600W Pure Sine Wave Power Inverter MODEL: VS-600PB V1.21.11 Warning: This manual contains important safety and operating instruction. Please read it carefully before use the unit.
SPECIFICATIONS VS-600PB Model Continuous Power 600W Peak Power 1200W Rated input Voltage 12VDC 24VDC Input Voltage Range 9.5~16VDC 19~32VDC Over Voltage Shutdown 16VDC 32VDC Low Voltage Shutdown 9.5VDC 19VDC Low Voltage Alarm 9.8VDC 19.
. PARTS LIST 1) DC Input Side 2) INSTALL THE INVERTER For this high-power inverter, due to its heavy weight, it is best to install it on a stable platform, such as a floor, a desktop or a fixed bracket. The supporting platform must have enough capacity to bear the weight of the product, and fix the product with four screws to prevent the product from slipping off. Fan Positive of DC input (+) Negative of DC input (-) 2. AC Output side Dual USB ports Power ON/OFF switch Grounding AC outlets 4.
The ground terminal must be connected to the ground wire, which will vary depending on where the power inverter is installed. In a vehicle, connect the ground terminal to the chassis of the vehicle. In a boat, connect it to the boat's grounding systems. In a fixed location, connect the ground terminal to earth. Warnings: ● To make sure the firmness of the connection. The ground wire must be 14AWG (2.08 mm2) or even larger. ● Do not operate the power inverter without connecting to the ground.
6) When not in use, press the power switch on the inverter, the power indicator on the inverter and the remote control box are off, indicating that it has been shut down. ② How to use USB port power supply The product provides two USB interfaces, which can provide a stable 5V DC voltage, and the maximum output current of each USB interface is 2.
WARNING: REVERSE CONNECTED THE CABLES WILL DAMAGE THE INVERTER AND AVOID YOUR WARRANTY! B. TROUBLESHOOTING TIPS Problem No output voltage, buzzer whistles continuously Reason Solutions Low Input DC Voltage Low Input DC Voltage High Input DC Voltage ● Do not use it when the battery is charging ● Check the rated voltage of the battery and make sure that it is in the allowable range of the input voltage. Overload Over temperature 14.
