Datasheet

GENERAL SPECIFICATIONS

CONNECTIONS: Outputs 4 mm grounded sockets, remote and scanning via screw terminals at the rear side NUMBER

OF OUTPUTS: 3 OUTPUT VOLTAGE 1: 0.1 - 40 V/DC OUTPUT VOLTAGE 2: 0.1 - 40 V/DC OUTPUT VOLTAGE 3:

0.1 - 6 V/DC INPUT VOLTAGE: 230 V/AC OUTPUT CURRENT 1: 0 - 10 A OUTPUT CURRENT 2: 0 - 10 A OUTPUT

CURRENT 3: 1.5 A OUTPUT: 809 W WEIGHT: 7.5 kg DIMENSIONS (W x H x D): 437 x 88 x 340 mm

TECHNICAL DATA

Residual ripple at nominal load

Output A of Vmax:

Output B of Vmax:

Output C of Vmax:

< 0.025 %

< 0.006 %

Voltage control response at 100 % load change: < 0.04 % (Vmax)

Voltage control response at 20 % mains fluctuation: < 0.005 % (Vmax)

Current control behaviour at 100 % load change: < 5 mA

Current control behaviour at 20 % mains fluctuation: < 5 mA

Operating voltage: 230 V/AC (± 20 %), 47 - 53 Hz

Power consumption (max.): 1000 VA

Mains fuse: slow blow (5 x 20 mm), T6.3A/250V

Operating temperature:

0 ºC to +40 ºC

Relative air humidity: max. 80 %, non-condensing

Protection class: 1

Mains connection: Low-power device installation plug, IEC 320 C14

PACKAGE CONTENT

Laboratory power supply unit // Mains cable // Operating instructions

This data sheet is published by Voltcraft®, Lindenweg 15, D-92242 Hirschau / Germany, Phone +49 180 586 582 7. The data sheet reflects the current

technical specifications at time of print. We reserve the right to change the technical or physical specifications.