Specifications

15
Combined Sensors and Control Units
Single Head Control Unit
1800 – (18m x 90°)
1800LR – (35m x 12°)
Very stable and high quality combined PIR sensor and lighting controller - all the features of the 1804 and 1803 in one unit.
Automatically switches on lighting or activates CCTV equipment upon detection of movement. 2KW (10A) mains switching
load. Adjustable lights-on timer from 4 seconds to 7 minutes. Adjustable dusk-on control. Can connect up to 7 additional PIR
sensors. Full pan and tilt adjustment with weatherproof enclosure.
Twin Head Control Unit
1802 - (2 x 18m x 90°)
1802LR - (2 x 35m x 12°)
Twin head version of the standard 1800, offering 2 independently adjustable sensors from one unit – all the features of the
1811 and 1803 in one unit. Independently adjustable heads enable coverage of 2 sides of a building when used with the
1806 corner bracket (not supplied) for mounting on a corner.
Command Centres
RS1 Remote Sounder
1805
Provides audible and visual warning alert whenever the PIR sensor detects movement. Sounder on/off button and LED
indicator. For use with PIR sensors, control units and command centres. Internal use only
IBX Command Centre
1809
Provides audible and visual warning alert whenever the PIR sensor detects movement. Also provides manual switching
facility for security lighting. Sounder on/off button and adjustable on-time. LED indicator for lights on. For use with control
units (connectors also provided for additional sounders). Internal use only
TZX Command Centre
1819
All the features of the 1809 but for 2 zones of lighting. Separate buttons and indicators for each zone. Different alert tones
and LED colours for each zone tells you which zone has been activated. Internal use only.
Security Lighting Accessories
Corner Bracket kit
1806
For use with the 1811 twin head sensor and 1802 twin head control unit. Allows units to be mounted on the outside corner of
a building so that both sides can be covered
Pulse Count Module
1821
Allows an 1804 PIR sensor to be upgraded to an 1816 Autoswitch in order to minimise false activations. Pulse count
1, 2, 3 and 4 option with normally open and normally closed relay output with 0-5 minutes timer and transistorised
output. Can be installed inside the wiring compartment of the 1804 or 1811 PIR sensor
Wireless Intruder Alarms
Guardsman Wireless Alarm
GS250
Wireless intruder detection system using wireless PIR sensors with 6m x 90° detection range. Highly po rtable and flexible
system that is suitable for permanent or temporary applications (such as boats and caravans). Supplied with 2 wireless PIR
sensors. Receiver can be set to sound high pitched siren or low volume chime tone. 3 zone capability with each zone able
to support up to 3 detectors. Low battery warning. Weatherproof enclosure for PIR sensors. Supplied as a complete kit with
base receiver with a built-in rechargeable battery, power supply, 2 x PIR movement detectors with wall and table-top mounts
and batteries.
Guardsman Additional PIR Sensor
GS10
Designed for use with the GS250 wireless system. Allows expansion of the system to protect additional zones. 6m x 90
degree detection range. Weatherproof enclosure suitable for both external and internal use. Supplied complete with wall and
table-top mounts and battery.
Guardsman Wireless door Contact and Sounder
GS30
Designed for use with the GS250 wireless alarm system the wireless door / window contact allows convenient placement.
Can be used independently or with the GS250 wireless alarm system. On-board high pitched sounder for local alarm.