Owner`s manual

VANNER Incorporated Testing and Troubleshooting
80-Series CAN Power Management System OWNER’S MANUAL
11
Environmental Protection – Your VANN-Guard has been designed to withstand direct exposure to rain
and moisture. The VANN-Guard has also been tested for exposure to direct pressure spray, but continual
exposure to direct pressure spraying may reduce the VANN-Guard serviceable life. Any damage due to
water contamination is covered by Vanner only through the terms of our factory warranty.
Wiring Sequence– The VANN-Guard is internally protected for reverse polarity. The wiring sequence is
not an issue with the VANN-Guard products.
Strain Relief – The VANN-Guard has an integral strain relief. The VANN-Guard is designed with wells for
the lug to sit into to resist bolt loosening from cable movement, and the strain relief is designed to further
inhibit cable movement. The diagram below shows the proper orientation for the attachment of the strain
relief and the #10-32 mounting hardware that is supplied.
MOUNTING SCREWS
CABLE STRAIN RELIEF
LUG WELLS
VANN-Guard