Product specifications

7
MASTERVOLT SOLAR SUNMASTER QS SERIES
MONITORING & CONTROL
The QS Data Monitor also provides means
to connect and monitor max. two pulse
inputs (kWh meters) and one analogue
input, 0-100mV (reference cell). The data
in the data monitor can be downloaded
using the QS Link Wizard software on a
computer connected to the QS Data Bus
directly (via the PC Link) or at a remote
location (via the QS Data Modem, QS
GSM Data Modem or QS Data Transmit-
ter/Receiver). The QS Data Monitor can be
configured to perform automatic checks of
the systems and report to a remote compu-
ter (QS Data Modem) or with sms-messa-
ges to a cellular phone (QS GSM Data
Modem).
6. QS PC Link/
QS PC Link
Industrial
The PC Link is used
to convert the QS Data Bus
into a serial connection to a PC.
The standard QS PC Link is suited for a
small network, i.e. QS Data Bus no longer
than 50m, indoor installation and no more
than 4 devices connected to the bus. For
larger networks you need to use the QS PC
Link Industrial.
Maximal QS Data Bus length in that case is
1000m and maximal no. devices is 256.
10. QS Data Transmitter
The QS Data transmitter is a wireless
transponder of the data that is on the QS
Data Bus. It sends bursts of informa-
tion that can be pic- ked up by several
wireless devices. Communication is
uni-directional, thus only suited for
the display of data.
11. QS Wireless Remote Display
Remote stand alone display that displays
the data sent by the QS Data Transmitter
connected to the QS Data Bus. When a QS
Data Monitor is connected to the QS Data
Bus, also historical data can be displayed.
12. QS Wireless Remote
Display Large
Large info display showing basic data, sent
by the QS Data Transmitter.
13. QS Wireless Data Receiver
PC connector for the wireless receipt of
data from the QS Data Bus. Basic data can
be displayed using the QS Link Wizard
package.
14. QS RCS Pulse Monitor
Basic data monitor for the
monitoring of up to 5 pulse inputs
(kWh meters). The built-in modem can be
configured to send the data automatically
by phone line at programmable intervals
(i.e. daily, weekly, etc.). Data is stored in
daily, weekly and monthly totals. A separa-
te remote software and configuration
package is included.
7. QS Data Modem
The QS Data Modem is an
industrial modem
used to connect the
QS Data Bus to an
analogue phone line.
The modem is factory set to
answer any incoming call and establish a
connection with a standard modem, facili-
tating remote login on the QS Data Bus.
The QS Data Modem has a built-in PC
Link, making it possible to connect a local
PC onto the QS Data Bus at the same time.
8. QS GSM Data Modem
The QS GSM Data Modem is an industrial
modem used to connect the QS Data Bus
to a GSM network. This makes remote
communication possible in places where no
telephone line is available.
9. QS Data Transmitter/Receiver
The QS Data Transmitter/Receiver provi-
des a wireless means of extending the QS
Data Bus. A set of two QS Data Transmit-
ter/Receivers behaves similar to an ordina-
ry QS Data Bus cable, i.e. communication
is bi-directional. Maximum distance that
can be crossed is 800m.
Overview of QS monitoring & control possibilities.