin. In the "Map settings" section it is possible to select which POIs shall be shown on the map. All POIs that are available in the current region are listed there.
SPECIFY A DESTINATION Specifying a destination with an address Select one of the available text field options and type using the centre display keyboard: Save the destination with "Send to Car" A destination can be specified in different ways specifying an address is one of them. • • • • • A destination can be specified in different ways using the Send to Car function (Send to Car) is one of them. 1. Click on Set dest.
SPECIFY A DESTINATION More information about other suppliers and the Send to Car function is available on the Volvo Cars support page (support.volvocars.com). Related information • Specifying a destination with Latest/Favourites/Library (p. 27) • General information about entering a destination (p. 24) Type in the VIN no. or Volvo ID and select "Send". 1. Connect to the internet (here.com) - a map service is opened 2. Right click on the desired position 3. Select "Send this location to car" 4.
ITINERARY AND ROUTE
ITINERARY AND ROUTE Itinerary and Alternative route Show an alternative route While guidance is active you can look at the itinerary or check if there are alternative routes. At any time while guidance is active the driver can see if there are alternative routes. Proceed as follows: Show itinerary To see/show the itinerary: Select one of the itinerary rows and follow the instructions. Delete itinerary The whole itinerary or individual Intermediate destinations can be erased: 1.
ITINERARY AND ROUTE 2. 3. Click on Alternative routes - then any available alternative routes for the rest of the journey are shown. Click on the map - the updated route is then shown on the map and guidance resumes. See also "Alternative routes" in the "Route settings" section. Related information • • • • Related information • • • • Select detour (p. 38) Itinerary and Alternative route (p. 34) Information cards on the map (p. 37) Route settings (p.
ITINERARY AND ROUTE POIs along route A list of POIs along the route can be presented. 1 Click on "Ahead" (Ahead) A list then shows current POI categories at for example a turn-off or a service area. 1. Select the desired category whereupon a new list is opened - sometimes with subcategories. 2. Continue to "zoom in" until a single POI can be selected. 3. Mark a POI in the list whereupon its information card is shown. 4. Select one of the information cards alternatives and follow the instructions.
ITINERARY AND ROUTE To see information about a specific traffic disruption: • Select from the list - information is given about the disruption. Guidance via an alternative route is given by selecting Avoid. Related information • • Traffic information (p. 40) Traffic settings (p. 47) Information cards on the map Every icon for destination, intermediate destinations, favourites, POIs, traffic disruptions, etc.
ITINERARY AND ROUTE Select detour 3. If the driver wants to avoid the nearest segment of a route, e.g. because the road is closed, the Detour function can be selected. After the proposal is accepted, guidance is resumed - now with the detour selected as the route. An alternative to the Detour function is to choose another road and diverge from the itinerary's route - the system then updates the route automatically and continues guidance to the destination along the most suitable route.
TRAFFIC INFORMATION
TRAFFIC INFORMATION Traffic information The navigation system continuously receives transmitted information about traffic flow and events. NOTE When disturbances are more severe their extent is also shown with a RED line along the side of the road, e.g. in the event of road works. The line indicates at the same time in which travel direction the disturbance applies - if the disturbance is in both directions the road section is marked with a line on both sides.
SETTINGS
SETTINGS Map navigation in the driver display Sensus Navigation settings An activated route is automatically shown in the driver display. The user can choose how the route and other information shall be presented by making some settings. Map navigation can be presented in varying ways - the user has the possibility of selecting settings to personalise the map display. Proceed as follows to access the settings: Map display in the driver display is activated/deactivated here. 1.
SETTINGS • Traffic - Manage information about traffic disruptions • Guidance - Manage guidance • System - Information about updating the Map settings Possible options: Settings are selected here to define how the map should be shown on the screen. • • • • • software and maps. Related information • • • • • • Map settings (p. 43) POI Favourites Speed Cameras2 Map navigation in the driver display (p. 42) Route settings (p. 46) Traffic settings (p. 47) Guidance settings (p. 48) System settings (p.
SETTINGS Position format Map design POI Choose whether the current position is to be named/shown with its address or its coordinates. Select the colour scheme for the map display: Select here which POIs should appear on the map. Every category has two alternatives - either select that all POIs in a category are to be shown, e.g. "Transport services". • Address • Coordinates and altitude The following illustration shows both of the alternatives.
SETTINGS Or open the category with the ">" symbol and then select which subcategories shall or shall not be shown. POI subcategories. • Mark which POI categories shall be shown on the map with a click on Back or Close. For more information see "Specify destination with a POI".
SETTINGS Route settings Possible options: Standard route types Settings are selected here to define how the route should be calculated. • • • • • Select preset standard type for the route: Route Learning Alternative Routes Default Route Type Avoid Arrival Time Format Route learning Allow data collection to optimise route calculation.
SETTINGS Avoid Time format Traffic settings Select how arrival time should be specified: Settings are selected here to define how traffic information should be presented. • ETA5 - Calculated time of arrival at the destination • RTA6 - Remaining time to arrival The times shown apply to the time zone of the destination. Related information • • Sensus Navigation settings (p. 42) Itinerary and Alternative route (p.
SETTINGS Traffic events Decide which traffic events shall be shown on the map and shall be used for route calculation. Select one of the following options: • None • Major • All Related information • • • Sensus Navigation settings (p. 42) Traffic disruptions along the route (p. 36) Guidance settings Settings are selected here for how guidance should be presented. Traffic information (p. 40) Traffic flow Decide whether or not the traffic flow should be shown on the map, with green lines.
SETTINGS Possible options: • • • • • Voice Guidance Landmark Guidance7 Parking Near Destination System settings Select whether or not proposed parking places shall be shown when the car approaches the destination. Information about the updating of software and map data is shown here.
SETTINGS Map information Information about the navigation system's map data and short cuts to updates. • Map Information - Manage maps, updates and select favourite region. Related information • • 50 Sensus Navigation settings (p. 42) Updating map data with MapCare (p.
MAP AND SYSTEM INFORMATION
MAP AND SYSTEM INFORMATION Updating map data with MapCare An owner of Volvo Sensus Navigation can update the navigation system's map data via the internet. General information about updating Updating can be done direct to the car with remote updating using a mobile telephone connection or via a computer using a USB memory. The car's map is divided up into a number of predefined regions.
MAP AND SYSTEM INFORMATION • • • Copyright (p. 58) • System settings (p. 49) Fault tracing for Sensus Navigation (p. 60) License agreement for map navigation (p. 56) Updating map data via Remote updating Before doing a remote update via a mobile telephone connection, certain details must be attended to. Preparations Loading down map data from the internet 1. Sweep into view the centre display's application view. 2. Choose the Remote update service application and follow the instructions.
MAP AND SYSTEM INFORMATION Updating map data via PC and USB Before updating via a USB memory, some details must be attended to. Preparations Parameter Requirements USB standard (1.0/2.0/3.0): At least 2.0 File system (Ext2/NTFS/ FAT32): FAT32 Capacity (8/16/32/64 GB): The size of the map files is market related - see file size under "Detailed information" for each respective market on Volvo Cars support page (support.volvocars.com).
MAP AND SYSTEM INFORMATION (support.volvocars.com) and follow the instructions on the computer screen. 1. Click on "Detailed information" for the region that is to be updated. 2. A map image with information about the latest map data for the region is shown — verify that it is newer than the version in the car. 3. Connect a USB memory to the computer and download the update to the USB memory. Updating 1. Activate the navigation system in accordance with the earlier section "Current map version". 2.
MAP AND SYSTEM INFORMATION License agreement for map navigation A license is an agreement for the right to operate a certain activity or the right to use someone else's entitlement according to the terms and conditions in the agreement. END USER LICENSE AGREEMENT PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE HERE DATABASE. NOTICE TO THE USER THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE – BETWEEN YOU AND HERE EUROPE B.V.
MAP AND SYSTEM INFORMATION LIMITED WARRANTY HERE warrants that, subject to the warnings set out below, for a period of 12 months after acquisition of your copy of the Database, it will perform substantially in accordance with HERE’s Criteria for Accuracy and Completeness existing on the date you acquired the Database; these criteria are available from HERE at your request.
MAP AND SYSTEM INFORMATION Related information • • Copyright Updating map data with MapCare (p. 52) Copyright (p. 58) For information about copyright (© Copyright) see the "License agreement for map navigation" section Related information • • 58 Updating map data with MapCare (p. 52) License agreement for map navigation (p.
SOME COMMON "ERRORS"
SOME COMMON "ERRORS" Fault tracing for Sensus Navigation The following are examples of things that may be interpreted as navigation system faults. The position of the car on the map is wrong The Navigation system shows the position of the car to an accuracy of about 20 metres. The system may for example use toll roads or ferries while the driver has chosen to avoid them. For technical reasons, the system can only use larger roads when calculating a route extending over a long distance.
SOME COMMON "ERRORS" Information about the current version is available. In the "Updating map data - MapCare" there is more information about the version and which geographic area it covers. See also the Volvo Cars support page (support.volvocars.com) for further information about updating maps. Or contact a Volvo dealer. Related information • • Quick guide to map navigation (p. 8) Updating map data with MapCare (p.
ALPHABETICAL INDEX C I Copyright Information card 37 Send to Car Itinerary and Alternative route 34 Set destination 24, 25, 27, 29, 30 Settings Map options 43 Symbols facilities 29 56, 58 S D Destination Detour 24, 29 38 L License agreement 56 F M Facilities Symbols Map options 43 Map view 43 29 G Guidance quick guide Guidance points in Itinerary Guiding options 35 System activation 8 T P 8 30 POI along the route 36 Points of Interest (POI) 29 Traffic disruption along
V Voice control settings Voice recognition 64 22 20, 21
TP 18615 (English), AT 1505, MY16, Printed in Sweden, Göteborg 2015, Copyright © 2000-2015 Volvo Car Corporation
