Specifications

LEDPowerPlant
Constant voltage LED driver
“Multiload
Technology
make the best
transformers
bar none”
Ray Molony, Editor Lux Magazine
Extremely reliable power supply for linear LEDs which will
outlast more than a few generations of LED sources.
LED PowerPlant gives a truly stabilised DC voltage for 24V
(rating 240W) or 12V (rating 240W) LED sources, which run at
their best at the nominal voltage. Other voltage outputs are
available on request.
Delivers optimum stabilised DC voltage at the LEDs irrespective
of mains voltage fluctuations.
LEDPowerPlant’s unique electronic sensing circuitry allows it to
be positioned great distances from the light sources, solving the
problems associated with positioning and concealing power
supplies.
Exceptionally smooth dimming is achieved by accepting a
standard 0-10V signal. An internal relay completely switches off
the power to the LEDs when the signal is taken below 1V. This,
and remote positioning, greatly simplifies wiring, especially when
dimming, and increases safety using only low voltage cable to
the light source.
It is a true SELV product and is suitable for any sensitive
environment where safety is paramount.
Available as
•
Interior (IP20) LEDPowerPlant. 24V and 12V versions with
rating of 35W to 240W
•
Exterior (IP66) LEDPowerPlant. 24V and 12V versions with
rating of 35W to 240W
Features and benefits
•
Flexible positioning with cable runs typically up to 100m,
ensuring:
•
enhanced design options, with clean and uncluttered
installations.
•
no need to conceal power supplies near LEDs.
•
Stabilised DC voltages with an accuracy better than 99%.
•
Achieves the optimum environment for running linear LEDs.
•
Smooth dimming and switching from an industry standard
0-10V signal.
•
Increases installation safety by use of safe extra low voltage
cable.
•
All safety standards (SELV).
Technical
•
Unique SoftStart circuitry eliminates high surge currents which
occur during switch-on or interruption of the mains supply.
•
Signalling protocol: industry standard 0 -10V.
•
DALI versions available.
Product order codes
Low voltage signal
version:
LEDPP240/24/LVS;
LEDPP240/12/LVS
Switching isolated
signal version:
LEDPP240/24/SIS;
LEDPP240/12/SIS
Installation, technical specification and wiring design information is available at www.multiload.co.uk/technicalinformation.php
9