Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 23(41)
7
W2002245
T2008255
Insert the 0.10 mm (0.004 in.) feeler gauge on the load
sides of the (A and B) gear teeth.
8
Torque the bolts to an initial torque of only 15 ± 3 Nm
(11 ± 2 ft-lb).
Note: An additional 120 ± 5
is required after the correct
backlash is confirmed.
15 ± 3 Nm
(11 ± 2 ft-lb)
9
Check that both feeler gauges have the same
resistance when inserting them and pulling them
out. The correct backlash is 0.05-0.17 mm
(0.002-0.007 in.).
0.05-0.17 mm
(0.002-0.007 in.)