Specifications

03 Advanced user mode
Settings
03
59
Reset to default
Return to the system’s factory settings for
route options.
•
Press , select OK and press ENTER.
NOTE
When the system calculates a route over
longer distances, it is designed to select
major roads (highways/freeways, etc.).
If you have set the system to avoid highways
and toll roads, the system will avoid guiding
you to these types of roads to as great an
extent as possible, and will only use such
roads when no other reasonable alternative
is available.
Map options
Select the way in which the map is displayed.
Settings Map options
•
Move among the functions with the
navigation control and press ENTER to
save.
POI selection
•
Press to access a sub-menu.
– Select Show to display all POI symbols on
the map.
– Select Hide to show no POI symbols.
– Select Show selected and press to select
the symbols to be displayed on the map. The
symbols selected to be displayed will be
marked with an X.
•
Select or unselect symbols with or
and press ENTER to save.
Map
Select Show or Hide. If the map is hidden, the
system will use an arrow for guidance.
Right map view
Choose to display the map in 2D (two dimen-
sional - straight from above) or 3D (three-
dimensional - angled from above).
•
When 3D is selected, the vehicle's direc-
tion is always toward the top of the screen.
•
When 2D is selected, choose whether 2D
Heading
or 2D North is to be at the top of
the screen.
Selecting elevation angle.
Settings Map Map view 3D
After selecting 3D with or and ENTER,
the panel for selecting the elevation angle will
be displayed. Select the desired angle with
or followed by ENTER and BACK.