Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 34(41)
2143-06-05-01
Valve Guide Wear, Checking
Cylinder head removed and installed in overhaul
stand
You must read and understand the precautions and
guidelines in Service Information, group 21, "General
Safety Practices" before performing this procedure.
If you are not properly trained and certified in this
procedure, ask your supervisor for training before
you perform it.
1
Remove the seal from the valve guide.
2
Rotate the cylinder head so that it is in the vertical
position.
3
C2002649
Fig. 41: Checking for valve wear
Insert a new valve guide so that the end of the valve
spindle is level with the edge of the guide.