Owner`s manual

VANNER Incorporated Owners Manual
PMEC-12/24 OWNER‟S MANUAL
4
Specifications
PMEC-12/24 Power Management and Engine Start Controller
Model Number
PMEC-12/24
Input Voltage Range (VDC)
8 – 32
Efficiency (Peak)
91%
Max Input Current (AMPS)
100
Output Voltage Range (VDC)
8 - 32
Max Output Current (AMPS)
2 x 50
Max Ripple Voltage (mV)
<100mV RMS
Standby Current (Milliamps)
<20mA @ 24V, <40mA @ 12V
Cooling Method
Convection
Operating Temp.
-40°C to +60°C (-40°F to 140°F)
Storage Temp.
-40°C to +85°C (-40°F to 185°F)
Serviceable
Internal components to be serviced by Vanner personnel only.
Environmental Considerations
Anodized aluminum enclosure provides protection against salt, fungus,
dust, water, fuel vapors and all fluids associated with commercial and off-
highway vehicle operations. IP55 Rated.
Mounting Location
Mount on a flat surface close to the batteries to permit short cable runs.
Location should be protected from battery acid and gases.
Weight (lbs.)
5 lbs (2.3kG)
Dimensional Specifications
(All Dimensions are in Inches)
8.50
.Top View
10.50
3.26
Side View
1.55
2.60
Autostart
Fast Idle
Engine Start
Off
Enable
Panel Mounted Remote