Specifications

Volvo Trucks North America, Inc. Date Group No. Page

TSI 9.2003 211 007 25(41)

T2007096

Install the cam sensor wheel on the camshaft drive

gear. Install and torque tighten the three bolts to

25 Nm (19 ft-lb).

25 Nm

(19 ft-lb)

Clean the contact surfaces for the upper timing gear

cover. Replace with a new seal.

Apply an even bead of sealant around the timing gear

cover. Install the cover.

Note: Do not allow sealant to harden before installing

the cover.

W2002163

Fig. 27: Installing alignment tool J–41272

1 Upper gear cover

2 Alignment tool

3 Valve cover nut

4 Bolt supplied with J–41272

Install the alignment tool J–41272 on the forward

right-hand valve cover stud using an existing valve cover

nut. To attach the left-hand side, thread the bolt (supplied

with the tool) into the hole in the cylinder head. The top

of the cover must be flush with the top of the cylinder

head. Otherwise, oil leaks may result.

J–41272