Specifications

Easy installation
As our control products are based on universal 0-10V
signalling, they are easy for any electrical contractor to wire
using standard alarm cable for the signals: no need for
expensive data cable or special measures to avoid signal
corruption.
And, we also supply dedicated wiring diagrams for electrical
contractors worldwide, so they can install and troubleshoot
using existing skills.
Low maintenance
We don’t do temperamental at Multiload. Fluctuating voltages
don’t affect our products, so you’ll never have to pay for the
expensive specialists who are needed to re-set and soothe
sensitive digital systems upset by power surges and spikes.
User-friendly
The beauty of our approach is that everything’s familiar and
intuitive. You can see, feel and touch our controls. With no
software or programming involved, you can set sophisticated
scenes and fade between them whenever you like, giving you
total control of your installation.
Good looking
We’re not only functional we’re also fashionable. Our wall
plates come in a range of finishes that will blend or contrast
with any interior design, and we’ll also custom design any
controls to your specification if you prefer. Our controls work
with any light source and you can have many simple rotary
dimmers in different positions around a room.
Totally safe
Safety is one of our key features. Our drivers (LED) and
transformers (LV) conform to the highest safety standards –
even under-water lighting (SELV). And due to our very low
levels of Radio Frequency Interference, our products won’t
interfere with other electrical equipment.
100% consistent
Thanks to our incredibly accurate voltage stability, you can
be sure that whatever lighting effect you choose, it will remain
consistent. The brightness won’t fluctuate and sparkling
colours won’t suddenly lose their lustre. Our products work
brilliantly with lamps from any quality supplier and you can
rely on truly stabilised brightness levels even when dimmed.
Ultra long cable runs
When we say long – we do mean long! You can site our
drivers and transformers huge distances away from the light
sources (even greater than 50m) and still get even, stabilised
brightness. This gives you more scope for design and means
you can keep transformers well away from swimming pools
and wet areas. It’s also much easier to maintain equipment
kept in a convenient area away from the action.
Incredible lamp life
All our drivers and transformers give lamps a longer lease of
life by creating the perfect operating environment. In fact it’s
been proved that our transformers for low voltage 12V and
24V lighting give up to four times the life stated by lighting
manufacturers . . . which is especially good news if you have
high ceilings and need to put up expensive scaffolding every
time you change lamps.
doing things differently ...
why lighting professionals choose Multiload products
light: it pays to be in control
1