Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1424764
Material Safety Data Sheet
6. Accidental Release Measures
Containment Technique:
Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Absorb spill with inert material
(e.g. dry sand, earth).
Clean-up Technique:
Absorb spilled liquid with non-reactive sorbent material. Place material in a plastic bag. Mark bag 'Non-hazardous trash', and
dispose of as normal refuse.
7. Handling / Storage
Handling: Avoid contact with eyes Wash thoroughly after handling.
Storage: Protect from heat. Keep container tightly closed when not in use.
Flammability Class: Not applicable
8. Exposure Controls / Protective Equipment
Engineering Controls: Maintain general industrial hygiene practices when using this product.
Personal Protective Equipment:
Eye Protection: Safety glasses with top and side shields
Skin Protection: Not applicable
Inhalation Protection: Adequate ventilation
Precautionary Measures: Avoid contact with: eyes Wash thoroughly after handling.
9. Physical / Chemical Properties
Appearance: Yellow and clear, liquid
Physical State: Liquid
Molecular Weight: Not applicable
Odor: None
pH: 7.0 at 25°C
Vapor Pressure: Not determined
Vapor Density (air = 1): Not determined
Boiling Point: ~100 °C (~212 °F)
Melting Point: ~0 °C (~32 °F)
Specific Gravity (water = 1): ~1.0
Solubility: Water: Soluble
Acid: Soluble
Other: Not determined
Metal Corrosivity: Not determined
Page 3 of 6