Specifications

MoodMaker
Set-up Unit
Standard MoodMaker
Comprises
Master and Auxiliary
Set-up Units with
Scene Select wallplates
Wallplates and mains power
cabling are connected to the
Set-up Unit, which outputs
the 0-10V signals for the
drive units and also provides
overall mains and individual
channel switching.
Product order codes
Set-up Units:
Master: MMSU
Auxiliary: MMSU-AUX
6, 12, or 18-channel
lighting control cabinets
incorporating Set-up
Unit(s) together with full
incoming and outgoing
electrical protection, output
for emergency lighting,
and 10A switching relays
for each channel.
Product order codes
MMCAB6
MMCAB12
MMCAB18
Bedside wallplate
designed specifically
for the Royal Suite
at St Pancras
Renaissance Hotel.
Specials
Bespoke Scene Select wallplates can be designed for specific
applications and can include additional functions, such as
push-buttons.
MoodMaker
Scene Select Wallplates
Up to four Scene Select wallplates can be wired to the
MoodMaker Master Set-up Unit.
Scene selection is made by smooth tactile rotation of a highly
reliable digital encoder which can never be over-rotated.
An LED indicates which of six scenes is selected.
To avoid unnecessary glare in the room, the LED brightness
can be reduced for normal use, while still providing a pulsed
higher brightness for easy viewing during scene selection.
Wallplates are available in a wide range of finishes. Special
finishes are available on request.
Standard finishes available
Cabinet MoodMaker
Installation and technical specification information is available at www.multiload.co.uk/technicalinformation.php
5
Simple manual operation and adjustment
Light levels. The light level for each mood is set up on its own
finger-adjustable preset, with an LED lit above the adjusters
column to show the mood selected on the wallplate.
Fade times. Three adjusters set the fade times between moods,
plus full on and off. These can be set from 1 –60 seconds.
Scene Select wallplate LEDs. The brightness or intensity of the
LEDs on the wallplate(s) can be set using two adjusters inside
the Master Set-up Unit.
Product order codes
Wallplate: MMWP / XX
(where XX denotes finish
specified – see standard
finishes below)
AB
ANTIQUE
BRASS
BMA
ANTIQUE
BRONZE
BL
BLACK
WH
WHITE
GO
GOLD
PB
POLISHED
BRASS
PS
POLISHED
STAINLESS
SS
SATIN
STAINLESS
SC
SATIN
CHROME