Specifications

Volvo Trucks North America, Inc. Date Group No. Page
TSI 9.2003 211 007 14(41)
3
C2002611
Clean the threads with a M16x2 thread tap.
Note: To remove residue from bolt holes, use chip
vacuum tool PT-2900
M16x2 tap,
PT-2900
4
Remove the tools used to hold down the liner.
WARNING
Always wear appropriate eye protection to prevent
the risk of eye injury due to contact with engine
debris or fluids.
5
Clean the cylinder block surface and around the cylinder
liner.
6
Install the new cylinder head gasket to the engine block
and the new rubber seal to the timing gear plate.
Note: Make sure that the seal is correctly positioned
against the timing gear plate.
7
Carefully lift the cylinder head onto the cylinder block.
Remove the lifting tool J–41503.
J–41503