Specifications

Volvo 1990 760 Model
Valve clearance, cold engine
inlet 0.004-0.006"
(0.10-0.15 mm)
exhaust 0.010-0.012"
(0.25-0.30 mm)
All specifications are subject to change without notice.
Engine (760 Turbo)
Liquid-cooled, gasoline, 4-cylinder in-line engine. Cast-iron cylinder block with cylinders bored directly
in block. Aluminum-alloy cylinder head with single overhead camshaft and separate intake and outlet
channels.
Engine lubrication is provided by a gear pump driven from the crankshaft. Full-flow type oil filter.
Exhaust emission control accomplished by fuel injection, Lambda-sond system and catalytic converter.
Exhaust-gas-driven turbo-compressor with intercooler
Type designation Volvo B230F-Turbo
Output(SAE J 1349) 162 hp at 4800 rpm (120 kW at 86 rps)
Max. torque(SAE J 1349) at rpm 195 ft. lbs. (265 Nm) at 2900 rpm
Number of cylinders 4
Bore 3.78" (96 mm)
Stroke 3.15" (80 mm)
Displacement 2.32 liters
Compression ratio 8.7:1
Valve clearance, cold engine Checking Adjusting
inlet 0.012-0.016" 0.014-0.016"
(0.30-0.40 mm) (.35-0.40 mm)
exhaust 0.012-0.016" 0.014-0.016"
(0.30-0.40 mm) (0.35-0.40 mm)
All specifications are subject to change without notice.
pg. 124 Specifications (cont.)
file:///K|/ownersdocs/1990/1990_760/90760_22.htm (4 of 13)12/30/2006 8:27:08 AM