Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 24(41)
10
W2002245
Tighten the bolts an additional
120 ± 5
per the torque sequence shown.
11
W2004266
Re-check camshaft timing. Rotate the engine opposite
the direction of rotation approximately 20
. Continue in
the direction of rotation until the two dots on the cam
gear are equally spaced on both sides of the camshaft
alignment tool, J–42773. Verify that the pointer on
the flywheel is within specifications (2 mm BTDC to 2
mm ATDC).
J–42773
12
T2007084
Fig. 26: Checking backlash
After the rocker assembly has been torqued in place, use
a dial indicator to perform a final check of the adjustable
idler gear backlash. Correct backlash is 0.05 – 0.17
mm (0.002 – 0.007 in.).
0.05 – 0.17 mm
(0.002 – 0.007 in.)