Specifications
Concealed Door Sensor
CDS
A fully concealed door operated switch for hinged or sliding
doors, which enables the opening and closing of the doors
to operate lighting or other equipment (such as fans).
The Concealed Door Sensor comprises three component parts:
a switch sensor, a switch activator disc and a control box. The
sensor and activator disc are recess mounted in the door and
frame and can be concealed with veneer or paint. The control
box can handle one or two sensor/ activator disc combinations
to cater for double doors.
Features and benefits
•
Switch activator disc requires no connection.
•
Switch sensor connected only to control box.
•
Control box exterior to furniture requires only SELV wiring
in furniture.
•
Control box in furniture requires mains power, but can reduce
the cable runs to lighting and other equipment.
•
Dual output of control box allows separate control of two
circuits by either door.
•
Control box can be positioned remotely as an actuator for
a control system.
Technical
•
Rating: two separated circuits, each rated at up to 10A.
•
The two Isolated switched output, each having normally open
and normally closed options, can be used to switch any
connected voltage (including 0-10V signal, on or off).
•
Activation zone for sensor by switch activator disc is 12mm.
•
Sensor and its wiring are SELV compatible to Zone 0.
•
Switch sensor fits into 8mm diameter hole. Switch Activation
Disc (5mm deep) fits into shallow 12mm diameter hole.
How to order
All products can be ordered directly
from Multiload Technology or through
our local representative.
Installation design advice
and support
Very few lighting installations are straightforward.
But with careful planning, right from the start, you can
achieve exciting, innovative and successful results that
are economical to maintain.
•
Advice on specification and installation design
•
Customised solutions
•
Project management
•
Global product support
Bespoke solutions
Where a specific custom-engineered product is needed
for a specific function, we work alongside you to give
you the right tools for the job.
www.multiload.co.uk
Product order code
CDS
+44(0)20 7794 9152