Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 22(41)
4
W2004266
Rotate the flywheel in the opposite direction of rotation
approximately 20
, and then in the direction of rotation
20
to the 0 mark exactly. If you pass the mark,
repeat this entire step.
CAUTION
Final rotation of the flywheel in the opposite direction of
normal rotation will result in an incorrect setting due
to the gear train lash.
5
Clean all sealant from front of the head.
6
Install the adjustable idler gear assembly.
Note: The bolts are the single-use “stretch” type and
should not be reused. Pipe sealant should be used on
the center bolt.